• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.131-143
• /
• 2008

Slag mass deposition was required to predict performance accurately of KSLV-I kick motor(KM) system. The validation of the numerical analysis was performed with mass flow rate measured at 4th ground test of the KM. The study described here included internal flow field of KM at various time steps during burning. Slag mass accumulation was computed through the aluminum oxide particle paths to deviate from the gas flow streamlines in flight. These numerical analysis was performed with Fluent 6.3 program The effects for the acceleration, origins and diameters of the aluminum oxide particles was analyzed, finally the total slag mass accumulation was acquired. We confirmed that the slag mass deposition was agreement well with predicted slag mass based on kick motor the grounded test.

• Proceedings of the Technology Innovation Conference
• /
• 2000.06a
• /
• pp.47-64
• /
• 2000

This paper analyses characteristics of the numerical controller industry in market formation and the Flow of information between users and producers and the characteristic of knowledge base of the industry and discusses the difficulties derived, from the characteristics, in accumulation of technological capability In market formation betweenusers and producers, the multi-layered market is not favorable to domestic producers in that lower end market is not large enough to provide cardle market to them which produce inferior quality and lower price than importer products. The credibility of the permance of a product is difficult to prove until a critical mass of products are sold. Therefore gaining market share is deterred by unproven credibility of the performance of the product. The flow of information between users and producers is limited. The flow of information on users environment through mass market to producers is essential for improving credibility of a product. The nature of knowledge base is tacit and the means of knowledge transmission is limited. Technological licensing and reverse engineering, Which have been conventional industry. These characteristics provide conditions of vicious circle in accumulation of technological capability of the numerical controller industry. This paper argues that these characteristics of the industry challenges existing approach to R&D management and framework of science and technology policy.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2001.05a
• /
• pp.411-430
• /
• 2001

This Paper analyses characteristics of the numerical controller industry in market formation and the flow of information between users and producers and the characteristic of knowledge base of the industry and discusses the difficulties derived, from the characteristics, in accumulation of technological capability In market formation between users and producers, the multi-layered market is not favorable to domestic producers in that lower end market is not large enough to provide cradle market to them which produce inferior quality and lower price than imported products. The credibility of the performance of a product is difficult to prove until a critical mass of products are sold. Therefore gaining market share is deterred by unproven credibility of the performance of the product. The flow of information between users and producers is limited. The flow of information on users environment through mass market to producers is essential for improving credibility of a product. The nature of knowledge base is tacit and the means of knowledge transmission is limited. Technological licensing and reverse engineering, which have been conventional means of knowledge transmission, are not useful in the numerical controller industry. These characteristics provide conditions of vicious circle in accumulation of technological capability of the numerical controller industry. It is conjectured that these characteristics are derived from the fact that the numerical controller is the result of IT based technological convergence in controlling machining process. This paper argues that these characteristics of the industry challenges existing approach to R&D management and framework of science and technology Policy.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.336-344
• /
• 2020

The prediction and evaluation of driftwood accumulation around river-crossing structures are essential because driftwood accumulation increases during flood disasters. In this study, the driftwood accumulation and behavior around bridge piers were evaluated via a numerical model that could be employed to analyze three-dimensional turbulent flow and driftwood motion. The moving particle semi-implicit-based model for driftwood motion was sensitive to the number of spheres. The numerical results showed that the approach velocity and the ratio of driftwood length to pier width were the key factors influencing driftwood accumulation, whereas the driftwood density had only a minor influence. Overall, it is expected that this study will contribute to the development of improved risk evaluation indexes for assessing driftwood accumulation around river-crossing structures.

• Journal of the Korean Society of Visualization
• /
• v.3 no.2
• /
• pp.45-50
• /
• 2005

Electro-osmotic flow (EOF) instability in a microchannel has been experimentally investigated using a micro-PIV system. The micro-PIV system consisting of a two-head Nd:Yag laser and cooled CCD camera was used to measure instantaneous velocity fields and vorticity contours of the EOF instability in a T-shape glass microchannel. The electrokinetic flow instability occurs in the presence of electric conductivity gradients. Charge accumulation at the interface of conductivity gradients leads to electric body forces, driving the coupled flow and electric field into an unstable dynamics. The threshold electric field above which the flow becomes unstable and rapid mixing occurs is about 1000V/cm. As the electric field increases, the flow pattern becomes unstable and vortical motion is enhanced. This kind of instability is a key factor limiting the robust performance of complex electrokinetic bio-analytical devices, but can also be used for rapid mixing and effective flow control fer micro-scale bio-chips.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1100-1106
• /
• 2009

A debris flow is known as that flood and landslide of water cause much physical human damages worldwide to complex natural disaster that happen combining and happy event is happening mainly in urgent mountains area in domestic. Because happen about debris flow that happen from each place every year and is drift, mechanism of accumulation definitely make clear and great many damage is not running out. Must grasp actual conditions of priority debris flow to need debris flow prevention countermeasure and lay countermeasure to take away damage by debris flow. Because collecting actual conditions of debris flow that happen by objective investigation methods and accuracy, proposed about investigation calamity investigation method so that can calculate debris flow damage and prepare in subsequentness damage.

