• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.390-396
• /
• 2015

This paper proposes a method to reduce flicker when running an AC-power direct-drive type multiple string LED driver IC. The proposed method greatly decreases flicker using one capacitor and P-type MOSFET transistor (PMOS). The flicker index (FI) was reduced by over 40% through experiments, and less than half of the conventional external components are used in the passive valley fill circuit, which gives an advantage in the cost and utilization in the design of LED lighting modules. The 0.35 um 700 V BCD process was used to manufacture this LED driver.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2017-2020
• /
• 2011

Flicker, which is also known as voltage fluctuation, is an electromagnetic phenomenon generated by large scale nonlinear loads, such as arc furnaces and welding machines. Since a severe and continuous flicker can cause to some damages to electrically sensitive loads as well as human's visual irritations, it needs to be appropriately managed by being accurately measured, quantified and assessed. In Korea, an equivalent 10-Hz flicker index, shortly ${\Delta}V10$, is used to determine the permission limit of flicker. This paper presents an efficient calculation of the flicker index by using a half-cycle sliding window and a recursive method, showing a concrete calculating procedure of ${\Delta}V10$ from the viewpoint of signal processing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.4
• /
• pp.309-318
• /
• 2010

This paper presents a simulation model based on support vector regression (SVR) for flicker estimation emitted from the wind turbines. For the SVR training, the voltage variation and flicker level are selected as input and output, respectively. Through the off-line training, the relationship between the voltage variation and flicker level is derived. The required amount of data for the flicker measurement is decreased and its proessing time is also reduced. The simulation and experiment results have shown that the flicker estimation is performed accurately.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.117-119
• /
• 2009

This paper presents a simulation model based on support vector regression (SVR) for flicker emission estimation from wind turbines. Training patterns are developed by varying the wind speed and network parameters that might affect the expected flicker levels. A comparison is done to the fixed speed wind turbine (WT), which leads to a conclusion that the factors mentioned above have different influences on flicker emission. The simulation results have shown that the flicker estimation is performed accurately.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.310-312
• /
• 2002

The development of IEC 61400-21 provides firm basis for assessment of the impact of wind turbines on voltage quality. This paper presents analysis and modeling of the flicker emission of wind turbines. The paper concentrates on the theoretical aspects of the flicker algorithm, wind turbine characteristics and the generation of flicker during continuous operation of wind turbines. It also introduces a simplified assessment to limit the flicker emission.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.557-567
• /
• 1994

This study was conducted to examine the effect of chronic low dose organic solvent exposures in the industries towards then neurobehavioral functions of workers. Subjective symptoms on neurobehavioral function as well as a visual reaction time test (Flicker test) were administered to 94 exposed and 162 unexposed workers in a oil refinery and some other auto-repair shops. The results obtained were as follows : 1. Symptom complaints were higher and Flicker test values were lower in exposed workers than in unexposed workers. 2. Flicker valus were Inversely correlated with urinary Hippuric acid concentration in exposed workers(r=-0.26, p<0.05). 3. Flicker valus were inversely co..elated with Subjective symptom score(r=-0.15, p<0.05). Low Flicker value were also related with some subjetive symptoms such as 'Dimmed vision', 'Nightmare', 'Weakness on extrimity' in workers as a whole. While symptoms of 'Dimmed vision ', 'Nightmare' only observed among exposed workers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.577-580
• /
• 2010

This paper proposes a new algorithm for flicker reduction. Flicker is defined as unwanted luminance fluctuation in the image sequences. As the flicker degrades the performance of motion estimation or segmentation of the objects, it should be corrected before further processing. In this paper, we model the flicker effects as a linear system with gain and offset parameter and propose the new algorithm for flicker reduction. The proposed algorithm considers gain and offset parameter separately, and stabilizes the luminance fluctuation based on these parameters. We show the performance of the proposed method by testing on the sequence with artificially added luminance flicker and real sequence with object motion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.4
• /
• pp.262-267
• /
• 2014

This study describes that light flicker of LED lamp is improved by placing an AC-powered LED block in each phase of three-phase AC power. Rectified current is considered as an instantaneous luminous flux because the current flowing through the LED block is proportional to the amount of light emitted by the LED block. Percent flicker is calculated simply by modeling the rectified current flowing through the LED block to a triangular wave current. Percent flicker is 100% in single-phase AC powered LED lamp. Percent flicker of the same level as that in an incandescent lamp (6%~14%) is however, achieved if light emission starts before $40^{\circ}$ in each voltage phase of three-phase AC power.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.263-266
• /
• 2009

H.264/AVC 표준의 화면내 부호화 방법은 화면내 예측을 통한 예측값과 현재 블록의 화소값의 차이를 변환 계수로 변환하고, 이를 양자화 및 엔트로피 부호화하는 순서로 부호화가 진행된다. 그러나 화면내 부호화 방법은 영상간의 시간적 상관성을 이용하지 않고 비교적 상관도가 낮은 공간적 상관성을 이용하기 때문에 화면간 부호화 방법에서는 발견되지 않는 flicker 효과가 발생하게 된다. 일반적으로 flicker 효과는 양자화 및 역양자화 과정에서 변환 계수값의 차이가 크게 증가하기 때문에 발생한다. 따라서 화면내 부호화 방법을 사용하면 flicker 효과로 인해 주관적인 화질이 크게 열화됨에도 불구하고, 이를 위한 해결책이 많지 않다. 본 논문에서는 flicker 효과를 정의하고 flicker 효과의 발생 이유를 분석한다. 이를 바탕으로 flicker 효과를 효과적으로 감소시킬 수 있는 양자화 방법을 제안한다.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.225-228
• /
• 2001

We simulated and analyzed the flicker phenomena in the poly-Si TFT-LCD using PSpice for the development of wide-area and high-quality LCD display We define the electric quantity of flicker in the TFT-LCD, which is the ratio of half frame frequency (30Hz) to DC (0 Hz) frequency. We compared two different types of TFTs, excimer laser annealed (ELA) poly-Si TFT and silicide mediated crystallization (SMC) poly-Si TFT, and found that the ELA and SMC TFTs show different flicker characteristics because of their mobility and leakage current. In addition, we showed that the gate voltage should be chosen carefully at the minimum flicker because of the larger leakage current of poly-Si Tn as compared with a-Si TFT