• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.1
• /
• pp.57-63
• /
• 2004

A comparative analysis of characteristics of domestic and foreign reconstituted tobacco based on papermaking was conducted to evaluate the quality of reconstituted tobacco and to utilize as basic data for improvement of domestic reconstituted tobacco. In the formation, which is key factor to quality and physical properties of product, foreign reconstituted tobacco has better uniform formation than those of domestic one. These result was attributed to distribution of large floc size in the domestic one unevenly. In the fiber morphology, domestic reconstituted tobacco has larger average fiber length and width than those of foreign one. They indicated that fiber morphology of domestic one will exert structural properties of paper such as formation and permeability. Tensile strength of domestic one has lower than those of foreign one by basis weight. In the air permeability, domestic one was remarkably reduced because base web was over sized. It also will affect the combustibility of reconstituted tobacco. In summary, we conclude that the physical and structural properties of domestic reconstituted tobacco result in quality deviations compared with foreign reconstituted tobacco.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.267-274
• /
• 2004

The optimum condition is defined as one that best suits the purpose of flocculation; the number of small particles should decrease, while that of large particles should increase. The object of this research was to develop a new impeller and substitute for conventional flocculators. The flow characteristics of turbines and hydrofoil type flocculators in turbulent fluids were observed using a standard k-$\epsilon$ Model and a computational fluid dynamics (CFD) simulation program- FLUENT The experiments were performed to compare PBT(Pitched Blade Turbine) flocculator with twisted hydrofoil type flocculators for velocity distribution, and floc formation at conventional water treatment plants in Korea. As a result of the CFD solution, twisted hydrofoil types are similar to hydrofoil flocculators for flow characteristics without regard to the twisted angle, On the other hand, it was established that turbine flocculators are greater than hydrofoil flocculators with flow unevenness and dead zone formation. Twisted hydrofoil type- II (Angle $15{\~}20^{\circ}$) is the most proper impeller for water flocculation from this point of view with a decreasing the dead zone, maintaining of the equivalent energy distribution and a drawing up of the sedimentation substance from the bottom of the flocculation basin.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.246-246
• /
• 2019

점착성 유사는 비점착성 유사보다 작은 입자 크기를 가지며 전자기적 점착력에 의해 연속적인 응집과 파괴의 과정인 응집현상을 겪는다. 응집현상에 의해 생긴 유사 덩어리를 플럭(Floc)이라고 하며 유사의 응집현상은 점착성 유사가 가지는 입자 크기, 침강속도, 밀도를 변화시킨다. 유사의 이동은 크기, 침강속도, 밀도에 영향을 받는다. 따라서 점착성 유사의 여러 특성에 관여하는 입자의 크기에 대한 충분한 이해는 점착성 유사의 이동을 파악하는 데에 필수적이다. 본 연구에서는 점착성 유사의 여러 특성 중, 입자 크기 분포에 대한 특성을 분석하는 것을 수행하였다. 일반적으로 점착성 유사의 연구에서 입도 분포는 Log-normal 분포로 가정하여 사용되고 있다. 그러나 그 적합성에 대해서는 검증된 바가 없다. 따라서 과거 연구에서 조사된 점착성 유사의 입도 분포 자료를 현장에서 측정된 자료와 실험실에서 측정된 자료로 나누어 수집한 후, 표본에 통계학적인 방법인 적합도 검정을 사용하여 실제 어떠한 분포를 모사하는지 살펴보았다. 적합도 검정은 Kolmogorov- Smirnov (K-S)검정을 이용하였으며 K-S 검정의 결과가 유의수준 5%를 통과하는 경우 가정된 분포가 실제 표본을 잘 모사하는 것으로 판단하였다. 적합도 검정 결과, 점착성 유사의 입도 분포는 현장 실험과 실험실 실험에서 다른 특징을 나타내었다. 현장 실험의 경우 입도 분포의 형태가 지수 분포의 형태를 나타내는 경우가 많았으며 Gamma 분포가 우수하게 모사하였다. 실험실 실험의 입도 분포는 일반적인 양의 왜곡도를 가지는 분포를 그렸으며 GEV 분포와 Gamma 분포가 우수하게 모사하였다. 두 경우 모두 Log-normal 분포가 적합하다고 판단되는 경우는 많지 않았다. 그러나 Log-normal 분포에 위치 매개변수를 추가하여 3 매개변수의 분포로 모사한 경우 유의수준 5%를 통과하는 경우가 크게 증가하였다. 향후에는 점착성 유사의 입도 분포를 모사하고 사용함에 있어 Log-normal 분포를 무조건적으로 이용하는 것은 지양해야할 것으로 판단된다. 2 매개변수의 분포를 점착성 유사의 입도분포로 사용할 경우, Gamma 분포를 추천하며, 기존에 사용되던 Log-normal 분포를 사용할 경우 위치 매개변수를 추가하여 3 매개변수의 Log-normal 분포를 이용할 것을 추천한다. 또한 점착성 유사의 입도를 모사하는 분포를 개발하여 사용한다면 점착성 유사의 이동과 특성을 연구할 때 가장 중요한 크기 특성에 대한 많은 정보를 제공할 수 있다고 판단된다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.2
• /
• pp.101-109
• /
• 2004

