• Title/Summary/Keyword: flat space

검색결과 504건 처리시간 0.028초

iOS GUI 디자인의 변화에 대한 어포던스 관점의 고찰 (A Study on Transformation of iOS GUI Design in the view of Affordance)

  • 양운;김형우
    • 스마트미디어저널
    • /
    • 제5권4호
    • /
    • pp.96-102
    • /
    • 2016
  • 본 연구는 iOS GUI 디자인의 변화에 함의된 어포던스의 변화와 이를 통한 어포던스 간의 관계를 고찰하는 것을 목적으로 하였다. 선행연구를 통해 다양한 어포던스 개념을 도출하고 연구에 사용될 6가지 어포던스(본능적, 행동적, 반성적, 명시적, 메타포적, 패턴 어포던스)를 선정하고 iOS의 GUI 디자인 변화를 어포던스 관점에서 고찰하여 다음과 같이 그 결과를 도출하였다. 첫째, iOS GUI 디자인의 본능적 어포던스는 이미 충분한 반성적 어포던스를 형성하고 있어 이를 과감히 생략하거나 제거하고 있으며 이로 인해 보다 명확한 명시적 어포던스의 제공이 가능하다. 둘째, iOS의 행동적 어포던스와 패턴 어포던스는 사용 경험의 누적으로 인해 반성적 어포던스를 형성하고 있으며 이를 통해 새로운 패턴 어포던스를 형성하고 있으며 이는 또한 메타포적 어포던스의 기반 영역으로도 활용된다. 셋째, iOS의 플랫 디자인을 어포던스 관점에서 고찰해 본 결과, 본능적 어포던스의 감소로 인하여 시각적 표현 상의 제약이 줄어들게 되어 화면 공간의 여유, 컬러 변화의 자유, 명시적 어포던스의 제공 등이 가능하게 된 것도 그 원인 중 하나임을 알 수 있었다. 또한 본 연구에서는 본능적 어포던스가 사용경험 누적에 따라 반성적 어포던스를 형성하고 이는 메타포적 어포던스의 기반 영역으로 활용되며, 본능적 어포던스의 제거나 감소는 보다 명확한 명시적 어포던스를 제공하고 있으며 이를 통해 새로운 패턴 어포던스가 생성되는 어포던스 간의 상호작용에 의한 관계 변화 또한 고찰할 수 있었다.

한국 성인여성의 브래지어 착용 및 구매실태 조사연구 - 20대 전반 여대생을 중심으로 - (The Conditions for Wearing and Purchasing Brassieres by Korean Women - Based on the Female College Students in their Early 20's -)

  • 차수정;손희순
    • 한국의류학회지
    • /
    • 제34권2호
    • /
    • pp.303-317
    • /
    • 2010
  • This study helps in the production of brassieres suitable for female adults by researching the actual wearing conditions and purchasing status, satisfaction rate, and preferences of female college students in their early 20's. The collected data was analyzed by a SPSSWIN 13.0 Program and the results of the research are as follows. 1. There is a noticeable difference between the breast satisfaction rate and breast size, in addition the satisfactory rate was higher in the normal breast size or a little ample size than in the very small or very big size. According to the shape, the satisfactory rate for the breast appeared to be high in the case of the recognition and evaluation of the hemisphere type than the flat, cone, pop out, and downward type. 2. For fitness, the looseness at the top of the cup (pressed between the breasts at the upper part of the front middle), pressing and looseness at the upper sides of the cup, inappropriate size of the cup, tightness of the wings, tightness at the bottom round of the breasts, the narrow width of the wire, wide space of the shoulder strings, and the sliding of the shoulder strings had problems that needed improvement. 3. The major priorities for purchasing brassieres are size, fitness, and aesthetic qualities. As a result, the size and the fitness are more important than the trend or decorations since the brassiere has the function to support the breasts that shows that hygiene and sanitation are recognized as an important standard for undergarment selection. The size and the fitness are important factors regardless of breast types in the examination of the selection standards of the brassieres for each breast type, but the cone and hemisphere types have higher preferences for design; the pop out type has more considerations for the material of the cloth. The result show that appearance is more important for smaller breasts, but the functionality of the brassier is more important than the appearance for medium and larger breast sizes.

