• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.341-351
• /
• 2016

In this present work, the effect of hole shapes, orientation and hole arrangements on film cooling effectiveness has been carried out. For this work a flat plate has been considered for the computational model. Computational analysis of film cooling effectiveness using different hole shapes with no streamwise inclination has been carried out. Initially, the model with an inclination of $30^{\circ}$ has been verified with the experimental data. The validation results are well in agreement with the results taken from literature. Five different hole shapes viz. Cylindrical, Elliptic, Triangular, Semi-Cylindrical and Semi-Elliptic have been compared and validated over a wide range of blowing ratios. The blowing ratios ranged from 0.67 to 1.67. Later, orientation of holes have also been varied along with the number of rows and hole arrangements in rows. The performance of film cooling scheme has been given in terms of centerline and laterally averaged adiabatic effectiveness. Semi-elliptic hole utilizes half of the mass flow as in other hole shapes and gives nominal values of effectiveness. The triangular hole geometry shows higher values of effectiveness than other hole geometries. But when compared on the basis of effectiveness and coolant mass consumption, Semi-elliptic hole came out to give best results.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.1-11
• /
• 2004

본 연구에서는 비정렬 격자계에서 가장 많이 쓰이는 근사 해법 중에 하나인 LU 기법의 Navier-Stokse 방정식에 대한 수렴성 및 안정성에 관한 연구를 수행하였다. 적절한 스칼라 모델 방정식을 사용하여 LU 기법이 갖는 고유한 특성에 관한 해석적 논의를 수행하였으며, 이를 Navier-Stokes 방정식으로 확장하여 해석하였다. 그 결과 LU 기법의 강성도는 격자 종횡비가 높아짐에 띠라, 그리고 격자 레이놀즈 수 감소함에 따라 증가하게 된다. 또한 내부반복계산을 통해서 이러한 강성도가 부분적으로 극복될 수 있음을 보였으며, 평판 난류 유동 해석을 통해서 해석 결과를 검증하였다.

• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.714-719
• /
• 2007

본 연구에서는 적외선(Infra-Red) 카메라를 이용하여 원형 노즐을 통한 고속 제트 분사 시 수직 충돌 벽면에서 나타나는 정상상태(steady state)의 단열 벽면 온도를 2차원적으로 측정하였다. 출구 노즐 직경으로 표현된, Reynolds 수 187,000에서 노즐-평판간 거리 변화의 영향을 살펴보았으며, 측정된 단열 벽 온도는 회복 계수로 무차원화 하였다. 한편 열전대를 이용하여 측정한 단열 벽면 온도를 적외선 카메라를 이용한 측정 결과와 비교하여 검증하였다.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.403-416
• /
• 2003

There are common features, in both imaging surveys and image processing, between astronomical observations and remote sensing. Handling large amounts of data, in an easy and fast way, has become a common issue. Implementing pipeline software can be a solution to the problem, one which allows the processing of various kinds of data automatically. As a case study, the development of pipeline software for the EIS (European Southern Observatory Imaging Survey) is introduced. The EIS team has been conducting a sky survey to provide candidate targets to the 250 VLTs (Very Large Telescopes) observations. The survey data have been processed in a sequence of five major data corrections and reductions, i.e. preprocessing, flat fielding, photometric and astrometric corrections, source extraction, and coaddition. The processed data are eventually distributed to the users. In order to provide automatic processing of the vast volume of observed data, pipeline software has been developed. Because of the complexity of objects and different characteristic of each process, it was necessary to analyze the whole works of the EIS survey program. The overall tasks of the EIS are identified, and the scheme of the EIS pipeline software is defined. The system structure and the processes are presented, and in-depth flow charts are analyzed. During the analyses, it was revealed that handling the data flow and managing the database are important for the data processing. These analyses may also be applied to many other fields which require image processing.

• 대한치과교정학회지
• /
• 제4권1호
• /
• pp.57-61
• /
• 1974

The patient, a girl of 19 years in good health, had a class I malocclusion. The maxillary left centra1 incisors and both lateral incisors had already erupted. But the space for the right central incisor was partially closed by the mesial drifting of the neighboring teeth. The caused a shift in the midline and a cross-bite relation on the incisors. X-ray examination revealed the presence of the right central incisor in the alveolar bone and odontoma just above the crown of the right central incisor. After enough space for the impacted incisor was created in the dental arch with a open-coil spring the rectangular incision was made. Removing the odontoma uncovered the flat surface of the labial aspect of the incisor. During the tooth had erupted of its own accord, any unnecessary force had been imposed on the tooth. When it was decided that the tooth should be brought out by the mechanical device, the gold cast onlay with hook was used and run a light elastic between this hook and the main arch wire. Finally the tooth was brought down to the arch level. The result was excellent. Fortunately the esthetic problem and any detrimental effects on the psychological make-up could be avoided.

