• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 추계학술발표논문집
• /
• pp.47-53
• /
• 1999

• 한국환경과학회지
• /
• 제9권4호
• /
• pp.331-337
• /
• 2000

The variation of microorganisms (activated slude, Saccharomyces cerevisiae, Aureobasidium pullulans) caused by the biosorption of $Pb^{2+}$ was observed by TEM and microscope. By the TEM observation of S. cerevisiae, the plasmolysis and lysis of cell wall or cell membrane were occurred by the penetration of $Pb^{2+}$ into the inner cellular region. However, in the case of A. pullulans, the plasmolysis and lysis of cell wall or cell membrane were not occurred because of the prevention of $Pb^{2+}$ penetration by the extracelluar polymeric substances (EPS). A flocculation of microorganisms, in the case of A. pullulans, was observed by the $Pb^{2+}$ accumulation after 3~4 h and the color was changed from white to black after 1 day. The flocculation of activated sludge was improved by the accumulation $Pb^{2+}$ after 1 h, however, the floc was broken up and the settling efficiency decreased after 1 day.

• Korea-Australia Rheology Journal
• /
• 제15권1호
• /
• pp.27-33
• /
• 2003

Associating polymers are hydrophilic long-chain molecules to which a small amount of hydrophobic groups (hydrophobes) is incorporated. In aqueous solution, the association interactions result in the formation of three-dimensional network through flowerlike micelles at high concentrations. In colloidal suspensions, the associating polymers act as flocculated by bridging mechanism. The rheological properties of suspensions flocculated by associating polymers end-capped with hydrophobes are studied in relation to the bridging conformation. At low polymer concentrations, the polymer chains effectively form bridges between particles by multichain association. The suspensions are highly flocculated and show typical viscoelastic responses. When the polymer concentration is increased above the absorbance at saturation, the excess polymer chains remaining in the solution phase build up three-dimensional network by associating interactions. Since the presence of particles does not significantly influence the network structures in the medium, the relative viscosity, which gives a measure of the degree of flocculation is decreased with increasing polymer concentration. The bridging conformation and flocculation level vary strongly depending on the polymer concentrations.

• 한국환경과학회지
• /
• 제20권5호
• /
• pp.639-645
• /
• 2011

This study found that flotation efficiencies for removing algae and micro particles in raw water were optimized on mixing intensity and time of the mixing and flocculation conditions with a continuous DAF system. It is more efficient for mixing intensity at 23.1 $s^{-1}$ and time at 660 s(Gt value : 15246) to float flocculated floc with the raw water in M water treatment plant. Flotation efficiency was more than about 0.9 when operated pressure and A/S ratio were sustained at 5 $kg_f{\cdot}cm^{-2}$ and up to 0.056 $mL{\cdot}mg^{-1}$. The continuous DAF system made by the study could be continuously operated for 20 days and sustained not exceeding 4 NTU with raw water with low turbidity(13.4~9.8 NTU).

• 상하수도학회지
• /
• 제9권4호
• /
• pp.63-72
• /
• 1995

The mean velocity gradient, G, has been used as a principal design and operation parameter for flocculation unit. This paper questions that significance. The physical and qualitative meaning of collision efficiency factors of each transport mechanism (Brownian motion, fluid shear, and differential sedimentation) are reviewed. The overall collision frequency function is calculated by summing up the collision frequency function of each mechanism. In the collision of two particles of different size, a diagram showing the dominant region in which each mechanism is important is developed and the meaning of the diagram is discussed. The primary ramification of this curvilinear, heterodisperse approach is that G is found to be not nearly so important. Previous experimental work in which the role of G has been examined is reviewed in light of this finding.

• Journal of Microbiology and Biotechnology
• /
• 제1권3호
• /
• pp.207-211
• /
• 1991

Yeast fermentation at $40^{\circ}C$ was conducted for microbial protein production and COD reduction in three different sugar beet stiIlages by a thermo- and acid-tolerant yeast Candida rugosa isolated from East Africa. The assimilation proceedings of some main components such as protein, carbohydrate, total titrable acids and glycerol in stillages were observed with growth kinetics of the yeast. Most of glycerol and organic acids were rapidly assimilated at the beginning of the fermentation. Protein assimilation was slowly accelerated with the proceeding of fermentation time and its assimilation rate reached only 14.2%-28.4%. Though Candida rugosa was a flocculent yeast, the flocculation characteristics of the yeasts grown in three stillages were different from each other.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.75-78
• /
• 1995

In this paper it is concerned to develop control method using jar-test results in order to predict the optimum dosage of coaglant, PAC(PoliAluminum Chloride). Considering the relations with the reactions with the reaction of coagulation and flocculation, the five independent variables ( e, g, turbidity of raw water, water turbidity in flocculators, temperature, pH, and alkalynity) are selected out of parameters and they are put into calculation to develop a neural network model for PAC dosing process in water purification system. This model is utilized to predict optimum dosage of PAC. That is, the optimum dosage of PAC is searched in neural network model for PAC dosing process to minimize the water turbidity in flocculators. This searching is implemented by means of expert heuristics. The efficacy of the proposed contorl schemem and feasibility of acquired neural network model for PAC dosing contorl in water purification system is evaluated by means of computer simulation.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.10-16
• /
• 2004

Structures and strengths of paper have been studied by analyzing fibers characteristics depending on refining methods. Mixing ratio of softwood and hardwood fibers and fibers characteristics have been analyzed for paper quality improvement. In this study flocculation and drainage of fibers were analyzed to improve the production efficiency and paper product's quality. Floc size and drainage rate depending on stock consistency and fines content were analyzed. Total amount of drainage during drainage process was measured quantitatively by using DI(drainage index). Floc size, viscosity of floc and dewatering times were also measured. In the case of refining load $2.8 kg_f$ , drainage was occurred by filtration mechanism rather than thickening mechanism because drainage resistance increased by fibrillation of fibers. Therefore, the drainage rate of $2.8 kg_f$ refining load stock was slower than that of $5.6 kg_f$.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.109-114
• /
• 1999

The deposition kinetics of fines on fibres was studied to elucidate the flocculation mechanism of a PAM/bentonite retention aid. It is shown that polymer-induced co-flocculation is not permanent. This phenomenon is attributed to a stabilising effect of polymer transfer between surfaces. The resulting polymer layers have a reduced bridging ability with naked surfaces. The addition of bentonite increases the bond strength between fibres and fines, and links non-briding layers. These results explain the positive influence of bentonite on fines retention.

• 생태와환경
• /
• 제44권1호
• /
• pp.66-74
• /
• 2011

This numerical study aims to investigate the effect of cohesive sediment on turbulence structure due to density stratification. The transport model for cohesive sediment incorporated with flocculation model has been selected and calculates the concentration, fluid momentum, and turbulence. From the model results, it is known that suspension of sediment decreases turbulence intensity. It is also found that cohesive sediment has a relatively weak effect on turbulence damping compared to noncohesive sediment. The low settling velocity and more suspension of cohesive sediment are considered to be mechanisms of this behavior. Richardson number determined with results of this study quantitatively shows that cohesive sediment causes less stable density stratification condition and, as a result, the turbulence structure is less damped compared to the case of noncohesive sediment.