LATEST RESULTS OF THE MAXI MISSION

  • MIHARA, TATEHIRO
    • 천문학논총
    • /
    • 제30권2호
    • /
    • pp.559-563
    • /
    • 2015
  • Monitor of All-sky X-ray Image (MAXI) is a Japanese X-ray all-sky surveyer mounted on the International Space Station (ISS). It has been scanning the whole sky since 2009 during every 92-minute ISS rotation. X-ray transients are quickly found by the real-time nova-search program. As a result, MAXI has issued 133 Astronomer's Telegrams and 44 Gamma-ray burst Coordinated Networks so far. MAXI has discovered six new black holes (BH) in 4.5 years. Long-term behaviors of the MAXI BHs can be classified into two types by their outbursts; a fast-rise exponential-decay type and a fast-rise flat-top one. The slit camera is suitable for accumulating data over a long time. MAXI issued a 37-month catalog containing 500 sources above a ~0.6 mCrab detection limit at 4-10 keV in the region ${\mid}{b}{\mid}$ > $10^{\circ}$. The SSC instrument utilizing an X-ray CCD has detected diffuse soft X-rays extending over a large solid angle, such as the Cygnus super bubble. MAXI/SSC has also detcted a Ne emission line from the rapid soft X-ray nova MAXI J0158-744. The overall shapes of outbursts in Be X-ray binaries (BeXRB) are precisely observed with MAXI/GSC. BeXRB have two kinds of outbursts, a normal outburst and a giant one. The peak dates of the subsequent giant outbursts of A0535+26 repeated with a different period than the orbital one. The Be stellar disk is considered to either have a precession motion or a distorted shape. The long-term behaviors of low-mass X-ray binaries (LMXB) containing weakly magnetized neutron stars are investigated. Transient LMXBs (Aql X-1 and 4U 1608-52) repeated outbursts every 200-1000 days, which is understood by the limit-cycle of hydrogen ionization states in the outer accretion disk. A third state (very dim state) in Aql X-1 and 4U 1608-52 was interpreted as the propeller effect in the unified picture of LMXB. Cir X-1 is a peculiar source in the sense that its long-term behavior is not like typical LMXBs. The luminosity sometimes decreases suddenly at periastron. It might be explained by the stripping of the outer accretion disk by a clumpy stellar wind. MAXI observed 64 large flares from 22 active stars (RS CVns, dMe stars, Argol types, young stellar objects) over 4 years. The total energies are $10^{34}-10^{36}$ erg $s^{-1}$. Since MAXI can measure the spectrum (temperature and emission measure), we can estimate the size of the plasma and the magnetic fields. The size sometimes exceeds the size of the star. The magnetic field is in the range of 10-100 gauss, which is a typical value for solar flares.

중공사 고분자 분리막을 통한 단일기체($SF_6$, $N_2$, $O_2$, $CF_4$) 투과플럭스의 온도와 압력에 따른 변화특성 (Variation of Single Gas ($SF_6$, $N_2$, $O_2$, $CF_4$) Permeance through Hollow Fiber Polymeric Membranes Depending on Temperature and Pressure)

  • 이민우;이순재;김한별;김성현;이상협
    • 멤브레인
    • /
    • 제22권1호
    • /
    • pp.23-34
    • /
    • 2012
  • 중공사 고분자 분리막을 이용한 SF6를 분리 농축을 위한 운전조건을 결정하기 위해서는, 온도와 압력이 투과특성에 미치는 영향에 관한 연구가 필요하다. 본 연구에서는 다양한 온도와 압력이 부과된 조건에서 단일기체 투과실험을 수행하여, 중공사 고분자 분리막(PSF, PC, PI)을 통한 기체($N_2$, $O_2$, $SF_6$, $CF_4$)의 투과특성을 연구하였다. 실험결과, 기체의 투과플럭스는 온도와 압력의 증가에 따라 일반적으로 증가하는 것으로 나타났으나, 분리막에 따른 투과플럭스의 차이가 관찰되었으며, 온도, 압력에 따른 투과플럭스 변화율은 기체의 특성(분자크기)에 따라 다른 것으로 나타났다. 온도 압력에 대한 투과플럭스를 3차원적으로 표현했을 때, 투과플럭스는 근사적인 평면 위에서 변화하는 것으로 관측되었다. 온도와 압력에 의한 투과플럭스 변화를 열역학적으로 분석하였으며, 투과플럭스 예측을 위한 경험적 모델로 평면특성의 1차 다항식 모델과 곡면 특성을 가진 2차 다항식 모델을 제안하였다. 그 결과 두 경험적 모델 모두 관측자료에 대한 높은 적합도를 보여 적용가능성을 확인하였다.

