• Journal of Aerospace System Engineering
• /
• v.14 no.2
• /
• pp.12-19
• /
• 2020

In Korea, the regulation is MOLIT Notice 2018-290, Guidance for Approval of Synthetic Flight Trainer as Flight Simulator and Flight Training Device. The FAA (Federal Aviation Administration) categorizes FSTD (Flight Simulation Training Device) into FFS (Full Flight Simulator) and FTD (Flight Training Device), according to its level. Additional categories for regulation are airplane and helicopter, depending on the type of aircraft. In this study, the objective tests for the handling quality of the FAA and Korean regulations were compared and analyzed. In QPS (Qualification Performance Standard), related test titles, flight conditions, and tolerance limits were analyzed for the handling quality. Based on this study, recommendations on amendments to the regulation was presented.

• Journal of Aerospace System Engineering
• /
• v.5 no.1
• /
• pp.36-40
• /
• 2011

In this report US and Korea civil and military simulator certification system is researched, and a plan for improvement is proposed. Korean simulator certification system should adopt FAA's system and improve upon it. Certification criteria should have a basis on FAA certification criteria and add military operation characteristics selectively. Flight test data, used as comparison criteria in certification, should be acquired in package during aircraft development or overseas acquisition. The establishment of certification system is expected to improve external credibility and improve competitiveness in overseas market.

• IE interfaces
• /
• v.20 no.1
• /
• pp.41-48
• /
• 2007

The main purpose of this paper is cost reduction in absurd pilot positive expense and human accident prevention which is caused by in the pilot selection process. We use classification models such as logistic regression, decision tree, and neural network based on aptitude test results of 505 ROK Air Force applicants in 2001~2004. First, we determine the reliability and propriety against the aptitude test system which has been improved. Based on this conference flight simulator test item was compared to the new aptitude test item in order to make additional yes or no decision from different models in terms of classification accuracy, ROC and Response Threshold side. Decision tree was selected as the most efficient for each sequential flight training result and the last flight training results predict excellent. Therefore, we propose that the standard of pilot selection be adopted by the decision tree and it presents in the aptitude test item which is new a conference flight simulator test.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2008

The objective of the KA-32 Helicopter Training Simulator Development Program, executed by the Republic of Korea Government, is to acquire a helicopter simulator which meets level C requirements in accordance with the FAA AC 120-63. The Korea Aerospace Research Institute (KARI) manages the development program and is supposed to develop and validate the flight dynamics model based on simulator design data and flight test data. The helicopter chosen for this project is the Kamov KA32T, operated by the Korean Forest Aviation Office. This paper presents the test program and information about the installation and execution of the flight tests. The program consist of tests for the simulator qualification, additional tests for model data and additional tests for model validation. The flight trials were performed from 30 July to 31 August at the Iksan airbase of the Forest Aviation Office (FAO).

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.824-836
• /
• 2008

Relaxed static stability(RSS) concept has been applied to improve aerodynamic performance of modern version supersonic jet fighter aircraft. Therefore, flight control systems are necessary to stabilize an unstable aircraft, and provides adequate handling qualities and achieve performance enhancements. Standard FCSDVP (Flight Control System Design and Verification Process) is provided to reduce development period of the flight control system. In addition, if this process is employed in developing flight control system, it reduces the trial and error for development and verification of flight control system. This paper addresses the flight control system design and verification process for the RSS aircraft utilizing design goal based on military specifications, linear and nonlinear system design and verification based on universal software, handling quality test based on HILS(Hardware In-the-Loop Simulator) environment, and ground and flight test results to verify aircraft dynamic flight responses.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.405-413
• /
• 2011

Defense Systems Test Center in ADD supports increasingly various missile test requirements such as higher altitude event, multi target operation and low-altitude, high velocity target tracking. In this paper, we have proposed the development of instrumentation radar tracking status simulator based on virtual reality. This simulator can predict the tracking status and risk of failure using several modeling algorithms. It consists of target model, radar model, environment model and several algorithms includes the multipath interference effects. Simulation results show that the predict tracking status and signal are similar to the test results of the live flight test. This simulator predicts and analyze all of the status and critical parameters such as the optimal site location, servo response, optimal flight trajectory, LOS(Line of Sight). This simulator provides the mission plan with a powerful M&S tool to rehearse and analyze instrumentation tracking radar measurement plan for live flight test at DSTC(Defense Systems Test Center).

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2010

For many years the development and verification of on-board flight software have been essentially performed on STB (Software Test Bed) environments which consist of real hardware in KARI. During development of on-board flight software on STB, we experienced many difficulties such as the late delivery of target hardware and limitation to access STB simultaneously by multiple developers. And it takes too much time and cost to build up multiple STBs. In order to successfully resolve this kind of problems, the software-based spacecraft simulator has been developed. The simulator emulates the on-board computer, I/O modules and power controller units and it supports the debugging and test facilities to software engineers for developing flight software. Also the flight software can be loaded without any modification and can be executed as pseudo real-time. This paper presents the architecture and design of software-based spacecraft simulator, and flight software development and verification under this environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.706-710
• /
• 2003

In this paper, we will present brief design feature, implementations, and tests for verification of KOMPSAT-2 simulator, which is a subsystem of KOMPSAT-2 MCE. SIM is implemented on PC server to minimize costs and troubles on embedding onboard flight software into SIM, OOA/OOD methodology is employed to maximized S/W reusability, and XML is used for S/C characteristics, TC, TM and Simulation data instead of commercial DB. Consequently, we can reduce costs for the system, efforts embedding flight software, and maximize software reusability. SIM subsystem test was performed successfully.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.1
• /
• pp.97-105
• /
• 1997

An aircraft simulator for ergonomics testing and pilot training was developed from the joint work Agency for Defense Development(ADD) and Daewoo Heavy Industry, LTD, in Korea at first time. It is basically to satisfy the requirements established by FAA-AC-120-40C ( 1995-JAN-26). The aircraft simulator will be used mainly for ergonomics testing and pilot training for basic trainer on ADD and Korea Air Force in near futrue. This simulator reproduces faithfully the cockpit and flight characteristics of the KTX-1 aircraft. It is one of the latest full flight simulators that have the CGI(computer graphic image) visual system and six degree of freedom motions system. Development efforts focused on user-oriented design approach for ergonomics testing and flight training of pilots. Main characteristics of each subsystem are described such as cockpit, instruments, control loading system, motion system, visual system, aural system, instructor operation station and aircraft simulation softwear.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.80-86
• /
• 2012

The software-based satellite simulator has been developed from the start of the project to resolve the restriction and limitation of using hardware-based software development platform. It enables the development of flight software to be performed continuously since initial phase. The satellite simulator emulates the on-board computer, I/O modules, electronics and payloads, and it can be easily adapted and changed on hardware configuration change. It supports the debugging and test facilities for software engineers to develop flight software. Also the flight software can be loaded without any modification and can be executed as faster than real-time. This paper presents the architecture and design of software-based GEO satellite simulator which has hot-standby redundancy mechanism, and flight software development and test under this environment.