• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.244-258
• /
• 2015

The horizontal stability of a Single-Point Moored (SPM) Floating Liquefied Natural Gas (FLNG) facility is investigated. Both numerical and experimental studies have been conducted for this SPM FLNG. The numerical simulations feature well the experimental data. The effects of the turret locations are studied based on the validated numerical model. Statistic results of the vessel's motions with different turret locations are conducted and compared. The results show that the longitudinal location of the turret has a significant influence on the horizontal stability, which has a strong relationship with the yaw and roll motions. The calculated top tensions on the hawsers also develop a regular change as changing the turret's location. The investigation will provide a brief of principles with more details for the design of the ongoing project.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.1
• /
• pp.114-125
• /
• 2017

This paper addresses a study of inner-tank sloshing effect on motion responses of a Floating Liquefied Natural Gas (FLNG) system, through experimental analysis and numerical modeling. To investigate hydrodynamic characteristics of FLNG under the conditions of with and without LNG-tank sloshing, a series of numerical simulations were carried out using potential flow solver SESAM. To validate the numerical simulations, model tests on the FLNG system was conducted in both liquid and solid ballast conditions with 75% tank filling level in height. Good correlations were observed between the measured and predicted results, proving the feasibility of the numerical modeling technique. On the verified numerical model, Response Amplitude Operators (RAOs) of the FLNG with 25% and 50% tank filling levels were calculated in six degrees of freedom. The influence of tank sloshing with varying tank filling levels on the RAOs has been presented and analyzed. The results showed that LNG-tank sloshing has a noticeable impact on the roll motion response of the FLNG and a moderate tank filling level is less helpful in reducing the roll motion response.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.81-92
• /
• 1997

Rear floating junction cell (RFJC), using the buried contact technology, is capable of eliminating the efficiency limitations on the single sided cells by providing betterear surface passivation. The implementation of this structure, is simpler and lower in cost and therefore viable for commercial production. However, the contributions, due to damages in the two sets of grooves, to the total dark saturation current density has limited the achievable efficiency of the RFJC to only 21.5 %. This Paper reports on the efficiency estimates of RFJC using PC-1D.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3635-3642
• /
• 2021

Natural circulation systems (NCSs) are extensively applied in nuclear power plants because of their simplicity and inherent safety features. For some passive natural circulation systems in floating nuclear power plants (FNPPs), the ocean is commonly used as the heat sink. Condensation induced water hammer (CIWH) events may appear as the steam directly contacts the subcooled seawater, which seriously threatens the safe operation and integrity of the NCSs. Nevertheless, the research on the formation mechanisms of CIWH is insufficient, especially in NCSs. In this paper, the characteristics of flow rate and fluid temperature are emphatically analyzed. Then the formation types of CIWH are identified by visualization method. The experimental results reveal that due to the different size and formation periods of steam slugs, the flow rate presents continuous and irregular oscillation. The fluid in the horizontal hot pipe section near the water tank is always subcooled due to the reverse flow phenomenon. Moreover, the transition from stratified flow to slug flow can cause CIWH and enhance flow instability. Three types of formation mechanisms of CIWH, including the Kelvin-Helmholtz instability, the interaction of solitary wave and interface wave, and the pressure wave induced by CIWH, are obtained by identifying 67 CIWH events.

• Journal of Hydrogen and New Energy
• /
• v.22 no.4
• /
• pp.552-558
• /
• 2011

A 50 kW class rotating body type wave energy converter consisted of two floating bodies and a PTO (Power Takeoff) unit is studied. As an wave energy extractor, the body is designed to have a VLCO (Variable Liquid-Column Oscillator) having a liquid filled U-tube with air chambers. Owing to the oscillation of the liquid in the U-tube caused by the air spring effect of the air chambers, the amplitude of response of the VLCO becomes significantly amplified for a target wave period. The PTO converts the rotational moment introduced from the relative motion of the hinged bodies to an hydraulic power by means of a cylinder. A high pressure accumulator, hydraulic motor and a generator are equipped in the PTO to convert the hydraulic power to electric power. A control law for adjusting the oscillation period of the VLCO is proposed for the efficient operation of the VLCO with various wave conditions. It is found that the effect of the air spring has an important role to play in making the oscillation of the VLCO match with the ocean wave. In this way, the wave energy converter equipped with the VLCO provides the most effective mode for extracting energy from the ocean wave.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1738-1748
• /
• 2019

