• 에너지공학
• /
• 제24권1호
• /
• pp.24-31
• /
• 2015

바닥복사난방 공간에서 생활특성과 착의량에 따른 열쾌적 범위를 제시하고 각 조건별 에너지사용량 및 비용을 산출하여 비교하는 것을 목적으로 하였다. 좌식생활이 입식생활보다 낮은 온도에서 중립적 온도를 나타냈는데 바닥표면과 인체사이의 국부적인 열전달이 전신온열감에 영향을 주었기 때문으로 판단된다. 착의량이 높을수록 낮은 온도에서 중립점 온도를 나타냈는데 착의량을 증가시키면 인체에서 방출되는 열손실이 감소하여 낮은 실내온도에서 동일한 열쾌적을 느낄 수 있기 때문으로 판단된다. 좌식생활방식이 입식생활방식보다 평균 6.0%의 에너지 사용량이 절감되는 것으로 나타나 좌식생활이 경제적인 생활방식으로 분석되었다. 착의량 1.2 Clo 상태가 착의량 1.0 Clo 상태보다 평균 13.5%, 착의량 0.8 Clo상태보다 평균 18.0%의 에너지 사용량이 절감되는 것으로 나타나 동절기에 착의량을 증가시키는 생활습관의 변화만으로도 에너지 절감 효과가 큰 것으로 분석되었다.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.277-297
• /
• 2014

Since the isolation bearings undergo large displacements in base-isolated structures, impact with adjacent structures is inevitable. Therefore, in this investigation, the effect of impact on seismic response of isolated structures mounted on double concave friction pendulum (DCFP) bearings subjected to near field ground motions is considered. A non-linear viscoelastic model of collision is used to simulate structural pounding more accurately. 2-, 4- and 8-story base-isolated buildings adjacent to fixed-base structures are modeled and the coupled differential equations of motion related to these isolated systems are solved in the MATLAB environment using the SIMULINK toolbox. The variation of seismic responses such as base shear, displacement in the isolation system and superstructure (top floor) is computed to study the impact condition. Also, the effects of variation of system parameters: isolation period, superstructure period, size of seismic gap between two structures, radius of curvature of the sliding surface and friction coefficient of isolator are contemplated in this study. It is concluded that the normalized base shear, bearing and top floor displacement increase due to impact with adjacent structure. When the distance between two structures decreases, the base shear and displacement increase comparing to no impact condition. Besides, the increase in friction coefficient difference also causes the normalized base shear and displacement in isolation system and superstructure increase in comparison with bi-linear hysteretic behavior of base isolation system. Totally, the comparison of results indicates that the changes in values of friction coefficient have more significant effects on 2-story building than 4- and 8-story buildings.

• 한국식품영양과학회지
• /
• 제33권10호
• /
• pp.1653-1660
• /
• 2004

부산시내 초등학교 5곳을 방문하여 현 급식소에서 보유하고 있는 급식시설$.$설비에 대한HACCP 적용시 중점관리점을 파악하기 위하여 위생평가를 실시하였다. 학교 급식 시설$.$설비는 학교급식소에서 사용하고 있는 천장, 벽, 바닥, 트렌치, 그리스 트랩, 후드, 방충망, 덤웨이터 등 총 8곳으로 분류하여 총균수, 대장균군수 측정을 통해 위생상태를 확인하였다. 급식시설$.$설비 표면의 위생상태를 검사한 결과 천장, 벽을 제외한 나머지에서 $10^4$∼$10^{6}$ CFU/100 $\textrm{cm}^2$의 세균이 검출되어 여전히 학교급식소의 위생수준이 낮은 것으로 파악되었고 특히, 그리스 트랩의 경우가 가장 위생상태가 불량한 것으로 나타났다. 대장균군수의 경우는 천장을 제외한 나머지 장소에서 $10^2$∼$10^4$ CFU/100 $\textrm{cm}^2$의 세균이 검출되었고 그리스 트랩에서 가장 높은 수의 세균과 대장균이 발견되어 특별히 관리 해야 되는 부분으로 확인되었다. 또한 학교급식 시설$.$설비의 하절기 및 동절기의 위생상태를 알아보고 중점 관리 점을 제시하기 위하여 급식 후 세 척 및 소독을 실시한 다음 시간 및 요일의 경과에 따른 오염도를 측정한 결과, 하절기에는 매일 소독을 실시해야 하는 바닥, 트렌치, 그리스 트랩, 덤웨이터의 경우는 급식 전에 소독을 실시한 후 급식을 시작해야 하는 것으로 나타났고, 주 1회 소독을 실시 하는 벽, 후드, 방충망은 주 3회 이상으로 소독횟수를 늘려 실시해야 하는 것으로 나타났다. 동절기에는 바닥, 트렌치, 덤웨이터의 경우는 현재와 마찬가지로 급식 후에 소독을 실시하여야 하는 것으로 나타났고 그리스 트랩의 경우는 급식 전에 실시한 후 급식을 시작해야 하는 것으로 나타났다. 벽, 후드, 방충망은 주 2회 이상으로 소독횟수를 늘려 실시해야 하는 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.273-280
• /
• 2000

