• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.333-340
• /
• 2015

The contrast (fish body to medium ratio) of density and sound speed were measured to estimate acoustic scattering from small juvenile cod (Gadus macrocephalus) with the Kirchhoff-Ray Mode backscatter model. The density contrast was measured by the density-bottle method and the sound speed contrast was estimated by the time of flight method. The results revealed that the measured density contrasts of juvenile cod varied between 1.003 and 1.029 (mean = 1.014, S.D. = 0.01). On the other hand, sound speed contrasts varied between 1.039 and 1.041 (mean = 1.041, S.D. = 0.001). The relationship between averaged target strength (TS) and total length (TL) established by the model were <$TS_{38kHz}$> = 20log(TL) - 68.8 and <$TS_{38kHz}$> = 20log(TL) - 69.4, respectively.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.28-34
• /
• 2015

An analysis method of trajectory prediction has been suggested and the developed trajectory prediction module, which is an important functional component of the Arrival Manager (AMAN) of Jeju airport, has been tested by applying the suggested method. The objective of this method is to improve prediction performance of the trajectory prediction module. The trajectory prediction module predicts the trajectories based on the real-time track data and flight plans. Therefore, the suggested analysis method includes the simulation framework which is based on real-time playback, recording, and graphic display systems for testing. Besides, the definition of time error, which is a important index for the time based scheduling system, such as AMAN, is included in the suggested analysis method. An example of arrival time prediction accuracy improvement through the suggested analysis method has also been presented.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.35-42
• /
• 2021

The purpose of this paper is to review the small unmanned aerial system (sUAS) safety policy promoted by the United States(US) government. Therefore, in this paper, along with sUAS risk factors, the risk factors of sUAS that the US government is interested in are described. In addition, the risk factors were classified into physical and non-physical factors, and provisions mentioned in the Federal Aviation Administration(FAA) Relicensing Act were reviewed. Other risk scenarios were analyzed focusing on target scenario items that the FAA is interested in, such as flight operation disruption, infrastructure damage, and facility trespassing. Of course, we looked at the risk management principles promoted by the US FAA. In this paper, as a research method, the direction and contents of the FAA's sUAS policy were studied and reviewed from the analysis of major foreign journals and policy. In the research result of this paper, by analyzing the FAA sUAS safety risk management policy, the integrated operation and safety policy, physical risk management policy, operation and safety regulation, and sUAS policy and technology direction necessary for establishing the sUAS safety risk management guide in Korea are presented. The contribution of this study is to identify the leading US sUAS safety policy direction, and it can be used as basic data for deriving future domestic policy directions from this. Based on the research results presented in the future, policy studies are needed to derive detailed implementation plans.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.315-343
• /
• 2018

In the event of an air accident, the media and members of the general public pay attention to the victim of the accident and are deeply concerned about their actions and rewards. However, through the accident of Air China(CCA) Flight 129, which occurred in 2002, we were able to confirm that it is a real problem that the victims of the air accident as well as the victims suffer much suffering and serious aftermath. Nevertheless, Korea's system for assistance the families of victims of air accident is very poor. On the other hand, when Trans-World Airlines(TWA) Flight 800 exploded and crashed over the Atlantic Ocean in 1996, the United States enacted a law to assistance the families of the victims of the accident. According to this law, systematic assistance and management of not only the victims of the accident but also their families, minimize the additional damage of victims and victims' families and help them to get rid of the accident after the accident. In particular, the measures taken by the US authorities in response to an accident in which an Asiana Airlines flight(AAR) 214 crashed during a landing at San Francisco International Airport in 2013, made a lot of suggestions for us to assistance the victims and their families in an air accident. The purpose of this paper is to suggest the necessity of improving the system for victims and victim's family assistance in air accident. In this paper, we analyze the domestic and foreign legal systems and related cases in past accidents, identify the deficiencies of the Korean system, and derive the necessity to improve the related system. It is also important to make sure that victims' families are relieved from early psychological and economic shocks and that the results of accident investigations are reliable. Relevant ministries, airlines, and related agencies should recognize that prompt and systematic assistance and cooperation is needed to ensure that victims and families are relieved of the impact and confidence in the investigation, as is the case in the United States. In addition, efforts should be made to supplement the related laws for the assistance of aircraft victims and victims' families, to establish manuals for implementation, to plan and to implement them promptly in the event of an accident. To achieve this, it is necessary to establish regulations for the legal institutionalization of the roles and responsibilities of national and state agencies on victims of aviation accidents and family assistance. And the victim and family assistance plan that the airline has to submit to it, as specified in the current law, need to specify that item. In addition, new and supplemented contents should be integrated into a single clause or proposed as a separate special law for the purpose of applying a clear law.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.780-786
• /
• 2005

