• 제목/요약/키워드: flat plate system

검색결과 344건 처리시간 0.025초

Wall Column을 적용한 플랫플레이트 접합부 강도발현에 관한 연구 (A Study on Strength of Plat-Plate Wall-Column Connections)

  • 이도범;박홍근;이리형
    • 콘크리트학회논문집
    • /
    • 제18권2호
    • /
    • pp.257-266
    • /
    • 2006
  • 최근 공기단축, 낮은 층고, 자유로운 평면계획 등의 많은 장점을 가지는 플랫플레이트 구조형식이 고층주거건물의 구조형식으로 많이 사용되고 있다. 특히 국내에서 건설되고 있는 플랫플레이트 구조시스템은 횡력에 대한 저항성을 크게 하기 위하여 기둥의 단면이 매우 크며 직사각형 형태를 가지는 벽기둥(wall-column)을 사용하는 경우가 많으므로 접합부 강도산정모형에서는 이러한 기둥의 형태적 요소를 적절히 반영해야 한다. 기둥단면형상에 따른 플랫플레이트-기둥 접합부의 거동특성을 분석하기 위하여 기존의 강도모델을 검토하고 비선형 유한요소해석을 실시하였다. 기존 강도모델은 위험단면에서의 전단응력분포를 가정함에 있어서 기둥단면형상의 영향을 고려하지 못하여 플랫플레이트-기둥 접합부의 강도를 정확하게 예측하지 못하였다. 비선형 유한요소해석 결과, 하중가력방향과 평행한 기둥폭이 길어질수록 위험단면 측면에서 비틀림 전단을 받는 유효영역과 측면 최대전단강도가 줄어들어 접합부의 강도가 큰 폭으로 감소한다. 따라서 플랫플레이트-기둥 접합부의 강도를 정확히 산정하기 위해서는 하중가력방향과 평행한 기둥폭의 길이($c_1$)이 접합부 거동에 미치는 영향을 적절히 반영해야 할 것이다.

기상조건과 축열조 용량에 따른 평판형 태양열 집열기 시스템의 동적 성능 해석 (Dynamic performance analysis of flat plate solar collector system according to weather conditions and capacity of heat storage tank)

  • 박배덕;김규덕;김경훈
    • 한국태양에너지학회 논문집
    • /
    • 제34권6호
    • /
    • pp.57-65
    • /
    • 2014
  • Solar energy has attracted wide attention as a promising renewable energy source. The goal of this paper is to estimate the dynamic performance of solar flat plate collector system according to the weather conditions and the capacity of heat storage tank. This study provides a detailed description of the modeling methods and materials of the system. The effects of the daily clearness index and the volume of the heat storage tank on the hourly and daily performances of the system are numerically investigated. Special attention is focused on the important system variables including the solar insolation on the collector surface, useful energy, heat loss at the collector, and collector efficiency.

열파이프가 부착된 평판형 태양열 집열기의 열전달 특성에 대한 실험적 고찰 (An Experimental Study on the Heat Transfer Characteristics for a Flat Plate Solar Collector with a Heat Pipe)

  • 김철주;임광빈
    • 대한기계학회논문집
    • /
    • 제17권5호
    • /
    • pp.1237-1245
    • /
    • 1993
  • 본 연구에서는 그 동안 본 실험실에서 태양열 집열기용으로 개발한 에탄올 열파이프를 집열판에 설치하여 집열기 모델을 설계 제작하였다. 그리고 실제 태양 복사하에서 집열기의 집열과 열이송과정에 대한 특성을 검토함으로써 열파이프의 적 응성을 확인하였다. 특히 열파이프의 시동 및 작동상태, 집열판내의 열유동과정 그리고 집열기의 집열효율에 관하여 고찰하였다.

