• 복식문화연구
• /
• 제18권5호
• /
• pp.892-907
• /
• 2010

The purpose of this study was to compare torso pattern made by draping and flat pattern method in terms of the size of breast. The size of this study was classified as 75A and 75D according to the size of breast. Each torso pattern by the combination of the size and pattern method was compared and analyzed. In order to test the fit of the draping and flat pattern that was developed according to the size of breast, the outer appearance was evaluated. The results of the study were as follows: First, The most striking size difference was difference between the front and the back on bust line level, which decides on position of the side seam in comparison of size between draping and flat pattern of 75A and 75D. In the flat pattern, the difference between the front and the back in the size of breast was consistent regardless of a change in the size of breast. However, in the draping, the bigger breast led to the bigger difference between the front and the back on bustline level. Second, the flat pattern in 75D was evaluated to be the worst in 27 items among total 46 items for the evaluation of outer appearance in the draping and flat pattern of 75A and 75D. Third, regardless of size, the draping was evaluated to be more suitable in the areas related to neck, arm hole, and waist dart than the flat pattern. These results are suggesting that the draping is a method of reflecting characteristic of the body type more accurately than the flat pattern, and that the draping is a more suitable method than the flat pattern for the design of clothing pattern of the body type with big breast like 75D.

• The International Journal of Costume Culture
• /
• 제8권2호
• /
• pp.97-104
• /
• 2005

In this research, the fit of basic dresses was examined, by analyzing and comparing the satisfaction of fitness of basic dresses made by the draping method on a custom-made replica body form and that of a basic dress made by the flat pattern method. Basis dresses were produced by the draping method for each 52 subjects using custom-made body forms, and another kind basic dresses for each subjects were produced by the flat pattern method using measurements of body sizes. Both basic dresses received high scores for the satisfaction of fit, but the basic dresses produced by draping method received higher scores. Thus it is expected to produce a more successful fit by draping a basic dress on a custom-made body form. Future research using more subjects might confirm these results. A more concrete analysis through using additional satisfaction tests could be conducted. For example, each subject might also serve as an evaluator to rate her satisfaction of fit wearing each of the two custom-made dresses. Finally, examining various body forms is suggested.

• 한국의류학회지
• /
• 제15권3호
• /
• pp.309-320
• /
• 1991

The purpose of this study was to develope a pattern drafting method for various somatotype which contribute largely to increase the fitness and comfort of garments. This study had 8 subjects who were college girls who had prominent somatic characteristics. The study was carried out by the following procedures. 1. The 8 subjects who had prominent somatic characteristics were cheesed by photograph- ing. The somatotypes of 8 subjects were classified into Standard somatotype, Turning over somatotype, Bending somatotype and Turning over-Bending somatotype. 2. Under the criterion of the body surface development, the comparative investigation on the pattern and the sensory evaluation were accomplished in the flat pattern method and the draping pattern method. 3. The body surface development of them were made by the draping pattern method. 4. In the result of the comparative investigation and the sensory evaluation, it was found that the flat pattern had better appearance and comfort than the draping pattern, and the draping pattern included more somatic characteristics than the flat pattern. 5. On the basis of those result, the pattern drafting method according to the somatotype was indicated and it was examinated by the clothing experiment. 6. The sensory evaluation for appearance and comfort was applied to evaluate the new basic pattern for four somatotype by comparing it with the conventional basic pattern (Rim, won ja' 5). The result of the sensory evaluation, it was found that the new basic pattern was more suitable for each somatotype than the conventional basic pattern.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.399-403
• /
• 2004

대학에서 의류학과 교육은 그 목적에 따라 다양하나 의복구성은 의복제작과정을 이해하는데 필요한 것으로 의복디자인분야 부터 품질관리에 이르기까지 기본과목으로 되어있다. 의복제작은 인체의 이해에 따른 기본원형의 설계로 시작된다. 기본원형은 활용이 다양하여 모든 종목의 의복 패턴 제작이 가능해야 한다. 또한 각 인체 치수에 맞는 사이즈를 등급화하여 초보자라도 누구나 활용할 수 있는 기본원형을 설계하는 것이 필요하다. 따라서 본 연구는 20대 초반의 대학생을 대상으로 입체재단 방법에 의한 기본원형을 제작하여 등급별로 표준화된 치수를 산출하고 연구된 평면재단 방법에 의한 길의 기본원형을 비교 검정하여 적합성을 비교하였다. 석고법에 의하여 제작된 인체모형에서 드레이핑된 기본원형과 연구된 평면재단 방법에 의한 기본원형을 비교 검정한 결과 5단계로 치수를 등급화 하였다. 착장평가 결과 다양한 체형에 만족힌 결과를 얻어 의복구성을 시작하는 초보자들에게 활용하여 교육할 수 있으리라 기대한다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.191-194
• /
• 2000