This study presents a non-video, non-invasive, automatic, on-site monitoring system the system employs ultrasonic transducers to detect behavior in sows before, during and after parturition. An ultrasonic transmitting/receiving (T/R) circuit of 40 kHz was mounted above a conventional parturition bed. The T/R units use ultrasonic time-of-flight (TOF) ranging technology to measure the height of the confined sows at eight predetermined locations. From this data, three momentary postures of the sow are determined, characterized as standing-posture (SP), lateral-lying-posture (LLP) and sitting posture (STP). By examining the frequencies of position switch Stand-Up-Sequence (SUS) between standing-posture (SP), lateral-lying-posture (LLP) and sitting-posture (STP) rate can be determined for the duration of the sow' confinement. Three experimental pureblooded Landrace sows undergoing normal gestation were monitored for the duration of confinement. In agreement with common observation, the sows exhibited increased restlessness as parturition approached. Analysis of the data collected in our study showed a distinct peak in Stand-Up-Sequence (SUS, i.e. the transition from lying laterally to standing up ) and sitting-posture (STP) rate approximately 12 h prior to parturition, the observed peak being 5 to 10 times higher than observed on any other measurement day. It is concluded that the presented methodology is a robust, low-cost, lowlabor method for the continuous remote monitoring of sows and similar large animals for parturition and other behavior. It is suggested that the system could be applied to automatic prediction of sow parturition, with automatic notification of remote management personnel so human attendance at birth could reduce rates of sow and piglet mortality. The results of this study provide a good basis for enhancing automation and reducing costs in large-scale sow husbandry and have applications in the testing of various large mammals for the effects of medications, diets, genetic modifications and environmental factors.

• Journal of Industrial Convergence
• /
• v.18 no.1
• /
• pp.79-85
• /
• 2020

Recently, the RPAS(Remote Piloted Aircraft System), by remote control and autonomous navigation, has been increasing in interest and utilization in various industries and public organizations along with delivery drones, fire drones, ambulances, agricultural drones, and others. The problems of the stability of unmanned drones, which can be self-controlled, are also the biggest challenge to be solved along the development of the drone industry. drones should be able to fly in the specified path the autonomous flight control system sets, and perform automatically an accurate landing at the destination. This study proposes a technique to check arrival by landing point images and control landing at the correct point, compensating for errors in location data of the drone sensors and GPS. Receiving from the Google Map API and learning from the destination video, taking images of the landing point with a drone equipped with a NAVIO2 and Raspberry Pi, camera, sending them to the server, adjusting the location of the drone in line with threshold, Drones can automatically land at the landing point.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1397-1399
• /
• 2003

When and Where, What kind of agricultural products will be produced and provided for the market? It is a commercial requirement, and also an academic questions to remote sensing technology. Crop physiology analysis and growth monitoring are important elements for precision agriculture management. Remote sensing technology supplies us more selections and available spaces in this dynamic change study by producing images of different spatial, spectral and temporal resolutions. Especially, the hyperspectral remote sensing should do play a key role in crop growth investigation at national, regional and global scales. In the past five years, Chinese academy of sciences and Japan NTT-DATA have made great efforts to establish a prototype information service system to dynamically survey the vegetable planting situation in Nagano area of Japan mainly based on remote sensing data. For such concern, a flexible and light-duty flight system and some practical data processing system and some necessary background information should be rationally made together. In addition, some studies are also important, such as quick pre-processing for hyperspectral data, Multi-temporal vegetation index analysis, hyperspectral image classification in support of GIS data, etc. In this paper, several spectral data analysis models and a designed airborne platform are provided and discussed here.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.699-709
• /
• 2023

As the global air traffic volume has shown a rapid increase, doubling every 15 years since 1977, domestic and international air traffic control services and air navigation safety facility operation management system and status review It is necessary to present the feasibility of establishing an air traffic control agency with integrated functions and establish an operating system for an independent dedicated agency to provide advanced air traffic control services in preparation for the future air transport environment. In particular, in 2021, the national ATM reformation and enhancement (NARAE) a customized comprehensive plan for operations, facilities, and systems to handle air traffic safely and efficiently by actively reflecting changes in the navigation environment such as international policies and standards as this is established, the role of the air traffic control agency becomes more important, and an improved action plan for the control and navigation operating system must be promoted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.493-503
• /
• 2021

In this study aviation authority officials were classified into four cultural groups according to culture theory, and then questioned to determine the effects of cultural bias on their social acceptance of a new air traffic flow management system. Based on previous studies, cultural biases were categorized as egalitarianistic, individualistic, fatalistic, and hierarchical, and social acceptances were considered to be influenced by four variables, that is, perceptions of usefulness, work attitude, intention to use, and behavior (job absorption). Empirical analysis showed that hierarchy had a significant positive effect on social acceptance, and egalitarianism was found to have a significant positive effect on social acceptance with 95% credibility. We propose the organizational culture of Korean government be changed to accept the diverse opinions of government officials during the implementation phase of the new system recommended by ICAO.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.977-982
• /
• 2007

There have been many efforts in automatic object recognition using computing technologies. Especially in the development of automated construction equipment, automatic object recognition is very important issue for the proper equipment maneuvering. 3D laser scanning, which uses (time-of-flight) method to construct the 3-dimensional information, is applied to the civil earth work environment for its high accuracy, quick data collection, and object recognition capability that will be developed by the authors in the future. The 3D earth model is also used as a fundamental information for intelligent earth work task planning. This paper presents the analysis of the 3D laser scanner market and selection of the most optimum 3D scanner for the intelligent earth work planning. As well as the hardware configuration for the automated 3D earth modeling is developed but also the software structure and detailed user interface are designed in this research. In addition, it is presented in this paper that the accuracy comparison test between TotalStation(R) which is a traditional survey tool and ScanStation(R). The accuracy test is done by relative distance measurement using known targets.