Building structures which are in need of large open space make the damping effect of the structures decrease greatly. Assembly and office buildings with a lower natural frequency have a higher possibility of experiencing excessive vibration induced by human activities. These excessive vibration make the residents uncomfortable and the serviceability deterioration. The loads induced by human activities were classified into two types. First type is in place loads as like jumping, foot stamping and body bouncing. The other type is moving loads as like walking, running and dancing. A series of laboratories experiments had been conducted to study the dynamic loads induced by human activities, The earlier works were mainly concerned to parameters study of dynamic loads as like activity type, weight, sex, surface condition of structure and etc. In this paper, we have measured directly the walking loads by using the platform. And we have evaluated and analyzed load-time history of walking loads. One of the most important parameter is pacing rate (walking speed) in the walking loads. The difference between the maximum value and minimum value of walking loads depends on the walking speed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.30.5-30
• /
• 2001

This paper describes a new design of blimp having wheeled vehicle part. This system can work both on the ground using wheeled vehicle and in the air using the floating capability of the blimp part. The passive wheeled mechanism in the vehicle part enables the stable taking off, landing on as well as it is greatly helpful to keep a stationary position on the floor. On the other hand, the floating capability enables the wheeled blimp to fly freely regardless of the ground condition or obstacles. The wheeled blimp can be used as an agent robot for the tole-presence application. Using multimedia devices such as camera, speaker, LCD and microphone mounted on the blimp surface, this system can get necessary information at the local site and communicate with person from a distance. As a typical tele-presence application, the wheeled blimp is currently being developed to a tole-guidance robot working in public indoor areas such 35 exhibition halls, departments, hospitals, etc ...

• 한국화재소방학회논문지
• /
• 제33권4호
• /
• pp.89-96
• /
• 2019

본 연구에서는 우선경보방식으로 경보음이 발생되는 경우 발화층과 직상층 이외의 다른 층으로도 전달되는 경보음에 대하여 건축음향 시뮬레이션을 활용하여 서로 다른 엘리베이터 배치를 갖는 3가지 조건에 대하여 예측하였다. 엘리베이터 샤프트에 흡음재가 설치되어 있지 않은 현재 조건으로 예측한 경우, 경보 발생층에서 멀어질수록 전달되는 경보음 크기는 작아졌지만, 3개층이 떨어진 경우에도 약 54 dB(A)~56 dB(A) 크기로 전달되어 일반적인 공동주택의 배경소음 보다 크게 전달되는 것으로 예측되었다. 이전 연구에서 개선안으로 제시된 엘리베이터 샤프트에 흡음재를 적용한 결과 인접층으로 전달되는 경보음 레벨은 약 12 dB~16 dB 정도 작아질 수 있는 것으로 예측되었다. 이는 공동주택의 배경소음 레벨과 유사하거나 작은 정도로 국가화재안전기준에서 규정한 일제경보방식의 의도대로 경보음이 발생되는 발화층과 직상층 이외의 층으로 전달되는 현상을 개선할 수 있을 것으로 판단된다.

