• The KSFM Journal of Fluid Machinery
• /
• v.7 no.1 s.22
• /
• pp.45-50
• /
• 2004

Two phenomena often encountered in liquid flow, which were completely absent in gas or vapor flow, were cavitation and flashing. These phenomena were of significant interest in any comprehensive discussion of control valves or contracted devices since their occurrence would affect the device sizing procedures, might introduce noise and vibration, and also may limit the life expectancy of device components and the immediate downstream piping. Thus, this study aimed to find the reduction method of occurred cavitation in system by the computer simulation. A derivative six model with different dimensions of cavity were adopted. From the results, it was found that the length of the cavity was mote important factor to reduce the pressure drop over the control valves or contracted devices than the depth of the cavity. And the pressures along the centerline of the contracted devices were dropped two times in the case of haying the large length (Lc=1.5D) of cavity.

• Corrosion Science and Technology
• /
• v.12 no.3
• /
• pp.142-148
• /
• 2013

Safety is a major concern in Nuclear Power Plants (NPPs). Piping systems in NPPs are very complex and composed of many components such as tees, elbows, expanders and straight pipes. The high pressure and high temperature water flows inside piping components. As high speed water flows inside piping, the pipe wall thinning occurs in various reasons such as FAC (Flow Accelerated Corrosion), LDIE (Liquid Droplet Impingement Erosion) and Flashing. To inspect the wall thinning phenomenon and protect the piping from damages, piping components are checked by UT measurement in every overhaul. During every overhaul, approximately 200~300 components (40,000~60,000 UT data) are examined in NPPs. There are some methods from EPRI for evaluating wear rate of components. However, only few studies have been conducted to find out the raw data reliability for the wear rate evaluation. Securing the reliable raw data is the key factor for a reasonable evaluation. This paper suggests the reliability analysis method for the repeatedly measured data for wear rate evaluation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.44-47
• /
• 1988

The present experiments of transient temperature variation and temperature fluctuation were conducted by bead type thermistors in pool boiling without a heat surface. The experimentally obtained conclusion were as follows. (1) The high transient temperature Variatian of 11.64.deg. C for a duration of 0.08 sec and a temperature freguency having a duration of 5.6*10$^{-2}$ sec in a flashing were measured. (2) The highest variation of transient temperature was shown at saturated temperature of 80.deg. C and superheat of 7.9.deg. C. (3) Temperature frequency was found to increase with superheat below 60.deg. C of saturated temperature, but above 60.deg. C it was relative to lower superheat and was found to decrease with higher superheat..

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1147-1152
• /
• 2010

This paper reports a safe and environmentally-benign demilitarization method for the K305 35mm CS gas grenades launcher set(also known as E-8 launcher). The launcher system was disposed by a two-step process; complete recovery of the explosive cords and the gas grenades from the launcher followed by incineration of the recovered items in the APE-1236 Flashing Furnace. All of the 64 grenades within the 16 tubes of the E-8 launcher were safely recovered and incinerated. In this study, 32 sets of the launcher were used to make a standard operating procedure for the safe demilitarization of the launcher system and the 35mm CS cartridges were all safely destroyed in the experimental burning tests meeting the related environmental regulations.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.44-53
• /
• 2007

A three-dimensional (3D) unstructured hydrodynamic solver for transient two-phase flows has been developed for a 3D component of a nuclear system code and a component-scale analysis tool. A two-fluid three-field model is used for the two-phase flows. The three fields represent a continuous liquid, an entrained liquid, and a vapour field. An unstructured grid is adopted for realistic simulations of the flows in a complicated geometry. The semi-implicit ICE (Implicit Continuous-fluid Eulerian) numerical scheme has been applied to the unstructured non-staggered grid. This paper presents the numerical method and the preliminary results of the calculations. The results show that the modified numerical scheme is robust and predicts the phase change and the flow transitions due to boiling and flashing very well.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.177-182
• /
• 1999

