• Title/Summary/Keyword: floor materials

검색결과 717건 처리시간 0.027초

호우로 인한 바닥 마감용 화강석 침수 후 건조상태에 따른 물성변화에 관한 연구 (Research on Physical Changes Based on Drying After Downpour Penetration of Floor Finishing Use Granite Stone)

  • 안기원;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 춘계 학술논문 발표대회
    • /
    • pp.173-174
    • /
    • 2015
  • This research takes granite stone based floor finishing exposed to concentrated downpouring and observes the material's physical changes, adhesiveness, compressive strength under wet conditions. The results of the experiments shows that elution of sulfide mineral can occur when granite stones are exposed to downpour, but short term exposure shows little physical changes to the material. This indicates that if post maintenance is properly enacted, long term usage of granite stone materials is also possible.

  • PDF

PCM을 혼입한 방통 모르타르의 열적 성능 평가에 관한 실험적 연구 (An Experimental Study on the Evaluation of Thermal Performance of Floor mortar with PCM)

  • 김보현;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
    • /
    • pp.5-6
    • /
    • 2011
  • CO2 reduction is the most urgent issue the world is facing. So, there should be a measure to reduce the CO2 emission in construction industry which has more released CO2 gas than other industries. CO2 emission of building depend on using energy. Then efficient energy use process working efficiently at CO2 reduction. Therefore In this study, author find the technical possibility of saving the building energy using the PCM which is able to control heat, storage heat and potential heat. So, it considered that apply to floor heating type which is major heating system of living space in Korea. And evaluate the Using possibility.

  • PDF

다중이용업소 실내마감재료 사용기준에 관한 연구 (A Study on Using the Interior Finishing Material using Regulation at Multiple-using Businesses)

  • 김용성;조성오
    • 한국실내디자인학회논문집
    • /
    • 제22권5호
    • /
    • pp.216-224
    • /
    • 2013
  • There are the relevant provisions that apply to building regulations about the Building codes, Fire Protection laws, and more Multi-using interior finish materials businesses etc. The differences between these regulations are as follows: The Building codes is defined the main use of the building according to facilities to used to set the scale by the use of the floor space, On the other hand, Fire Protection laws are the basic purpose and the act of using the architectural space(or sales) by separating object by fire. And Multiple-using Businesses Facilities consist of two regulations engaged in the kind of law and the size of the floor area. One building can not be based on operating facilities and together in Multiple use businesses Law. As such, the Buildings are applied to the Building codes, Fire Protection laws, such as Multi-using Businesses Facilities interior construction industry due to the structural differences in the position of the designer feeling a lot of difficulties and confusion. The Multi-use businesses Facilities engage in the kind of law, the size of the floor area and seating capacity. These can not be based on operating facilities, and consists of two regulations together in one building. This study is purposed to help improving the finish of the interior architecture that is related to the Building code regulations, Fire Protection laws, Multi-using Facilities interior finishing material relevant with the provisions from the law through analyze the case of developed countries, and the current Multiple use Businesses Facilities research range from the law of multiple-using facilities, interior finishing, interior architecture for supervision reasonably and compensation for the interior design. So, Result is as follows: First, interior decorations can be separated the fixed material and the moveable things. second, It should be included multi-using Business though small size business space at the basement floor. third, It should be established statute law that design and construction responsibility. forth, re-testing fire resist performance after some period. and finally, it need to mitigate regulation where be installed sprinkler.

Airtightness of Light-Frame Wood Houses built in Daejeon and Chungnam Area

  • Jang, Sang-sik;Ha, Been
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권2호
    • /
    • pp.147-158
    • /
    • 2017
  • Among the energy consumption in building, the heating energy takes the largest part. Therefore, it is important to minimize the heat energy loss in building for the reduction of overall energy use in construction. The most important points for the minimization of energy loss in building are insulation and airtightness. Especially, in wood houses, airtightness is very important for energy saving as well as increase of durability. However, the researches on airtightness of wood buildings have been started recently and are very deficient especially in Korea. In this study, air leakage properties and airtightness performance were evaluated for light-frame wood houses built in Daejeon and Chungnam area. Total 7 houses were evaluated, among which four houses (Case 1 to Case 4) were in the construction stage before interior finish and the other three houses (Case 5 to Case 7) were after completion of construction work. The tests for airtightness were conducted by pressurization-depressurization method, and the factors included in the measurements includes air leakage rate at 50 Pa (CMH50), air change rate at 50 Pa (ACH50), equivalent leakage area (EqLA) and EqLA per floor area. As a result of this study, key air leakage points in wood houses were found to be the gaps between floor and wall, the holes for wiring and plumbing, the double glasses windows and the entrance doors. The average value of ACH50 for the houses after completion of construction work was $3.5h^{-1}$ that was similar to Europe standard ($3.0h^{-1}$). ACH50 was proportional to EqLA per floor area but inversely proportional to the internal volume, the net floor area and the area of window.