평판형 태양열 집열기의 연중 열적 성능의 모델링 해석 (Modeling Analysis for Thermal Performance of Solar Flat Plate Collector System Through a Year)

  • 김규덕;박배덕;김경훈
    • 한국수소및신에너지학회논문집
    • /
    • 제25권5호
    • /
    • pp.541-549
    • /
    • 2014
  • The monthly-average meteorological data, in particular, the monthly average daily terrestrial horizontal insolation are required for designing solar thermal energy systems. In this paper, the dynamic thermal performance of a flat plate solar collector system is numerically investigated through a year from the monthly average insolation data in Seoul. For a specified data set of solar collector system, the dynamic behaviors of total solar radiation on the tilted collector surfaces, heat loss from the collector system, useful energy and collector efficiency are analyzed from January to December by a mathematical simulation model. In addition, the monthly average daily total solar radiation, useful energy, and daily collector efficiencies through a year are estimated. The simulated results show that the average total radiation is highest in March and the useful energy is highest in October, while the total radiation and the collector efficiency are lowest in July.

포텐셜 코어내에 설치된 충돌평판상의 열전달증진 및 유동특성에 관한 연구 (Study on the flow characteristics and heat transfer enhancement on flat plate in potential core region of 2-dimensional air jet)

  • 이용화
    • 설비공학논문집
    • /
    • 제10권2호
    • /
    • pp.193-201
    • /
    • 1998
  • A heat exchanging system employing the impinging air jet is still widely used In the various fields due to its inherent merits that include the easiness in engineering applications and the high heat and/or mass transfer characteristics. The purpose of this study is to investigate the enhancement of heat transfer and flow characteristics by placing a turbulence promoters in front of heat exchanging surface. In this study, a series of circular rods are placed at the upstream of a flat plate heat exchanger that is located at potential core region(H/W=2) of a two-dimensional impinging air jet. Heat transfer enhancement is achieved by inserting turbulence promoter that results in the flow acceleration and disturbance of boundary layer. The average Nusselt number of the flat plate with the turbulence promoters is found to be around 1.42 times higher than that of the flat plate without the turbulence promoters. Based on the results of flow visualization with a smoke wire, it is confirmed that the heat transfer enhancement is caused by the flow separation and disturbance of boundary layer by inserting the turbulence promoter.

  • PDF

표면조도를 가진 평판에서 원형충돌제트에 의한 열전달 측정 (Heat Transfer Measurements by a Round Impinging Jet on a Rib-Roughened Flat Plate)

  • 이대희;김윤택;정승훈;정영석
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집B
    • /
    • pp.87-92
    • /
    • 2000
  • This study is to investigate the heat transfer characteristics the for a round turbulent jet impinging on the flat plate with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured using liquid crystal and a digital color image processing system. The experiments were made fur the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 2 to 10, and the rib type [height ($d_1$) 2mm, pitch (p) from 12 to 36mm]. It was found that for $L/d{\ge}6$ the average Nusselt numbers on the flat plate with rib type C ($p/d_1=16$) are higher than those without rib, mainly due to an increase in the turbulent intensity caused by flow separation, recirculation and reattachment on the wall surface.

  • PDF

충돌판(衝突板) 근방(近傍)에 배열(配列)된 2차원(次元) rod가 충돌분류(衝突噴流) 열전달(熱傳達)에 미치는 영향(影響)[3] : rod직경변화(直徑燮化)에 대한효과(效果) (Heat Transfer Augmentation on Flat Plate with Two-Dimensional Rods in Impinging Air Jet System [3] : Effect of Rod Diameter)

  • 김동춘;이용화;서정윤
    • 설비공학논문집
    • /
    • 제2권4호
    • /
    • pp.295-302
    • /
    • 1990
  • The purpose of this study is augmentation of heat transfer without additional power in two-dimensional impinging air jet. The technique of heat transfer augmentation used in this experiment is to place rod bundles in front of the flat heated surface. The effects of rod diameter, nozzle-to-target plate distance and the nozzle exit velocity on heat transfer have been investigated. The main conclusions obtained from this experiment are as follows. High heat transfer augmentation is achieved by means of flow acceleration and thinning of boundary layer by placing rod bundles in front of the flat plate. Average heat transfer coefficient becomes maximum in the case of H/B=10,D=4mm. For H/B=2,D=4mm, maximum heat transfer augmentation has been determined to be about 1.5 times larger than that of the flat plate. Heat transfer augmentation by placing the rod bundles at 12m/s is to be about 2 times more than increasing nozzle exit velocity from 12m/s to 18m/s.