밭담은 태풍에 왜 안 무너지나?: 비직교 대칭 하중 아다마르 행렬에 의한 수학적 접근 I (Why Won't the Field Wall Collapse in the Typhoon? : Mathematical Approach to Non-orthogonal Symmetric Weighted Hadamard Matrix I)

  • 이문호;김정수
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권5호
    • /
    • pp.211-217
    • /
    • 2019
  • 제주의 3대 발명은 1234년 김구 판관의 밭담, 제주 사람들의 방목문화 관습에서 나온 정낭, 1406년 문방귀의 묘의 신문인 올레 등을 들 수 있다. 돌과 돌의 수 눌음에서 나온 외담인 밭담은 친족사회인 괸당을 만들었다. 30m/s 이상 불어오는 태풍에도 약 1.5m 높이인 밭담은 무너지지 않는다. 마찬가지로 제주 사회의 괸당도 어떤 어려움이 닥쳐도 서로 도와 무너지지 않는다. 밭담을 쌓을 때는 밑돌인 괸돌 둘을 나란히 평면으로 붙이고 그 위에 왼쪽 윗돌로 괴고 옆에 오른쪽 윗돌을 상보적으로 붙인다. 밭담이 밑에서 위쪽으로 한 돌, 두 돌 붙여나가는데 가운데 돌은 조금 작거나 큰 비정형 돌들로 쌓으면 하나의 공간에선 평면 밭담이 된다. 괸당은 할아버지, 할머니-아버지, 어머니-나를 중심으로 가깝고, 먼 혈족이 수직관계를 나타낸다. 밭담은 밑에서 위로 쌓아가는 수직관계인 데 반하여, 괸당은 윗대 할아버지 친족에서 아랫대의 손자까지 피를 나누어가는 수평 관계다. 본 논문은 밭담 가운데 돌이 큰 돌(작은 돌)을 놓는가에 대해서 비직교 대칭 하중 Hadamard 행렬로 접근한다.

입도분포 특성을 기반으로 한 고창 연안의 과거 퇴적환경 분석 (Analysis of Paleo Sedimentary Environment of Gochang Coast Using Grain Size Distribution Characteristics)

  • 한민;양동윤;박찬혁
    • 한국지형학회지
    • /
    • 제25권3호
    • /
    • pp.43-55
    • /
    • 2018
  • This study aimed to identify different sedimentary environments of Gochang coast according to geomorphic conditions of each bore hole. To achieve the aim, this study utilized the classification of sedimentary environmental conditions of surface sediment, which was based on grain size distribution characteristics.In other words, three sedimentary environmental conditions ofsandy flat + sand beach, coastal sand dune and weathered bedrock soil, which were distinguished based on grain size distribution characteristics of mean-sorting for surface sediments, were applied to the sediments of bore holes. Four sedimentary environments could be identified in Gochang coast. First, the lake sedimentary environment originated from terrestrial sediments seems to have been dominated by weathered bedrock soil that the surface flow has deposited in a coastal wetland or a boundary, which is affected by the sea. Second, the lake sedimentary environment that is little affected by coastal sand dunes is located at the center of a valley, which is connected to the land, and the dune slack of Saban-ri. The surface flow of weather bedrock soil is the main source of deposits. However, there seems to have been a temporary influence of the sea. Third, the lake sedimentary environment that is strongly affected by coastal sand dunes is located at the dune slack of Yeongjeong-ri. This environment shows traces of a change from a coastal sand dune into the dune slack. Finally, the coastalsand dune sedimentary environment, which wasinvestigated by boring the current coastal sand dune, shows a temporary influence of the land but seems to have maintained the overall stability. Consequently, this study demonstrated that the grain size distribution characteristics of the present surface sediments could be effectively applied to identify the sedimentary environments of the paleo bore hole sediments. In addition, the paleo change of sedimentary environment could also be identified in many places of Gochang coast. If the results of this study are combined with the age dating and geochemical analysis in future works, the paleo environmental change in Gochang coast will be restored more precisely.

Comparison of behavior of high-rise residential buildings with and without post-tensioned transfer plate system