• 한국주거학회논문집
• /
• 제11권3호
• /
• pp.99-107
• /
• 2000

The purpose of this study was to identify the universal design characteristics in residential environments. The subjects were 135 physically disabled persons who lived in the rental multi-family housing apartments in Pusan. Interview method was used for this study. They were an average age of 51 years and 63% were male. They were low income families and lived in 12 pyung ($39.75\textrm{m}^2$) apartments. They were asked about what housing characteristics were constraints in their daily living. They pointed out that the constraints in their apartments were as follows: 1) the small amount of space in the bathroom, kitchen, bedroom, and the entrance area of housing unit, 2) the unflat floor level between the bathroom and the hallway, or the balcony and the bedroom, 3) the slippery floor finish in the bathroom, 4) lack of grab bars or handrails in the bathroom and the ramp, 5) the kitchen work centers and the electric switches at improper height, and 6) the steep ramp. Therefore, the universal design characteristics in residential environments were the adequate amount of space, flat floor level, non-slippery floor finish, grab bars or handrails, accessible height, and ramp.

• 천문학회보
• /
• 제37권1호
• /
• pp.101.1-101.1
• /
• 2012

Interplanetary dust particles are observable as zodiacal light, which is the sunlight scattered by the interplanetary dust particles. The origins of interplanetary dust particles are still in question because they are eroded by Poynting-Robertson photon drag and mutual collisions among dust particles. The small-scale structures in the zodiacal light provided a clue to specify their origins. Asteroidal debris were detected as band-like structures (dust bands), and the cometary large particles were detected as narrow trails (dust trails). However, little is confirmative about their detailed origins and mineralogical compositions because of the lack of observational data particularly in the optical wavelength. We made a high-resolution optical zodiacal light map based on the CCD observations at Mauna Kea, Hawaii. We analyzed data taken on November 12, 2004. After the data reduction, such as flat fielding and subtraction of airglow emissions, we succeeded in the construction of the zodiacal light map with the spatial resolution of 3' in the solar elongation between 45 degree and 180 degree. This is the highest resolution map in the visible wavelength so far. In this map, we confirmed the dust bands structures near the ecliptic plane. We will discuss about the similarities and the differences between optical and infrared dust bands.

• 복식
• /
• 제57권2호
• /
• pp.155-171
• /
• 2007

Exaggerated expressions of contemporary fashion have exceeded historical precedents in volume. The purpose of this study is to understand the aesthetic characteristics of expanded form In contemporary fashion. To take dresses beyond their flat shapes into three-dimensional forms, it was investigated into volume of dresses by using the void and the mass. The void Is rarefied space and the mass is densified space. The void of dresses could be constructed from the boning such as panier and stiff textiles as organza lining. The mass could be constructed from padding. Fold, pleats, twist, and the layering of fabrics show features of both the void and the mass. Contemporary fashion designers relied on the void rather that the mass to make the enormous volume because of the weight of the mass. X-silhouette and the expansion of skirt and sleeve were dominant as the result of accentuating the body with a waistline. However, many of expanded dresses were so voluminous that they obscured the body's outlines. Some forms were strange and shocking. Many designers explored the void and there were a multitude of methods to construct the void: compartments of air, architectural techniques, technical textiles, fold such at origami. The aesthetic consciousness of expanded dresses could be classified into 7 categories, the giant, the dynamic, the deconstructive, the historical, the comedic, the rhythmical, and the technical character.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.63-69
• /
• 2015

In this study, a 2D hydrodynamic model equipped with critical dry depth scheme was developed to reproduce the flow over staircase. The channel geometry of hydraulic experiment conducted by Ishigaki et al. was generated in the computational space, and the developed model was validated against flow properties such as discharge, velocity and momentum. In addition, the water surface profile and the velocity distribution evolved in flow over two layers staircases were analyzed. When the initial water depth at the upper floor was 0.3 m, the maximum velocity at lower floor was 4.2 m/s, and the maximum momentum was $1.2m^3/s^2$, and its conversion to force per unit width was 1.2 kN/m. This value was equivalent to the hydrostatic force with 50 cm water depth, and evacuation became difficult, as proposed by Ishigaki et al. For the flow over staircases connecting two layers, the maximum run-up height in flat part connecting two layers was approximately two times higher than the initial water depth in upper floor, and the rapid shock wave with sharp front and long tail was propagated.

• 한국조경학회지
• /
• 제32권5호
• /
• pp.35-42
• /
• 2004

This study examines the traffic noise reduction effects of the diverse efficiency features of a sunken square, and investigates the reduction effects and characteristics of noise alterations according to the construction conditions in order to verify its possibility as a new noise reduction facility. The measured data were analyzed. As a result, (1) the traffic noise from the roads around the sunken squares exceeded the regulatory standards; (2) the sunken squares were protected from noise; (3) the sunken spaces yielded a greater reduction by 6∼7dB than the flat ground thanks to the diffraction effect; and (4) there were fine changes to noise according to the conditions of space construction. In short, a sunken square has the potential to afford new applications as a noise reduction facility in a highly concentrated downtown with the existing defects solved. In addition, its use for effective noise control is evident based on the noise characteristics of a space. Future studies need to include efforts to provide clearer quantitative data, as well as research on shape, layout, and materials.