Previous research has shown that the inclined condition has an impact on the natural circulation (natural circulation) mode operation of Floating Nuclear Power Plant (FNPP) mounted on the movable marine platform. Due to its compact structure, small volume, strong maneuverability, the Integral Pressurized Water Reactor (IPWR) is adopted as marine reactor in general. The OTSGs of IPWR are symmetrically arranged in the annular region between the reactor vessel and core support barrel in this paper. Therefore, many parallel natural circulation loops are built between the core and the OTSGs primary side when the main pump is stopped. and the inclined condition would lead to discrepancies of the natural circulation drive head among the OTSGs in different locations. In addition, the flow rate and temperature nonuniform distribution of the core caused by inclined condition are coupled with the thermal hydraulics parameters maldistribution caused by OTSG group operating mode on low power operation. By means of the RELAP5 codes were modified by adding module calculating the effect of inclined, heaving and rolling condition, the simulation model of IPWR in inclined condition was built. Using the models developed, the influences on natural circulation operation by inclined angle and OTSG position, the transitions between forced circulation (forced circulation) and natural circulation and the effect on natural circulation operation by different OTSG grouping situations in inclined condition were analyzed. It was observed that a larger inclined angle results the temperature of the core outlet is too high and the OTSG superheat steam is insufficient in natural circulation mode operation. In general, the inclined angle is smaller unless the hull is destroyed seriously or the platform overturn in the ocean. In consequence, the results indicated that the IPWR in the movable marine platform in natural circulation mode operation is safety. Selecting an appropriate average temperature setting value or operating the uplifted OTSG group individually is able to reduce the influence on natural circulation flow of IPWR by inclined condition.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.15-24
• /
• 2009

The results of a simulation study of variable liquid column oscillations in U-tanks with a novel control scheme are presented. The configuration under investigation is analogous to that of the tuned liquid-column damper used to suppress oscillatory motion in large structures like tall buildings and cargo ships. However, by virtue of an adequate controller, the response of amplitude of the U-tanks becomes larger in a desired frequency range. The motion of wave energy conversion system equipped with a variable liquid column oscillator is described by a series of nonlinear differential equations. The equations describe the motion of body under ocean wave excitation, and the motion of liquid with an air-spring effect caused by the compression and expansion of air in vertical liquid columns and air chambers. It is shown that the effect of the air-spring has a vital role to maintain the natural frequency of oscillation in the system to synchronize with the frequency of the ocean wave, thus the system provides the most effective mode for energy extraction from the ocean.

• Ocean Systems Engineering
• /
• v.6 no.4
• /
• pp.305-324
• /
• 2016

Wave load prediction at zero forward speed using finite depth Green function is a well-established method regularly used in the offshore and marine industry. The forward speed approximation in deep water condition, although with limitations, is also found to be quite useful for engineering applications. However, analysis of vessels with forward speed in finite water depth still requires efficient computing methods. In this paper, a method for analysis of wave induced forces and corresponding motion on freely floating three-dimensional bodies with low to moderate forward speed is presented. A finite depth Green function is developed and incorporated in a 3D frequency domain potential flow based tool to allow consideration of finite (or shallow) water depth conditions. First order forces and moments and mean second order forces and moments in six degree of freedom are obtained. The effect of hull flare angle in predicting added resistance is incorporated. This implementation provides the unique capability of predicting added resistance in finite water depth with flare angle effect using a Green function approach. The results are validated using a half immersed sphere and S-175 ship. Finally, the effect of finite depth on a tanker with forward speed is presented.

• Biomedical Science Letters
• /
• v.8 no.2
• /
• pp.101-106
• /
• 2002

The purpose of this study was to test the capacity of automatic tablet crusher. The Automatic tablet crusher not only saved crushing time, but also removed floating fine powders that was occurred during crushing and caused allergy. The characteristics of powder produced by this crusher were as follows: First, to meet the condition as powder after pulverizing 5∼10 g tablet it took 6 to 12 seconds crushing time. But six seconds would do to get powder f3r oral administration. Second, when the quantity of medicine was measured by HPLC, powder from automatic crusher showed higher than that from pestle. HPLC chromatogram indicated that there was no change of medicine in the process of pulverization.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.spc
• /
• pp.103-112
• /
• 2010

Pellets, which are multiple-unit dosage systems, have the several therapeutic advantages over single-unit dosage systems in oral drug delivery. This review focuses on the current status and explores extrusion-spheronization technique with special attention to controlled-release application of pellets including coated pellets for delayed release formulations, coated pellets for colon delivery, coated pellets for sustained drug delivery, sustained-release matrix pellets, pellets compressed into tablets, bioadhesive pellets, floating pellets, and pelletization with solubilization techniques.