  • Byeonguk Ahn;Fahimeh Yavartanoo;Jang-Keun Yoon;Su-Min Kang;Seungjun Kim;Thomas H.-K. Kang
    • Computers and Concrete
    • /
    • 제31권4호
    • /
    • pp.337-348
    • /
    • 2023
  • Shear wall is commonly used as a lateral force resisting system of concrete mid-rise and high-rise buildings, but it brings challenges in providing relatively large space throughout the building height. For this reason, the structure system where the upper structure with bearing, non-bearing and/or shear walls that sits on top of a transfer plate system supported by widely spaced columns at the lower stories is preferred in some regions, particularly in low to moderate seismic regions in Asia. A thick reinforced concrete (RC) plate has often been used as a transfer system, along with RC transfer girders; however, the RC plate becomes very thick for tall buildings. Applying the post-tensioning (PT) technique to RC plates can effectively reduce the thickness and reinforcement as an economical design method. Currently, a simplified model is used for numerical modeling of PT transfer plate, which does not consider the interaction of the plate and the upper structure. To observe the actual behavior of PT transfer plate under seismic loads, it is necessary to model whole parts of the structure and tendons to precisely include the interaction and the secondary effect of PT tendons in the results. This research evaluated the seismic behavior of shear wall-type residential buildings with PT transfer plates for the condition that PT tendons are included or excluded in the modeling. Three-dimensional finite element models were developed, which includes prestressing tendon elements, and response spectrum analyses were carried out to evaluate seismic forces. Two buildings with flat-shape and L-shape plans were considered, and design forces of shear walls and transfer columns for a system with and without PT tendons were compared. The results showed that, in some cases, excluding PT tendons from the model leads to an unrealistic estimation of the demands for shear walls sit on transfer plate and transfer columns due to excluding the secondary effect of PT tendons. Based on the results, generally, the secondary effect reduces shear force demand and axial-flexural demands of transfer columns but increases the shear force demand of shear walls. The results of this study suggested that, in addition to the effect of PT on the resistance of transfer plate, it is necessary to include PT tendons in the modeling to consider its effect on force demand.

이웃해 탐색 알고리즘 기반의 특수화물 팔레트 크기 최적화 (Pallet Size Optimization for Special Cargo based on Neighborhood Search Algorithm)

  • 신현수;김창현;하창완;김환성
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2023년도 춘계학술대회
    • /
    • pp.250-251
    • /
    • 2023
  • 팔레트는 낱개의 여러 화물을 동시에 묶어 운송할 수 있게 하는 하역 장비로써 원자재 조달에서부터 소비자에게 전달되기까지의 흐름을 통합적으로 연결하는 중요한 요소이다. 더불어 일관수송을 통한 비용 절감, 거래단위의 표준화, 운송수단의 효율적인 운영, 하역작업 개선을 목적으로 팔레트 표준화가 활발히 진행됨에 따라 T-11형, T-12형 등의 표준 팔레트가 우리나라 물류 산업 전반에 걸쳐 사용되고 있다. 그러나 대형·중량화물을 비롯한 특수화물의 경우, 크기 및 중량 등의 이유로 표준 팔레트에 적재하는 것이 불가능하기에 대부분 자체 팔레트를 개발하여 사용하고 있다. 본 연구는 다양한 특수화물을 취급하는 팔레트의 크기를 결정하는 문제로써, 특수화물의 종류, 크기 및 중량, 보관 수량 등을 고려하여 최적 팔레트 크기를 산출하고자 한다. 이를 위해, 이웃해 탐색 알고리즘을 변형하여 전역 최적해를 찾을 수 있는 최적화 기법을 제안하였으며, 입력 데이터로서는 특수화물의 종류별 제원 및 보관 수량 정보, 제약조건 관련 정보가 사용되었다. 또한, 특정한 특수화물을 대상으로 최적화 시뮬레이션을 수행하여 최적해 도출 여부를 확인함으로써 본 최적화 기법의 최적성을 검증하였다.

  • PDF

탁영·탁족의 문화 변용을 통해 본 정원유구 (A Study on the Culture Transformation about "Takyung-Takjok" in Traditional Landscape Ruins)

  • 노재현;서효석;최종희;한상엽
    • 한국전통조경학회지
    • /
    • 제34권1호
    • /
    • pp.97-106
    • /
    • 2016
  • 탁족(濯足)의 문화현상과 그 기저에 담긴 배경과 의미 그리고 '탁영탁족(濯纓濯足)' 관련 어휘를 전부지명소(前部地名素)로 하는 전통 정원유구의 탐색을 통해, 탁족문화의 변용양상과 그 계승 방안을 모색하고자 한 연구 결과는 다음과 같다. 첫째, 세속에 물들지 않고 자연에 순응하는 초연한 삶을 비유한 '탁영탁족'의 문화현상은 '수신(修身)' 혹은 '세속을 초탈한 은일(隱逸)' 행위의 산물이자, 흐르는 물에 발을 닦으며 유유자적하는 탁족지유(濯足之遊)의 풍류문화였다. 둘째, '탁영탁족'의 문화현상은 누정이나 재실의 당호, 별서의 세부 명칭, 팔경과 구곡의 경물 그리고 산수정원의 바위에 새겨진 바위글씨 등 다양한 형태와 방식의 향유문화로 변용되어 왔다 셋째, '탁영'과 '탁청'을 전부지명소로 하는 정원유적이 압도적인 비율로 영남지역에 집중 분포하고 있음은 영남사림의 구곡원림 및 서원 경영과 깊숙이 관련된 것으로 보인다. 넷째, '탁영탁족' 뿐만 아니라 탁청(濯淸) 탁오(濯吾) 탁사(濯斯) 탁천(濯泉) 등의 전부지명소와 헌(軒) 정(亭) 재(齋) 암(巖) 대(臺) 담(潭) 반(盤) 석(石) 소(沼), 산(山) 봉(峰) 지(池) 천(泉) 등의 후부지명소의 조합적 구성을 통해 다채로운 정원유구의 명칭 변용이 이루어져 왔다. 탁족의 정신문화는 현대적 조경설계에서도 새롭게 조명되어야 할 휴양콘텐츠일 뿐 아니라 탁족 행위에 깃든 정신이야말로 물을 주제로 한 휴양 레크리에이션 공간에서 마땅히 상고(尙古)해야 할 힐링의 개념이다.