• Journal of Information Technology Applications and Management
• /
• v.18 no.1
• /
• pp.75-100
• /
• 2011

For decades, thousands of corporation introduced knowledge management systems to respond knowledge-based society. However, it seems that the systems merely focusing on knowledge accumulation and its sharing have been bounded by many restrictions in terms of new knowledge creation based on the life cycle of knowledge management systems. Moreover, recently, a variety of knowledge management activities regarding organization, systems, and process is emphasized as a strategic asset for a corporation to create core knowledge. Therefore, this study adopted the Csikszentmihalyi's flow theory to investigate the factors affecting knowledge creation and the success factors of knowledge management systems in virtual space. Prior studies argued that flow experience should be a prerequisite for creative knowledge creation. In that vein, this research revealed the causal relationships for flow experience between the determinants of clear goal, immediate feedback, congruence of challenge and skill. Additionally, it empirically examined how flow experience affected the exploratory behavior of knowledge creation.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.169-170
• /
• 2019

지구단위계획에 의한 택지개발 등의 현장에서 빈번하게 발생하는 토공은 우기 시에 많은 양의 토사침식이 우려된다. 따라서 현장에서 물관리는 매우 중요하며 이를 간과했을때는 대형 재해로 연결 될 수 있으므로 중요하다. 이들 지역은 대부분 소규모지역이므로 수문해석에 필요한 DSM을 드론사진측량으로 손 쉽게 구축할 수 있으며 이를 이용하여 유역면적의 파악, Flow direction, Flow accumulation을 분석한다면 준공까지 효율적으로 물관리가 가능하다.

• Molecules and Cells
• /
• v.41 no.11
• /
• pp.964-970
• /
• 2018

Atherosclerosis preferentially involves in prone area of low and disturbed blood flow while steady and high levels of laminar blood flow are relatively protected from atherosclerosis. Disturbed flow induces endoplasmic reticulum (ER) stress and the unfolded protein response (UPR). ER stress is caused under stress that disturbs the processing and folding of proteins resulting in the accumulation of misfolded proteins in the ER and activation of the UPR. Prolonged or severe UPR leads to activate apoptotic signaling. Recent studies have indicated that disturbed flow significantly up-regulated $p-ATF6{\alpha}$, $p-IRE1{\alpha}$, and its target spliced XBP-1. However, the role of laminar flow in ER stress-mediated endothelial apoptosis has not been reported yet. The present study thus investigated the role of laminar flow in ER stress-dependent endothelial cell death. The results demonstrated that laminar flow protects ER stress-induced cleavage forms of PARP-1 and caspase-3. Also, laminar flow inhibits ER stress-induced $p-eIF2{\alpha}$, ATF4, CHOP, spliced XBP-1, ATF6 and JNK pathway; these effects are abrogated by pharmacological inhibition of PI3K with wortmannin. Finally, nitric oxide affects thapsigargin-induced cell death in response to laminar flow but not UPR. Taken together, these findings indicate that laminar flow inhibits UPR and ER stress-induced endothelial cell death via PI3K/Akt pathway.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.189-196
• /
• 2011

The objective of this study was to investigate the effects of light intensity and electrical conductivity (EC) of nutrient solution during short day treatment in an ebb and flow systems on the growth and nutrient uptake of potted Kalanchoe blossfeldiana 'Rako' and the nutrient accumulation of growing medium. Nutrient concentrations in the growing medium were also analyzed to investigate the accumulation rates of macro-nutrients such as T-N, P, K, Ca, and Mg, respectively. To achieve the objectives, plants were fed with a nutrient solution with 1.2, 1.8, or $2.4dS{\cdot}m^{-1}$ under three daily photosynthetic photon flux (PPF) of 4.26, 5.51, or $9.75mol{\cdot}m^{-2}{\cdot}d^{-1}$. Both light intensity and EC of nutrient solution significantly influenced the crop growth. The elevation of PPFs resulted in the increase of plant growth. For each light condition, plant growth, such as dry and fresh weight and leaf area, was the highest when the electrical conductivity of nutrient solution was controlled to $2.4dS{\cdot}m^{-1}$. However, growth was acceptable in the EC ranges from 1.8 to $2.4dS{\cdot}m^{-1}$. Both light intensity and EC of nutrient solution significantly influenced the uptake of nutrients in the solution tanks and the accumulation of nutrients in the growing medium. As the EC of nutrient solution was elevated, the absorption rates of $NO_3^-$, $PO_4^{-3}$, $K^+$, and $Mg^{2+}$ by crops and accumulation of those in growing medium increased, but the light intensity did not significantly influence the absorption rates. Based on the above results, the regression models were suggested for anticipating the macro-nutrient accumulations in growing medium.