• 한국유체기계학회 논문집
• /
• 제7권1호
• /
• pp.45-50
• /
• 2004

Two phenomena often encountered in liquid flow, which were completely absent in gas or vapor flow, were cavitation and flashing. These phenomena were of significant interest in any comprehensive discussion of control valves or contracted devices since their occurrence would affect the device sizing procedures, might introduce noise and vibration, and also may limit the life expectancy of device components and the immediate downstream piping. Thus, this study aimed to find the reduction method of occurred cavitation in system by the computer simulation. A derivative six model with different dimensions of cavity were adopted. From the results, it was found that the length of the cavity was mote important factor to reduce the pressure drop over the control valves or contracted devices than the depth of the cavity. And the pressures along the centerline of the contracted devices were dropped two times in the case of haying the large length (Lc=1.5D) of cavity.

• Corrosion Science and Technology
• /
• 제12권3호
• /
• pp.142-148
• /
• 2013

Safety is a major concern in Nuclear Power Plants (NPPs). Piping systems in NPPs are very complex and composed of many components such as tees, elbows, expanders and straight pipes. The high pressure and high temperature water flows inside piping components. As high speed water flows inside piping, the pipe wall thinning occurs in various reasons such as FAC (Flow Accelerated Corrosion), LDIE (Liquid Droplet Impingement Erosion) and Flashing. To inspect the wall thinning phenomenon and protect the piping from damages, piping components are checked by UT measurement in every overhaul. During every overhaul, approximately 200~300 components (40,000~60,000 UT data) are examined in NPPs. There are some methods from EPRI for evaluating wear rate of components. However, only few studies have been conducted to find out the raw data reliability for the wear rate evaluation. Securing the reliable raw data is the key factor for a reasonable evaluation. This paper suggests the reliability analysis method for the repeatedly measured data for wear rate evaluation.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.44-47
• /
• 1988

본 실험에서는 온도측정용 써미스터인 고감도의 비드형 써미니스터를 이용하여 물의 감압증발에 의한 불등식 푸울내의 깊이 방향과 반경방향의 온도변화를 연속적으로 측정하여 연구한 결과를 보고한다.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1147-1152
• /
• 2010

This paper reports a safe and environmentally-benign demilitarization method for the K305 35mm CS gas grenades launcher set(also known as E-8 launcher). The launcher system was disposed by a two-step process; complete recovery of the explosive cords and the gas grenades from the launcher followed by incineration of the recovered items in the APE-1236 Flashing Furnace. All of the 64 grenades within the 16 tubes of the E-8 launcher were safely recovered and incinerated. In this study, 32 sets of the launcher were used to make a standard operating procedure for the safe demilitarization of the launcher system and the 35mm CS cartridges were all safely destroyed in the experimental burning tests meeting the related environmental regulations.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.44-53
• /
• 2007

A three-dimensional (3D) unstructured hydrodynamic solver for transient two-phase flows has been developed for a 3D component of a nuclear system code and a component-scale analysis tool. A two-fluid three-field model is used for the two-phase flows. The three fields represent a continuous liquid, an entrained liquid, and a vapour field. An unstructured grid is adopted for realistic simulations of the flows in a complicated geometry. The semi-implicit ICE (Implicit Continuous-fluid Eulerian) numerical scheme has been applied to the unstructured non-staggered grid. This paper presents the numerical method and the preliminary results of the calculations. The results show that the modified numerical scheme is robust and predicts the phase change and the flow transitions due to boiling and flashing very well.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.177-182
• /
• 1999

감압증발의 효율을 향상시키기 위한 방법으로 액주내의 기포생성에 의한 자기 미립화를 수반하는 과열액분류의 증발을 분사 감압증발이라고 하며, 특히 적절한 방법으로 액체내에 기포핵을 공급하는 경우에는 매우 좋은 증발성능이 얻어 진다는 것이 보고되어 있다. 따라서 본 연구에서는 온배수를 감압증발시켜 저온저압의 증기를 제조하여 MVR로부터 승온승압에 의해 고온의 증기를 얻기위한 것이 연구의 목적이므로, 증발효율향상을 위해 기포핵 공급용 전해전류장치를 설치하고, 감압증발용의 노즐을 원통형 튜브로 대체하기위해 튜브형 노즐로 부터 과열액을 급격히 감압시켜 자기미립화에 의한 증발을 유도하여 전해전류가 증발효율에 미치는 영향을 실험적으로 연구하고자 작동액체로써 물을 사용하고, 액체온도, 액체유량, 과열도 및 기포핵 공급용의 전해전류량을 변화시켜 실험을 수행하였다.(중략)