원숭이 외측슬상체배측핵에서 칼슘결합단백 Parvalbumin과 Calbindin-D 28K의 분포 (Immunocytochemical Localization of Parvalbumin and Calbindin-D 28K in Monkey Dorsal Lateral Geniculate Nucleus)

  • 고승희;배춘상;박성식
    • Applied Microscopy
    • /
    • 제24권4호
    • /
    • pp.61-77
    • /
    • 1994
  • The calcium-binding proteins (CaBP), parvalbumin (PV) and calbindin-D 28K (calbindin) are particularly abundant and specific in their distribution, and present in different subsets of neurons in many brain regions. Although their physiological roles in the neurons have not been elucidated, they are valuable markers of neuronal subpopulations for anatomical and developmental studies. This study is designed to characterize dorsal lateral geniculate nucleus (dLGN) neurons and axon terminals in terms of differential expression of immunoreactivity (IR) for two well-known CaBPs, PV and calbindin. The experiments were carried out on 6 adult monkeys. Monkeys were perfused under deep Nembutal anesthesia with 2% paraformaldehyde and 0.2% glutaraldehyde in 0.1M phosphate buffer. After removal, the brains were postfixed for 6-8 hr in 2% paraformaldehyde at $4^{\circ}C$ and infiltrated with 30% sucrose at $4^{\circ}C$. Thereafter, they were frozen in dry ice. Serial sections of the thalamus, at $20{\mu}m$, were made in the frontal plane with a sliding microtome. The sections were stained for PV and calbindin with indirect immunocytochemical methods. For electron microscopy, after infiltration with 30% sucrose the blocks of thalamus were serially sectioned at $50{\mu}m$ with a Vibratome in the coronal plane and stained immediately by indirect ABC methods without Triton X-100 in incubation medium. Stained sections were postfixed in 0.2% osmium tetroxide, dehydrated and flat-embedded in Spurr resin. The block was then trimmed to contain only a selected lamina or interlaminar space. The dLGN proper showed strong PV IR in fibers in all laminae and interlaminar zones. Particularly dense staining was noted in layers 1 and 2 that contain many stained fibers from optic tract. Neuronal cell body stained with PV was concentrated only in the laminae. In these laminae staining was moderate in cell bodies of all large and medium-sized neurons, and was strong in cell bodies of some small neurons together with their processes. Calbindin IR was marked in the neuronal cell body and neuropil in the S layers and interlaminar zones whereas moderate in the neuropil throughout the nucleus. Regional difference in distribution of PV and calbindin IR cell is distinct; the former is only in the laminae and the latter in both the S layer and interlaminar space. The CaBP-IR elements were confined to about $10{\mu}m$ in depth of Vibratome section. The IR product for CaBP was mainly associated with synaptic vesicle, pre- and post-synaptic membrane, and outer mitochondrial membrane and along microtubule. PV-IR was noted in various neuronal elements such as neuronal soma, dendrite, RLP, F, PSD and some myelinated or unmyelinated axons, and was not seen in the RSD and glial cells. Only a few neuronal components in dLGN was IR for calbindin and its reaction product was less dense than that of PV, and scattered throughout cytoplasm of soma of some relay neurons, and was also persent in some dendrite, myelinated axons and RLP. The RSD, F, PSD and glial elements were always non-IR for calbindin. Calbindin labelled RLP were presynaptic to unlabeled dendrite or dendritic spine and PSD. Calbindin-labeled dendrite of various sizes were always postsynaptic to unlabeled RSD, RLP or F. From this study it is suggested that dLGN cells of different functional systems and their differential projection to the visual cortex can be distinguished by differential expression of PV and calbindin.

  • PDF