In this study, experimental verification of performance of flat speaker has been conducted. The piezofilm (PVDF) actuator has been designed to prevent the distortion of sound and make the frequency response of radiated sound flat. The electrode pattern of piezofilm actuator is optimized to satisfy the design objective. The formulation of design method is based on the coupled finite element and boundary element method and electrode pattern is optimized by genetic algorithm. The flat speaker with optimized piezofilm actuator has been manufactured. The sound pressure level at the distance of 50cm is measured using microphone and compared with the result of numerical simulation.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1849-1858
• /
• 2004

For examining friction-factor characteristics of round-hole pattern surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. The measurement method of leakage and pressure distribution along round-hole pattern specimen with different hole area is described and a method for determining the Fanning friction factor is discussed. Results show that the round-hole pattern surfaces provide a much larger friction factor than smooth surface, and the friction factor vs. clearance behavior yields that the friction factor generally decreases as the clearance increases unlike the results of Nava's flat plate test. As the hole depth is decreased, the friction factor is increased, and maximum friction factor is obtained for 50% of hole area. Since the present experimental friction factor results show coincident characteristics with Moody's friction factor model, empirical friction factors for round-hole pattern surfaces are obtained by using the Moody's formula based on curve-fit of the experimental data. Results of Villasmil's 2D CFD simulation support the present experimental test result.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.946-957
• /
• 2003

This study aimed to suggest a simple and well-fitting flat pattern drafting method for a men's jacket. Four jackets in thick muslin were made from four different drafting methods utilizing a few measures as breast girth, center back length, and chest width, which were not much different from the drafting methods of woman's jacket. The appearance of the 4 jackets was evaluated by a pool of evaluators consisted of graduate students who had much clothing construction teaching experiences and their motion adaptability was evaluated by two wearers who belonged within the range of the average measures of the Korean male figure as reported from the 1997's Census for Standard Body Measure. A drafting method evaluated as the most well-fitting and well-functioning in general was chosen and modified to enhance the appearance and was reevaluated to confirm its fit improvement. As a result of this study, a new drafting method, simple and not much different from that of a woman's jacket pattern drafting method is proposed. Since this method is based on the minimal measures and ratios thereof, and is not as complicated as ordinary drafting methods for men's wear, the researcher expects that this drafting method allows more chances for the students to learn and understand men's wear more easily and comfortably.

• 한국멀티미디어학회논문지
• /
• 제18권3호
• /
• pp.312-322
• /
• 2015

In this paper a new defect detection method for flat panel display that does not require any separately prepared reference images and shows robustness against problems with regard to pixel tolerance and nonuniform illumination condition is proposed. In order to perform defect detection under any magnification value of camera, the proposed method automatically obtains the value of pattern interval through an image analysis. Using the information for pattern interval, an advanced PCSR-G method presented in this paper utilizes neighboring patterns as its reference images instead of utilizing any separately prepared reference images. Also this paper proposes a scheme to improve the performance of the conventional PCSR-G method by extracting and applying additional information for pixel tolerance and intensity distribution considering the value of pattern interval. Simulation results show that the performance of the proposed method utilizing pixel tolerance and intensity distribution is superior to that of the conventional method. Also, it is proved that the proposed method that is implemented using parallel technique based on GPGPU can be applied to real system.

• 천문학논총
• /
• 제23권2호
• /
• pp.47-52
• /
• 2008

We have performed the flat-fielding correction for the $H{\alpha}$ full-disk monitoring system of KASI (Korea Astronomy and Space Science Institute), which is installed in the Solar Flare Telescope (SOFT) at the top of Bohyun Mountain. For this, we used a new method developed by Chae (2004), to determine the flat pattern from a set of relatively shifted images. Using this method, we successfully obtained the flat pattern for $H{\alpha}$ full-disk observations and compared our result with the image observed in Catania Astrophysical Observatory. The method that we used in this study seems to be quite powerful to obtain the flat image for solar observations. In near future, we will apply this method for the flat-fielding correction of all solar imaging instruments in KASI.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.950-955
• /
• 2003

The fluid propulsion mechanism of two oscillating flat plates is studied numerically using a discrete vortex method. Presently, the flat plates are assumed to be rigid. To analyze the closely coupled aerodynamic interference between the flat plates, a core addition scheme and a vortex core model are combined together. A calculated wake pattern for a flat plate in heaving oscillation motion is compared with the flow visualization. The effect of wake shapes on the aerodynamic characteristics of the flat plate in pitching oscillation is investigated. The velocity profiles behind the flat plates in pitching oscillations are plotted to investigate the possible thrust generation mechanism.