• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.465-468
• /
• 2011

Ice accretion on aircraft surface can greatly deteriorate the safety of aircraft. In particular, it can be a cause of impediment for aircraft performances such as aerodynamic characteristics, control, and engine. Numerical simulation of icing accretion based on the state-of-art CFD techniques can be alternative to expensive icing wind tunnel test or flight test. In this study, icing conditions are defined in order to predict the ice accretions around the air intake of aircraft. Then the range and amount of ice accretion on the intake in icing wind tunnel were investigated In addition, a study on the size effect of icing wind tunnel was conducted in order to check the compatibility with the real in-flight test environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.367-375
• /
• 2006

In this study, structural vibration analyses of a smart unmanned aerial vehicle (UAV) have been conducted considering dynamic loads generated by rotating rotor and wakes. The present UAV (TR-S5-03) finite element model is constructed as a full three-dimensional configuration with different fuel conditions and tilting angles for helicopter, transition and airplane flight modes. Practical computational procedure for modal transient response analysis (MTRA) is established. using general purpose finite element method (FEM) and computational fluid dynamics (CFD) technique. The dynamic loads generated by rotating blades in the transient and forward flight conditions are calculated by unsteady CFD technique with sliding mesh concept. As the results of present study, transient structural displacements and accelerations are presented in detail. In addition, vibration characteristics of structural parts and installed equipments are investigated for different fuel conditions and tilting angles.

• 한국항공우주학회지
• /
• 제34권3호
• /
• pp.67-73
• /
• 2006

본 논문에서는 매개변수 추종기법과 모델추종 적응제어기법을 이용하여 재형상 모델 추종 비행제어기법을 제안하였다. 기준 모델을 추종하기 위하여 모델의 신호와 입력, 오차를 이용하여 적응제어기를 구성하였다. 고장이 발생하는 경우 시스템에 발생하는 불확실성에 대처하기 위해 시스템 식별기법을 도입하였으며, 역변환 계산의 용이성을 위해 회귀적 재귀 푸리에 변환기법을 사용하였다. 회귀적 재귀 푸리에 변환을 이용한 적응제어기법을 통해 고장에 능동적으로 대처하는 비행제어시스템을 구성하였으며, 항공기 제어면 파손을 모사하기 위하여 안정미계수 및 조종미계수 기법을 이용하여 고장을 정식화 하였다. 수치 시뮬레이션을 통해 제안된 제어시스템의 타당성을 검증하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.18-33
• /
• 2008

This paper presents design optimization of a new Active Twist Rotor (ATR) blade and conducts its aeroelastic analysis in forward flight condition. In order to improve a twist actuation performance, the present ATR blade utilizes a single crystal piezoelectric fiber composite actuator and the blade cross-sectional layout is designed through an optimization procedure. The single crystal piezoelectric fiber composite actuator has excellent piezoelectric strain performance when compared with the previous piezoelectric fiber composites such as Active Fiber Composites (AFC) and Macro Fiber Composites (MFC). Further design optimization gives a cross-sectional layout that maximizes the static twist actuation while satisfying various blade design requirements. After the design optimization is completed successfully, an aeroelastic analysis of the present ATR blade in forward flight is conducted to confirm the efficiency in reducing the vibratory loads at both fixed- and rotating-systems. Numerical simulation shows that the present ATR blade utilizing single crystal piezoelectric fiber composites may reduce the vibratory loads significantly even with much lower input-voltage when compared with that used in the previous ATR blade. However, for an application of the present single crystal piezoelectric actuator to a full scaled rotor blade, several issues exist. Difficulty of manufacturing in a large size and severe brittleness in its material characteristics will need to be examined.

• 한국추진공학회지
• /
• 제9권3호
• /
• pp.1-9
• /
• 2005

고성능 로켓엔진의 터보펌프를 구동하기 위한 연료 과농 가스발생기에서 연소 불안정 발생시, 음향 모드 공진주파수를 모사하는 방법을 통하여 모사배관을 결정하였다. 관심 음향모드의 몇 파장만을 모사하여 실제 연소시험에 바로 적용할 수 있는 팎은 길이의 배관도 제시하였다. 가스발생기에서의 연소 불안정을 제어하기 위한 하나의 방안으로, 모사배관의 길이를 변경하여 분사기의 동특성과 연소실의 공진 음향 모드를 서로 분리시킴으로써 상호작용이 일어나지 않게 할 수 있다. 이러한 특성은 연소시 험을 통해 확인되었고, 이를 통하여 비행용 가스발생기의 연소시험과 연소불안정 제어를 위한 한 가지 방안으로서 모사배관을 결정하는 방법을 확립하였다.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.819-826
• /
• 2011

The proton exchange membrane fuel cell (PEMFC) is regarded as the most promising alternative power sources for unmanned aerial vehicle (UAV) due to its high energy density and silent operation. Since there are many load changes during UAV flight, thermal management is one of the important factor for the performance of PEMFC. In order to reduce the UAV weight for the stable operation of UAV, thermal management system (TMS) studied in this work does not use the fan but use the air flowing into UAV by UAV flight. In order to develop the passive type heat exchanger (HEX) for 1kW PEMFC, four types of HEXs are fabricated and their cooling performances are compared. The parametric study on the cooling performance of HEXs has performed with the variation of operating parameters such as mass flow rates and inlet temperature of air and coolant. Type 4 has the best performance in every case. This study can be helpful to achieve the optimal design of HEX for PEMFC powered UAV.