In this study, the solid-liquid separation characteristics of swine wastewater were investigated for the coagulation and dissolved air flotation (DAF). Coagulation characteristics were studied using jar-tester with the different coagulants and dosage amounts. DAF characteristics were also investigated in terms of the different flotation conditions with the raw swine wastewater, pH adjustment only, and adding coagulants. When the raw swine wastewater was coagulated with the only inorganic coagulants, the proper inorganic coagulants were founded as $FeCl_3$ > PAC > Alum orderly, and the optimal coagulant dosages were founded as $1,000mg/{\ell}$, $1,500mg/{\ell}$, $1,500mg/{\ell}$, respectively. As the raw swine wastewater was treated with the polymer coagulants, the only cationic polymer coagulant showed an effective coagulation and the optimal dosage of cationic coagulant was founded as $200mg/{\ell}$. When the different dosages of cationic polymer was added to each $500mg/{\ell}$ of the inorganic coagulants, the proper inorganic coagulants were founded as $FeCl_3$ > Alum > PAC orderly, and optimal cationic polymer dosages was founded as $25mg/{\ell}$, $25mg/{\ell}$, and $100mg/{\ell}$, respectively. Resulting from the raw swine wastewater experiments using DAF without coagulation, the proper operation conditions of DAF were set to 400% of recycling ratio, 4 atm in air dissolving tank, and under pH 3. But the raw swine wastewater was difficult to successfully operate DAF without pre-coagulation. While the DAF separation after pre-coagulation using inorganic coagulants was not accomplished due to the low intensity of the floc, DAF after pre-coagulation using both the inorganic and cationic polymer coagulants was accomplished very well. Optimal dosage of cationic polymer coagulant in case of $500mg/{\ell}$ Alum dosage was founded as $500mg/{\ell}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.834-846
• /
• 2011

The objective of this study is to development of IDFIS system, that are consisted of hydrocyclone, rapid flocculation and inclined settler with chitosan coagulant. As the results of Jar test, a chitosan optimum dosage of 40 mg/L for river sediment, and 5 mg/L for tunnelling wastewater sediment, which these conditions leaves of residual turbidity of less than 5 NTU. Because of the effectiveness of chitosan in removing turbidity was independent on pH, the operation of IDFIS system would be simple. The synthesized turbidity was made with clay particles, river sediment, river suspended sediment, and tunnelling wastewater sediment. Results indicate that the mean overall removal efficiency of turbidity, SS, COD and TP were 98%, 99%, 85% and 95%, respectively. Chitosan is very efficient in removing turbidity in the entire turbidity range examined. IDFIS system would have possibility with compact design, because of the increase of floc size favours the floc settling speed and reduces the settling time.

• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.40-45
• /
• 2005

Sedimentation is one of the most common and important units in conventional water treatment plant. Structure such as various baffle walls and inclined plate settler may be obstacles to the horizontal flow when it is poorly designed. Therefore, the effects of these structures on characteristics of hydraulic flow must be evaluated to improve the settling efficiency of the floc. The hydraulic characteristic of the two sedimentations at Y water treatment plant (YWTP), which have different deflector baffles inside the settling basin, were investigated by tracer (fluoride) test. The inclined plate settler installed inside settling basin caused an undesirable impact on horizontal flow and produced dead zone. Solid baffle wall under the plate settler could help to minimize the formation of density currents and flow short circuiting. NaF used as a tracer was recovered more than 90% at investigated all basins. Morill index ($t_{90}/t_{10}$), Modal index ($t_p/T-HRT$) and short-circuiting index ($[M-HRT-t_p]/M-HRT$) were determined from tracer test results performed at YWTP. Those indices ranged 2.95~3.02, 0.40~0.53 and 0.32~0.46, respectively.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.59-68
• /
• 1997