• Advances in materials Research
• /
• 제4권3호
• /
• pp.165-178
• /
• 2015

Friction coefficient of epoxy metal matrix composites were investigated. The main objective was to increase the friction coefficient through rubber sole sliding against the epoxy floor coating providing appropriate level of resistance. This was to avoid the excessive movement and slip accidents. Epoxy metal matrix composites were reinforced by different copper wire diameters. The epoxy metal matrix composites were experimentally conducted at different conditions namely dry, water and detergent wetted sliding, were the friction coefficient increased as the number of wires increased. When the wires were closer to the sliding surface, the friction coefficient was found to increase. The friction coefficient was found to increase with the increase of the copper wire diameter in epoxy metal matrix composites. This behavior was attributed to the fact that as the diameter and the number of wires increased, the intensity of the electric field, generated from electric static charge increased causing an adhesion increase between the two sliding surfaces. At water wetted sliding conditions, the effect of changing number of wires on friction coefficient was less than the effect of wire diameter. The presence of water and detergent on the sliding surfaces decreased friction coefficient compared to the dry sliding. When the surfaces were detergent wetted, the friction coefficient values were found to be lower than that observed when sliding in water or dry condition.

• KIEAE Journal
• /
• 제6권1호
• /
• pp.25-32
• /
• 2006

Regarding to the Domestic housing politics to improve residing environment and effective use of country land, apartment buildings have been constructed since early of 1970s. Now apartment is taking over 50% out of entire housing in Korea. In the view point of PV application to the apartment, PV has amny advantages because of the wideness of out-walls and high floors building in APT. Therefore, if APT could use the electricity produced by BIPV, we can solve more easily environment and energy problems caused by housing. The research conclusion by analysing conditions and application method to introduce BIPV application to APT in near future is as below. -The out look of APT has been developed periodically and recently gable roof or canopy is popular which PV installation is more favorable. -For Balcony part with double skin facade sassy window, It has a preferable condition to install on the wall depending on the window direction. -In case of shorter distance between buildings due to high ratio of outside measurement, it is more desirable to install PV on the roof than on the wall of Apartment by considering low solar altitude. -Also depending on the direction of APT building, it is more effective and productive in electricity in the broad surface of side wall of APT. -In case of superhigh floor APT where facade system is mostly double skin facade of curtain wall system, PV module can replace the traditional curtain wall and will reduce architectural materials and obtain various out look design thereof.

• 설비공학논문집
• /
• 제25권1호
• /
• pp.14-19
• /
• 2013

The present study has been conducted for evaluating and comparing the performance of the underfloor air distribution system(UFAD) and the ceiling based air distribution system(CBAD) under cooling condition. Simulations and experiments were carried out for verifying the model by TRNSYS program about UFAD and CBAD. The results of simulation for various conditions of thermal load are summarized as followings. UFAD had an advantage for making thermal comfort because of lower temperature of the floor surface. Moreover, UFAD showed lower fan power about 30~50% than CBAD under the same conditions of thermal load. The energy saving rates of UFAD were increased to 17.7% in proportion to the thermal load on unoccupied zone(lighting). Ultimately, additional investigations should be done for analyzing optimized operating conditions of UFAD with considering the thermal performance of building envelop and the thermal load.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.357-371
• /
• 2016

Buildings in the city acts as a cause of distorted wind direction, wind speed, causing the stagnation of the air flow. In the recent trend of climate change can not but consider the temperature rise of the urbanization. This study was aimed to analyze the thermal comfort of planetary boundary layer in different artificial constructions areas which has a direct impact on urban climate, and estimating the warming phenomena. Envi-met model was used to consider the urban structure associated with urban growth in order to precisely determine the impact of the building on the city weather condition. The analyzed values of thermal comfort index were temperature, wind speed, horizontal and vertical turbulent diffusivity. In particular, analysis of the PPD(Predicted Percentage of Dissatisfied) represents the human thermal comfort. In this study, by adjusting the arrangement and proportion of the top floor building in the urban it was found that the inflow of the fresh air and cooling can be derived low PPD. Vertical heat flux amount of the city caused by climate change was a factor to form a high potential temperature in the city and the accumulation of cold air does not appear near the surface. Based on this, to make the city effectively respond to climate change may require a long-term restructuring of urban spatial structure and density management.