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.32-38
• /
• 2010

Laser material processing technology is adopted in several industry as alternative process which could overcome weakness and problems of present adopted process, especially semiconductor and display industry. In semiconductor industry, laser photo lithography is doing at front-end level, and cutting, drilling, and marking technology for both wafer and EMC mold package is adopted. Laser cleaning and de-flashing are new rising technology. There are 3 kinds of main display industry which use laser technology - TFT LCD, AMOLED, Touch screen. Laser glass cutting, laser marking, laser direct patterning, laser annealing, laser repairing, laser frit sealing are major application in display industry.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권1호
• /
• pp.97-102
• /
• 2019

As the number of "Mobility Handicapped" increases, the incidence of "Mobility Handicapped" traffic accidents is also increasing. In order to reduce the incidence of traffic accidents in the "Mobility Handicapped", a service providing system for "Mobility Handicapped" is required. Since these services have different data formats, data heterogeneity occurs. Therefore, the system should resolve the data heterogeneity by mapping the format of the data. In this paper, we design DBaaS as a mobility handicapped system for data interoperability. This system provides a service to extend the flashing time of the traffic lights according to the condition of "Mobility Handicapped" on the occurrence of a fall or a crosswalk in a crosswalk where there is a risk of a traffic accident. These services can reduce the incidence of traffic accidents in "Mobility Handicapped".

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.322-336
• /
• 2021

This paper presents a numerical prediction of the transient hydraulic loads acting on the tubes and external supports of a pressurized water reactor (PWR) steam generator (SG) during blowdown following a sudden feedwater line break (FWLB). A simplified SG model was used to easily demonstrate the prediction. The blowdown discharge flow was treated as a flashing flow to realistically simulate the transient flow fields inside the SG and the connected broken feedwater pipe. The effects of the SG initial pressure or the broken feedwater pipe length on the intensities or magnitudes of transient hydraulic loads were investigated. Then predictions of the decompression pressure wave-induced impulsive pressure differential loads on SG tubes and the transient blowdown loads on SG external supports were demonstrated and the general aspects of transient responses of such transient hydraulic loads to the FWLB were discussed.

• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.151-162
• /
• 2005

도로전광표지(VMS, Variable Message Sign)는 $\lceil$도로의 구조 시설에 관한 규칙$\rfloor$제 38조에 의하여 설치하는 교통관리 시설로서 도로교통의 원활한 소통과 안전을 도모하고 교통사고를 방지하기 위한 사전정보 제공을 위한 부속시설이다. 현재 ITS 산업이 활성화 되여 VMS의 기술적 요소가 발달을 거듭하면서, 보다 질적인 정보제공을 위하여 표출방식을 달리 하여 제공하고자 하는 노력이 여기저기서 시도되고는 있다. 그러나 표출방식별 효과에 대한 검증없이 사용되고 있거나 아직까지는 고정식(Stationary)위주의 표출방식만이 제한적으로 사용되고 있어 그 효과를 백분 활용하지 못하고 있는 것이 사실이다. 이에 본 연구에서는 정보를 인지하고 판단하는 운전자 관점에서 보다 실용적이고 효과적인 정보 전달을 위한 방안의 기초연구로서 인지반응 특성요소를 효과척도로 활용하여 표출방식간 유의성 검증을 실시하였다. 이를 위하여 3D-시뮬레이션을 개발하여 보다 객관적인 비교실험을 수행하였다. 표출방식 간 비교변수로는 VMS의 요구조건이자 운전자 인지특성을 대변할 수 있는 현저성, 판독성, 이해성으로 선정하여, 한 표출방식에 대한 각각에 특성실험을 동시에 수행하였다. 뿐만 아니라 기존의 인지 특성변수로 채택된 판독시간의 실험에 대한 피실험자의 측정오차를 줄이기 위하여 초점기록계(Eye Marker Recorder)를 이용하여 실험함으로서 보다 정량적이면서도 객관적인 판독시간을 측정할 수 있었다. 각각의 측정 변수들에 대한 표출방식간 유의성을 검증하기 위하여 각 변수의 데이터 범주에 맞도록 현저성은 교차분석으로, 판독성과 이해성은 분산분석으로 검토하였다. 그 결과 현저성은 플래쉬>고정식${\neq}>$스크롤 방식 순으로 유의미한 차이를 나타냈으며, 판독성은 고정식과 플래쉬 방식의 차이는 없었고 스크롤 방식의 경우만이 유의미한 차이로 판독시간이 증가함을 알 수 있었다. 또 이해성에 있어서 플래쉬>고정식>스크롤 방식 순으로 나타나 전체의 결과를 종합하여 볼 때 플래쉬 방식의 성능이 우수함을 알 수 있었다.