감압증발의 효율을 향상시키기 위한 방법으로 액주내의 기포생성에 의한 자기 미립화를 수반하는 과열액분류의 증발을 분사 감압증발이라고 하며, 특히 적절한 방법으로 액체내에 기포핵을 공급하는 경우에는 매우 좋은 증발성능이 얻어 진다는 것이 보고되어 있다. 따라서 본 연구에서는 온배수를 감압증발시켜 저온저압의 증기를 제조하여 MVR로부터 승온승압에 의해 고온의 증기를 얻기위한 것이 연구의 목적이므로, 증발효율향상을 위해 기포핵 공급용 전해전류장치를 설치하고, 감압증발용의 노즐을 원통형 튜브로 대체하기위해 튜브형 노즐로 부터 과열액을 급격히 감압시켜 자기미립화에 의한 증발을 유도하여 전해전류가 증발효율에 미치는 영향을 실험적으로 연구하고자 작동액체로써 물을 사용하고, 액체온도, 액체유량, 과열도 및 기포핵 공급용의 전해전류량을 변화시켜 실험을 수행하였다.(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.32-38
• /
• 2010

Laser material processing technology is adopted in several industry as alternative process which could overcome weakness and problems of present adopted process, especially semiconductor and display industry. In semiconductor industry, laser photo lithography is doing at front-end level, and cutting, drilling, and marking technology for both wafer and EMC mold package is adopted. Laser cleaning and de-flashing are new rising technology. There are 3 kinds of main display industry which use laser technology - TFT LCD, AMOLED, Touch screen. Laser glass cutting, laser marking, laser direct patterning, laser annealing, laser repairing, laser frit sealing are major application in display industry.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.97-102
• /
• 2019

As the number of "Mobility Handicapped" increases, the incidence of "Mobility Handicapped" traffic accidents is also increasing. In order to reduce the incidence of traffic accidents in the "Mobility Handicapped", a service providing system for "Mobility Handicapped" is required. Since these services have different data formats, data heterogeneity occurs. Therefore, the system should resolve the data heterogeneity by mapping the format of the data. In this paper, we design DBaaS as a mobility handicapped system for data interoperability. This system provides a service to extend the flashing time of the traffic lights according to the condition of "Mobility Handicapped" on the occurrence of a fall or a crosswalk in a crosswalk where there is a risk of a traffic accident. These services can reduce the incidence of traffic accidents in "Mobility Handicapped".

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.322-336
• /
• 2021

This paper presents a numerical prediction of the transient hydraulic loads acting on the tubes and external supports of a pressurized water reactor (PWR) steam generator (SG) during blowdown following a sudden feedwater line break (FWLB). A simplified SG model was used to easily demonstrate the prediction. The blowdown discharge flow was treated as a flashing flow to realistically simulate the transient flow fields inside the SG and the connected broken feedwater pipe. The effects of the SG initial pressure or the broken feedwater pipe length on the intensities or magnitudes of transient hydraulic loads were investigated. Then predictions of the decompression pressure wave-induced impulsive pressure differential loads on SG tubes and the transient blowdown loads on SG external supports were demonstrated and the general aspects of transient responses of such transient hydraulic loads to the FWLB were discussed.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.151-162
• /
• 2005

Variable Message Sign (VMS), which provides drivers with direct information about state of traffic congestion and for prevent an accident, is the most effective method among the methods of providing information in Advanced Transportation Management System. Currently establishment and the VMS which is operated foundation lets in Guidelines on the use of Variable message sign (a book of the VMS) of 1999 November the Ministry Construction & Transportation, these contents mean main viewpoint on physical part such as message special quality variable (font, character size and line space, word interval) and position mainly among standard about establishment in general. But, it is true that using without effect verification on the character of VMS display and that using mode of stationary-centered. In this paper, it executed significance test to effort verification on the character of VMS display for more practical and effective information transmission based on the driver viewpoint For the researches; develop 3D-Simulation, select characteristics of driver's visual cognition behavior (the conspicuity, the legibility and the comprehensibility), evaluation each issue (day or night, 80km/h or 100km/h). Especially, that used the Eye Marker Recorder to measure of reading-time (legibility) thus, confirmed objectivity and reduce an observational error. The results showed that the conspicuity is Flashing> Stationary>Scroll. The legibility is not deference that Flashing between stationary form. Also the comprehensibility result showed that Flashing> Stationary>Stroll form.