숭례문 화재의 감식 사례 연구 (A Case Study of the Sungnyemun Fire for Identification)

  • 최승복;이정진;황태연;이창우;최돈묵
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2009년도 춘계학술대회
    • /
    • pp.1-6
    • /
    • 2009
  • 국보 1호인 숭례문 화재는 화재조사자뿐만 아니라 국민들에게 크나큰 아픔을 안겨 주었다. 이 연구의 목적은 현장조사를 통하여 목조 문화재 화재 시 생성되는 연소패턴과 목재 마루바닥에 인화성물질을 살포 후 착화하였을 때 나타나는 촉진제에 의한 연소 흔적 등을 확인하는데 있다. 또한 이 연구결과는 유사한 화재 발생 시 화재조사요원에게 정확한 화재 원인을 감식할 수 있는 자료가 될 것이다.

  • PDF

A Study on Properties of PVA/$SiO_2$ Organic-inorganic Hybrid Materials Barrier Layer Coated on Flexible Substrate (PEN)

  • Koo, Tae-Wook;Farva, Umme;Yu, Eric S.H.;Kim, Yun-Su;Park, Chin-Ho
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.657-659
    • /
    • 2008
  • Barrier coating properties of PVA/$SiO_2$ on the flexible substrates (PEN) have been investigated. Thin layer of PVA/$SiO_2$ organic-inorganic hybrid materials were deposited on PEN substrate by the spin-coating. The optical properties and surface roughness of barrier layer on flexible substrate were characterized by AFM, UV-Vis and WVTR/ OTR.

  • PDF

숭례문 화재감식 사례 연구 (An Identification of Sungnyemun Fire as a Case Study)

  • 최승복;이상준;이승훈;최돈묵
    • 한국화재조사학회논문지
    • /
    • 제11권1호
    • /
    • pp.74-82
    • /
    • 2008
  • 국보 1호인 숭례문 화재는 화재조사자뿐만 아니라 국민들에게 크나큰 아픔을 안겨 주었다. 이 연구의 목적은 현장조사를 통하여 목조 문화재 화재 시 생성되는 연소패턴과 목재 마루바닥에 인화성 물질을 살포 후 착화하였을 때 나타나는 촉진제에 의한 연소 흔적 등을 확인하는데 있다. 또한 이 연구결과는 유사한 화재 발생 시 화재조사요원에게 정확한 화재 원인을 감식할 수 있는 자료가 될 것이다.

  • PDF

최근 서울시 중형 OFFICE 건물의 실내재료의 사용경향에 관한 연구 (A Study on the Using Trends of Interior Materials in Current Medium Size Office Building in Seoul)

  • 김은중
    • 한국실내디자인학회논문집
    • /
    • 제23호
    • /
    • pp.19-25
    • /
    • 2000
  • This study aims by analysing the interior design elements trends of current medium size office buildings in Seoul. The analysing objects are ceiling, floor, wall, and illumination plan of current office buildings. Analysing tools are finishing material and color of each part. Analysing areas are lobby area, deskwork area, conference area, welfare area, public area(rest room, corridor, stair). The interior design elements of lobby shows a lots of different features then the other areas in ceiling, floor, and wall design. Such difference appears at finishing material especially, and the coloring is more splendorous then the other areas. Desk work area and conference area have similar characteristics in finishing materiors and colors, and they usually follow the needs of function. Walfare area shows more splendorous feature then deskwork and conference area, and designed by various materials and colors. Public area also shows very active design concept then past times.

  • PDF

수반응 우레탄과 바닥용 경질 폴리우레탄을 이용한 바닥마감재의 성능향상에 관한 실험적 연구 (A study on the improvement for performance of floor finishing materials using poly urethane with water reacting urethane)

  • 박진상;강효진;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
    • /
    • pp.43-46
    • /
    • 2006
  • In this study on the appliable Asphalt sheet of monolithic and inorganic matter waterproofing material using of field because of problem of complex waterproofing sheet. Before this cement polymer modified waterproof coating and appliable asphalt sheet of monolithic whether have stability by method of construction about all style waterproofing that evaluate to new method of construction development naturally big emphasis put and try to approach. Did performance test item first at, as a result, drew by suitable thing in all KS items. This is considered to have more effective spot construction work because if means that have stability by material as well as method of construction.

  • PDF

BF 인증기준의 바닥 안전성에 관한 정량적 평가지표 검토 (A Review of the Quantitative Evaluation Indexes of Barrier-Free Certification for Floor and Ground Surfaces Safety)

  • 지석원;백권혁;최수경
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.27-28
    • /
    • 2021
  • For Barrier-Free certification, the floor and ground surfaces must be finished with materials that are not slippery, flat, and have low-impact in fallis. However, the BF Certification Act does not provide specific methods to meet these regulations. In performance-based design, the responsibility of proving the performance rests with the building owner and architect, so quantitative evaluation indexes are needed to select suitable materials. Furthermore, changes in performance after completion should be checked periodically in 'As-Is' conditions. There are various methods for slips, trips and falls risk assessment, causing confusion for users. In this study, the results of previous studies on the evaluation methods of slips, trips and falls were considered closely, and each quantitative evaluation index that can be used in the new construction and maintenance phase was presented.

  • PDF