• 한국추진공학회지
• /
• 제4권3호
• /
• pp.74-82
• /
• 2000

초음속 비행체 및 극음속 성층권 비행체용 추진기관으로의 사용이 검토되고 있는 차세대 추진기관 들을 산화제 공급방식에 따라 공기흡입 엔진, 로켓 엔진 및 복합사이클 엔진으로 분류하여 엔진의 구성방식 및 추진특성들을 기술하였다. 공기흡입 엔진은 저고도에서의 성능이 우수하고 재사용이 가능 하지만 공기 밀도가 낮은 고고도 영역에서의 성능이 좋지 않으며 로켓 엔진은 넓은 고도영역에서 사용이 가능한 반면 낮은 비추력 및 고비용 발사체계 등과 같은 단점들을 가지고 있다. 한편 복합사이클 엔진은 이러한 제약성을 극복할 수 있는 최적의 차세대 추진시스템으로 부상되고 있으며 최근 선진국들은 국가적 개발 프로젝트로 자국의 상황에 적합한 복합사이클 엔진을 개발하는데 주력하고있다. 따라서 복합사이클 엔진은 가까운 장래에 초음속 및 극음속 대기권 비행을 현실화시킬 수 있는 추진시스템으로 각광을 받을 것으로 예상된다.

• 한국항공운항학회지
• /
• 제27권4호
• /
• pp.21-26
• /
• 2019

The purpose of this study is to suggest a method for the efficient preventive maintenance of aircraft gas turbine engine turbine blades. For this study, the types and characteristics of gas turbine engines and its turbine blades were studied, the turbine blade defect types that caused an In-Flight Shut Down(IFSD) were analyzed, the blade failure rate according to the blade life cycle was analyzed through the Weibull distribution, one of the statistical techniques. Through these research results, it is possible to supplement the problems of the life cycle management and maintenance method of the turbine blade, and to suggest the measures to strengthen the preventive maintenance of the turbine blade. In this analysis, when total cycle of turbine blade exceeds 18,000 cycles, the failure rate is over 98%, and then the special management measures are required.

• Journal of Multimedia Information System
• /
• 제5권2호
• /
• pp.121-130
• /
• 2018

We developed multimedia esophageal catheters for use with birds to measure and record ECG and angular velocity while anesthesized, at rest, and in flight. These catheters enable estimates of blood pressure based on readings given by an angular velocity sensor and by RR intervals of ECG affected by EMG. In our experiments, the catheters had the following characteristics: 1. Esophageal catheters offer a topological advantage with 8-dB SNR improvement due to elimination of electromyography (EMG). 2. We observed a very strong correlation between blood pressure and the angular velocity of esophageal catheter axial rotation. 3. The impulse conduction pathway (Purkinje fibers) of the cardiac ventricle has a direction opposite to that of the mammalian pathway. 4. Sympathetic nerves predominate in flight, and RR interval variations are strongly suppressed. The electrophysiological data obtained by this study provided especially the state of the avian autonomic nervous system activity, so we can suspect individual's health condition. If the change of the RR interval was small, we can perform an isolation or screening from the group that prevent the pandemics of avian influenza. This catheter shall be useful to analysis an avian autonomic system, to perform a screening, and to make a positive policy against the massive infected avian influenza.

• Bulletin of the Korean Chemical Society
• /
• 제19권8호
• /
• pp.830-835
• /
• 1998

The characteristics of the ablation plume generated by 532 nm Nd: YAG laser irradiation of a Pb(Zr0.52Ti0.48)O3 (PZT) target have been investigated using a pulsed-field time-of-flight mass spectrometer (TOFMS). The relative abundance of O+, Ti+, Zr+, Pb+, TiO+, and ZrO+ ions has been measured and discussed. TiO+ and ZrO+ ions were also found to be particularly stable within the laser ablation plasma with respect to PbO+ species. The behavior of the temporal distributions of each ionic species was studied as a function of the delay time between the laser shot and the ion extraction pulse. The most probable velocity of each ablated ion is estimated to be Vmp=1.1-1.6x 105 cm/s at a laser fluence of 1.2 J/cm2, which is typically employed for the thin film deposition of PZT. The TOF distribution of Ti+ and Zr+ ions shows a trimodal distribution with one fast and two slow velocity components. The fast velocity component (6.8x 10' cm/s) appears to consist of directly ablated species via nonthermal process. The second component, originated from the thermal evaporation process, has a characteristic velocity of 1.4-1.6 x 105 cm/s. The slowest component (1.2 x 105 cm/s) is composed of a dissociation product formed from the corresponding oxide ion.