  • PDF

충돌분류계(衝突噴流系)에서 난류촉진체(亂流促進體)에 의한 방열효과(放熱效果)에 관(關)한 연구(硏究) (An Experimental Study on the Cooling Effect by a Turbulence Promoter in Impinging Air Jet System)

  • 이용화;서정윤
    • 설비공학논문집
    • /
    • 제4권1호
    • /
    • pp.48-56
    • /
    • 1992
  • The purpose of this study was to investigate the enhancement of heat transfer without additional external power in the case of rectangular air jet impinging vertically on the flat heating surface. In an attempt to enhance the heat transfer rate in two-dimensional impinging jet, the technique used in the present study was placement of square rod bundles as a turbluence promoter in front of the heat transfer surface. The effects of the clearance between the flat plate and square rod, and the nozzle exit velocity on the heat transfer characteristics have been investigated experimentally. The results obtained through this study were summerized as follows. High heat transfer enhancement was achived by means of flow acceleration and thinning of boundary layer by inserting rods in front of the heating flat plate. The smaller the clearance between rod and heating plate was, the larger heat transfer effect became. Average Nusselt number reached maximum at $Re=5.76{\times}10^4$ and C=1㎜ and the enhancement rate of heat transfer became maxium at this condition with the enhancement ratio as high as about 1.427 when normalized by the flat plate value. The correlating equation of average Nusselt number and Reynolds number was obtained, which is $\bar{N}uo=1.324{\cdot}Re^{0.459}{\cdot}(C/A)^{-0.034}$.

  • PDF

무량복합 및 벽식 구조시스템의 내진성능평가 (Seismic Performance Evaluation of Flat Column Dry Wall System and Wall Slab System Structures)

  • 강현구;이민희;김진구
    • 한국전산구조공학회논문집
    • /
    • 제25권3호
    • /
    • pp.259-266
    • /
    • 2012
  • 본 논문에서는 벽식 구조시스템의 일부 전단벽을 제거하여 공간의 가변성을 높인 무량복합 구조시스템의 내진성능을 ATC-63에 제시되어 있는 절차에 따라 파악하였으며, 동일한 규모의 벽식 구조시스템의 내진성능과 비교하였다. 해석모델로 12층 무량복합 및 벽식 구조시스템을 KBC 2009에 따라 설계하고 비선형 정적 및 비선형 증분 동적해석(IDA)을 수행하여 지진응답 및 붕괴거동을 파악하였다. 무량복합 시스템은 벽식 구조시스템 보다 적은 양의 콘크리트 물량으로 설계되었으며, 동일한 지진하중에 대하여 좀 더 큰 변위응답을 보이는 것으로 나타났다. IDA 해석결과 얻어진 붕괴 여유비(CMR)는 ATC-63에 제시된 한계상태를 만족하여 설계지진하중에 대하여 충분한 내진성능을 보유한 것으로 나타났다.

평판 후류가 원통 표면의 물질전달에 미치는 영향에 대한 실험적 연구 (Experimental study on the effect of flat-plate wake on mass transfer about a cylinder in crossflow)

  • 맹두진;김형수;이준식
    • 대한기계학회논문집
    • /
    • 제18권10호
    • /
    • pp.2779-2786
    • /
    • 1994
  • This study presents an experimental investigation of the effect of the wake on mass transfer about a circular cylinder in crossflow. The flat-plate wake was generated by merging two mirror images of turbulent boundary layers that were well developed along the both sides of flat plate with a sharp trailing edge. The velocity field was measured by a hot-wire system and the mass transfer rate by a naphthalene sublimation method. The mixing and developing stages of the wake were addressed to identify flow conditions. The mass transfer effects of different developing stages of the wake was discussed in detail. It is noted that a local maximum appears not at the front stagnation point but at a point a little downstream when the cylinder is located in the nearwake region and much more elevated mass transfer rate is obtained compared to effect of free-stream turbulence.