목적: 각종 기계 부품에 주로 사용되는 9% Ni 합금강의 고온 크리프 시험과 그 시편들의 파단면을 관찰하고 Larson-Miller 변수를 적용하여 상수 C값을 결정하여 합금강의 수명을 예측하는데 있다. 방법: 본 시험의 장치는 Andrade와 F. Garofalo 등이 고안한 레버-빔 형으로 제작되었고, 크리프시험 설정조건은 시험편에 미치는 영향을 알아보기 위하여 4가지의 온도조건과 4가지 응력조건을 설정하여 16가지의 조건 하에서 시험을 실시하였다. 결과: 크리프 시험온도가 증가함에 따라 크리프 변형에 따른 응력의 멱지수(n)는 3.97에서 3.55로 점진적으로 감소하는 경향을 보였다. 크리프 변형의 활성화에너지는 응력이 증가함에 따라 90.39에서 83.64 kcal/mol로 점진적으로 감소하였다. Larson-Miller 변수의 계산에 의한 상수 C값은 약 22로 계산되었으며, 사용온도가 제시되면 그 수명을 예측할 수 있다. 파단면의 SEM 측정결과 저온과 고온의 경우는 입내파단에 의한 취성파괴 현상이 나타났으며, 중간정도 온도영역에서는 입계파단에 의한 연성파괴현상이 나타났으며, 일부에서는 딤풀현상도 나타났다. 결론: 9% Ni 합금강에 대한 고온 크리프시험과 그 시편들의 파단면을 관찰한 결과를 제시하여 그 파괴현상을 분석함으로써 설비분야의 부품활용에 대한 기초설계 자료를 구축하여 장비의 수명예측에 유용하게 응용될 수 있다.
The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.
Huh, Man Woo;Yoon, Jong Ho;Cho, Yong Suk;Kim, Young Suk;Lim, Hak Sang
한국염색가공학회지
/
제8권2호
/
pp.25-34
/
1996
Diphenyl ethanolamidophosphate(DPEAD) was synthesized for the purpose of developing a new flame retardant for cotton fabric. As the intermediate material was used diphenyl chlorophosphate(DPCP) and it was synthesized by using phosphorus oxychloride and phenol as the starting materials. The final product DPEAP was obtained by the reaction of DPCP and ethanolamine. The flame retardancy of cotton fabrics treated by DPEAP through pad-dry-cure(PDC) process was examined at various conditions. The physical property change of the DPEAP treated cotton fabrics were investigated by examining the drape stiffness, the wrinkle recovery, and the tensile strength. The results are summarized as follows: (1) DPEAP has shown excellent flame retardancy on cotton fabrics in comparison to other flame retardants for cotton fabrics available commercially. (2) The optimal condition for PDC process found was that the curing temperature was 16$0^{\circ}C$, the DPEAP concentration was 10%, the catalyst $({NH_{4})_{2}HPO_{4}$ concentration was 7.0%, and the fixing agent hexamethylol melamine (HMM)/DPEAP weight ratio was 1/8. (3) The wrinkle recovery of the processed fabrics increased with increasing DPEAP concentration. (4) The drape stiffness of the cotton fabrics treated by DPEAP have shown essentially no change until increasing DPEAP concentration to 15 %, however DPEAP concentration exceeds 20% the drape stiffness increased drastically with increasing DPEAP concentration. When DPEAP concentration is kept constant the drape stiffness increased with increasing $({NH_{4})_{2}HPO_{4}$ concentration and HMM/DPEAP weight ratio. (5) The tensile strength of the processed fabrics was lower than that of untreated fabrics, but the tensile strength retention increased with increasing DPEAP concentration.
The operation condition of recently designed pistons for high power and high speed diesel engine become more severe due to the increment of combustion pressure and temperature. So, in order to overcome high temperature, the application of the mono-metal cast aluminum alloy piston featuring an enclosed cast-in open cooling gallery has increased. In this research, it is developed a PCJ (piston cooling jet) rig tester, described the test procedure and validated the performance of sample piston cooling gallery design. Then the test rig will be used for developing the design technology of piston cooling gallery. The test rig is composed with oil reservoir and pumping system, oil jet system, piston fixing and moving system, collecting oil measuring system, and data measuring and recording system. It will be measured collecting efficiencies under conditions of a few piston positions, oil jet pressures and oil viscosities for a piston cooling gallery. Furthermore, the PCJ rig tester will be used for the optimum design of the oil cooling gallery which being applied to increase the cooling efficiency of pistons in diesel engines satisfying the EURO V emission regulation and the more.
모사추진제로 초저온 액체질소와 기체 질소를 사용하여 핀틀의 개도 및 모사추진제 공급 조건이 초저온 분무에 끼치는 영향을 정성적으로 연구하였다. 액체 공급압력을 고정하고, 핀틀의 개도와 기체 질소의 공급 압력을 변화시켜 실험을 진행하였다. 이미지 가시화는 CCD 카메라를 이용한 Shadowgraph 기법이 사용되었으며, 이미지 후처리를 통해 실험 조건에 따른 분무의 차이를 비교하였다. 액체 질소 단독 분사의 경우 개도가 늘어날 때, 분사속도가 줄어들고 챔버에서의 벤트 압력은 커져 액체질소 시트가 중앙으로 모이는 현상이 관측되었다. 액체질소/기체질소 분무의 경우 이미지 후처리를 통해 서로 실험 조건이 다르지만 Shadowgraph 이미지가 유사하게 나타나는 경우도 분석할 수 있음을 보였다.