The main purpose of this study was to determine effects of BS-SBR compared with SBR on the removal of soluble organics and sludge separation. In the BS-SBR process, soluble organics were removed by suspended activated sludge as well as biological fixed films and these two processes occurred simultaneously in one tank. The removal efficiency of soluble COD in the BS-SBR, approximately 97% in both 1 and 3-cycle/d was higher than for SBR. The BS-SBR process was very efficient for SS removal. The averaged SS concentration were 4.8 mg/l over the operation period, the daily SS values were consistently below 10 mg/l in both of 1-cycle and 3-cycle a day. The sludge settling characteristics in BS-SBR were totally different from SBR's. The sludge, dark brown, was well flocculated and its floc size was visible larger than the SBR's.

• Membrane Journal
• /
• v.15 no.4
• /
• pp.289-296
• /
• 2005

In the MBR process, the membrane fouling occurs seriously on the membrane surface. In general, the membrane fouling is attributed to factors such as deposition or adhesion of sludge floc. The occurrence of fouling is a main cause of a decrease in membrane module fluk. At this study, our MBR membrane is manufactured by nano-particle with excellent anti-fouling character. The fine nano-material which can repel the sludge Hoc from the membrane surface is distributed in the membrane surface. We confirm anti-fouling effect, test continuously in the pilot site.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.181-181
• /
• 2020

점착성 유사는 유사가 가지는 점착력에 의해 응집현상을 겪으며 그 크기와 밀도가 변화한다. 유사의 크기와 밀도는 침강속도에 직접적인 영향을 주며 침강속도으 변화는 유사의 거동에 매우 중요한 작용을 한다. 따라서 점착성 유사의 크기 특성을 파악하는 것은 매우 중요하다. 이전의 많은 연구는 점착성 유사의 입도분포가 대수정규분포를 따른다고 주장하고 있다. 그러나 그 가정이 합리적인지에 대해 분석한 연구는 많지 않다. 본 연구는 통계학적 방법 중 적합도 검정을 이용하여 실제 점착성 유사가 어떠한 분포를 모사하는지 분석하였다. 사용된 적합도 검정 방법은 Kolmogorov-Sminorv(K-S) 검정이며 적합도 판정의 기준은 유의수준 5%를 기준으로 하였다. 그 결과, 실험실 실험에서 측정된 플럭의 입도분포와 현장 실험에서 측정된 입도분포는 다른 결과를 보였다. 현장 실험의 경우, 분포가 오른쪽으로 왜곡된 지수분포의 형태를 나타냈으며, Gamma 분포가 가장 우수하게 모사하였다. 실험실 실험의 경우 일반적인 양의 왜도를 가지는 분포를 나타냈으며 GEV분포가 점착성 유사의 입도분포를 가장 잘 모사하였다. 대수정규 분포의 경우 일반적으로 이용하는 2-매개변수 대수정규분포일 경우 현장실험과 실험실 실험 모두 적합하지 않았다. 그러나 위치 매개변수를 추가하여 3-매개변수 대수정규분포를 사용하면 점착성 유사의 입도분포를 잘 모사하는 것으로 판단된다. 따라서 점착성 유사의 입도분포를 무조건적으로 대수정규분포로 사용하는 것은 지양해야할 것으로 판단된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1139-1145
• /
• 2008

The objectives of this research are to investigate the mechanism of coagulation affecting UF and find out the optimum conditions of the combined of coagulation with UF membrane filtration for NOM removal. During the mixing period, substantial changes in particle size distribution occurred under rapid and slow mixing condition due to the simultaneous formation of microflocs and NOM precipitates. Therefore, combined pretreatment using coagulation (both rapid mixing and slow mixing) improved dissolved removal efficiency. Also, for combined coagulation to membrane process, flux reduction rate showed lower than only UF process. The rate of flux decline for the hydrophobic membrane was considerably greater than for the hydrophilic membrane. Applying coagulation process before membrane filtration showed not only reducing membrane fouling, but also improving the removal of dissolved organic materials that might otherwise not be removed by the membrane.