본 논문에서는 Fe가 0.015Wt.%도핑된 LiNbO₃ 결정에서 2광파혼합(TWM:Two-Wave Mixing)을 통한 입사각에 따른 결합계수, 기록빔의 세기비에 따른 이득, 회절효율, 시간응답특성에 대한 해석 및 실험을 통해 고밀도 광메모리 소자로서 응용하기 위한 특성을 제시한다. 실험결과 514.5nm 파장에서 본 결정의 경우 14°에서 최대 결합특성을 보였고 이때의 최대결합계수는 6.9cm/sup -1/이다. 그리고, 632.8nm 파장의 빔으로 판독시 두 결합빔의 세기비가 0.1이고, 입사각이 140 일 때, 54.13%의 최대 회절효율을 얻었으며, 격자고정시 회절효율은 21.4% 이다. 또한, Fe-LiNbO₃ 결정을 높은 회절효율을 갖는 광메모리 소자로 적용하기 위해 가장 우수한 회절특성을 보이는 조건에서 각도 다중화 방식과 공간 광학 변조기를 이용한 광정보 저장응용실험 결과를 제시하였다.
곤약의 제조 공정은 크게 분말제조과정, 응고과정 및 제성과정으로 나눌 수 있었다. 곤약의 일반세균수는 응고제와 침지액의 농도가 높아질수록 뚜렷한 감소 경향을 나타낸 반면 용수의 온도는 유의미한 영향을 미치지 못하였다. 곤약의 저장성 실험에서 응고제[Ca(OH)2] 농도를 1.0%로 유지할 경우 인장강도는 10개월까지 큰 변화 없이 유지되는 것으로 나타났으나 0.8% 이하로 유지할 경우 급격한 감소를 나타내는 경향을 보였다. 일반세균수도 인장강도의 변화와 유사한 패턴을 보였다. 응고제 농도를 1.0%로 고정한 후 침지액에 의한 영향을 확인한 결과 시험된 모든 침지액 농도(4×10-3-1.2×10-2 N)에서 인장강도와 일반세균수 모두 저장 10개월까지 큰 변화없이 유지되는 것으로 나타났다. 이는 곤약의 저장시 응고제의 농도가 결정적 영향을 미치는 것을 의미하는 것으로 상온에서 응고제의 농도를 1.0% 이상 유지할 경우 침지액의 농도에 상관없이 상온에서 10개월 동안 물성을 유지할 수 있다는 것을 의미한다.
For some Korean newsprint mill, addition level of aluminum sulfate has been reduced because sulfur from aluminum sulfate has detrimental effect on the efficiency of anaerobic water treatment. At this moment, an unexpected decrease in sizing degree of TMP mixed newspaper was occurred. The phenomena means that hydrophobic substance usually originated from TMP cannot be fixed on the paper. This study focused on effect of alum and PAC on sizing of paper and contamination. Also, substitutability of PAC was discussed as a possible alternatives of aluminum sulfate under anaerobic condition of water treatment. Evaluation of sizing degree and pitch deposit potential were performed at the varied addition level of PAC and aluminum sulfate. Hydrophobic substance mainly derived from TMP could be fixed on the surface of fiber by PAC. Fines retention was not changed by replacing aluminum sulfate with PAC. Additionally, fixing of hydrophobic substance without excessive agglomeration can be enhanced by PAC with low molecular weight. Consequently, sizing degree of newspaper and contamination of recycling process of ONP can be controlled by low molecular weighted PAC.
These experiments investigated the conditioning pattern and the nitrification efficiency of a fluidized sand biofilter (FSB) for seawater application. The FSB fed artificial nutrient was fully conditioned within 22 weeks. The maximum nitrification efficiency of the FSB was achieved at a superficial water velocity (SWV) of 1.0 cm/sec. After fixing the superficial water velocity at 1.0 cm/sec, the nitrification rates of the FSB were assessed at 3 total ammonia nitrogen (TAN) loading rates (250, 500, 1,000 g TAN/$m^3$/day) and 3 water temperatures (12, 16, $20^{\circ}C$). The TAN concentration in the simulated culture tank ranged from 2.87 to 9.72 mg/L at TAN loading rate of 1,000 g TAN/$m^3$/day, while that ranged from 0.45 to 1.26 mg/L at TAN loading rate of 500 g TAN/$m^3$/day. The ranges of TAN concentration in the former were too high for aquatic organisms and those in the latter were acceptable. Therefore, the safe TAN loading rate for the FSB in seawater conditions was decided as 500 g TA/$m^3$/day. From these results, daily TAN removal rates (g TAN/$m^3$/day) of FSB under conditions of inlet TAN concentration (C, mg/L) and water temperature (T, $^{\circ}C$) were calculated by the following non-linear multi-regression equation: TAN removal rate: f(z)=-1,311.295+655.714LnT+225.775LnC ($r^2=0.962$).
본 연구는 에너지 변환을 가하면 피부에 기능별 투과와 전달현상의 변화를 확인한다. 주어진 에너지의 변화로 피부에 진행되는 과정과 에너지 전달에 투과조절의 단계로 흐르는 과정을 구성하고, 알고리즘을 통하여 변화의 과정을 모델링한다. 에너지양의 조절과 과정의 처리를 모델링한 상태에서 피부의 표피 진피에 효과적 단계로 자동 조절 및 국부 조절을 통한 시스템 모델을 구성하였다. 에너지 변환에 따른 고정된 위치와 계획된 장치로 재현하는 에너지 조절기능이 크기 형태 조합을 변환시키는 모형으로인한 깊이에 따른 분포의 변화가 정확하게 얻어지도록 투과펄스시스템을 구성하였다. 따라서 효율적인 에너지 변환을 제어하는 전달시스템을 구성하기위해 변환모델을 세분화하여 구축하였다. 이를 통하여 피부효과에 기능적 에너지 조절이 가능한 투과 조절시스템이 구성되어 지속적인 피부의 개선효과가 진행 될 것으로 예상된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.