• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.105-114
• /
• 2008

In this study, the sizing and performance analysis program is developed for the canard rotor wing(CRW) aircraft which operates in dual modes (fixed wing mode and rotary wing mode). The developed program is verified for both fixed wing and rotary wing modes using the existing aircraft data and the design optimization formulation is made to perform the reconnaissance mission. For the canard rotor wing aircraft optimization , multi-objective function is constructed to consider both the fixed wing mode and rotary wing mode the weighting factor. For six design cases with different weighting factors and different design constraints, the optimization is performed and improved rotor design results are derived.

• Advances in aircraft and spacecraft science
• /
• v.4 no.1
• /
• pp.65-80
• /
• 2017

Small aircrafts, Unmanned Aerial Vehicles (UAVs), are used especially for military purposes. Because landing fields are limited in rural and hilly places, take-off or landing distances are very important. In order to achieve a short landing or take-off distance many parameters have to be considered, for instance the design of aircrafts. Hence this paper represents a better design to enlarge the use of fixed wing aircrafts. The document is based on a live and simulated experiments. The various components of designed aircraft are enhanced to create short take-off distance, greater lift and airflow without the need for proper runway area. Therefore, created aerodynamics of the remotely piloted aircraft made it possible to use fixed wing aircrafts in rural areas.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.2
• /
• pp.59-70
• /
• 2004

Most of studies on aircraft accidents have been conducted mainly for fixed-wing aircraft, while the studies on helicopter accidents have been done less even though the helicopter accidents occurred quite more than those of the fixed-wing. There are lots of differences between helicopter and fixed-wing accidents, in aspect of causes and occurrence of accidents as well as aerodynamics and operation. In Korea, helicopter accidents have occurred 2 or 3 times annually since 2000, while the number of fixed-wing aircraft accidents has been reduced considerably. The goal of this study is to solve the present safety problems in helicopter accidents by reviewing the characteristics of past accidents and comparing differences between two types of aircraft.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.408-415
• /
• 2019

Basically the dynamics of the fixed-wing aircraft is based on the airspeed which is relative to the wind, but when it comes to the track guidance and control, ground speed is the factor to be considered. Especially in the case of low-speed fixed-wing unmanned aerial vehicles the difference between the airspeed and the ground speed is significant depending on wind conditions, so that the heading control and the course control have to be designed separately. This paper represents the course control method using the pre-designed heading control gains which meet the desired characteristics. Also, waypoint guidance and control algorithms are suggested applying this control method. Finally the robustness of the proposed method is confirmed by 6-DoF nonlinear simulation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.122-128
• /
• 2018

A compound drone that combines a fixed wing and a rotary wing is an aircraft that can take off and landing vertically, and can increase flight time and fly faster with fixed wings. The compound drones are divided into many types depending on the method of adding the thrust vectoring or the lift fan and the position of the rotor. In this study, we designed and fabricated a composite drone with four V-TOL motors in a fixed-wing, and assigned missions to the aviation body, hence judged mission accuracy using the actual flight test. The design process and the mission evaluation process employed in this study can be utilized on the development of various unmanned aerial vehicle.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.46-53
• /
• 2007

In this paper, a guidance law for vision-based automatic landing of unmanned aerial vehicles (UAVs) is proposed. Automatic landing is a challenging but crucial capability for UAVs to achieve a fully autonomous flight. In an autonomous landing maneuver of UAVs, the decision of where to landing and the generation of guidance command to achieve a successful landing are very significant problem. This paper is focused on the design of guidance law applicable to automatic landing problem of fixed-wing UAV and rotary-wing UAV, simultaneously. The proposed guidance law generates acceleration command as a control input which derived from a specified time-to-go ($t_go$) polynomial function. The coefficient of $t_go$-polynomial function are determined to satisfy some terminal constraints. Nonlinear simulation results using a fixed-wing and rotary-wing UAV models are presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.22-31
• /
• 2005

A design study was conducted for a new concept aircraft(Canard Rotor/Wing: CRW) that has the capability of dual mode flight, a rotorcraft and a fixed wing mode. The CRW can show a vertical take off/landing and a high speed/efficiency cruise performance simultaneously. It is not surprising to develop a new sizing code for this class of aircraft because conventional sizing codes developed solely for either the rotary wing or the fixed wing aircraft are not adequate to design a dual mode aircraft operated both by the rotary wing through tip jet effux and the fixed wing lift. Thus, a new design code was developed based on the conventional sizing code by adding some features including rotor performance, duct flow, and engine flow analysis, hence could eventually predict the performance of reaction driven rotor, the flight performance and the flight characteristics. The various design parameters were investigated to find their influences on the flight performance then, a small UAV(Unmanned Aircraft Vehicle) of 1500 lbs class was optimally designed to have minimum weight using the developed sizing code.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.215-218
• /
• 2003

In this study, a performance model of the Smart UAV propulsion system with ducts, tip jets and variable main nozzle, which has flight capability of the rotary wing mode for the take-off/landing and low speed forward flight as well as the fixed wing mode for high speed forward flight, has been newly developed. With the proposed model, steady-state performance analysis was performed at various flight modes and conditions, such as rotary wing mode, fixed wing mode, compound wing, mode altitude and flight speed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.159-164
• /
• 2014

These days, inexpensive and high efficiency UAV of disaster prevention and spatial information has been given more attention. But studies about test of accuracy of UAV were not enough despite high interest. This research produced DSM and ortho photo and estimated accuracy by comparing coordinates with GNSS survey to evaluate outcome of fixed wing UAV. The ortho photo was found to make use of it to update 1/1,000 map. This research investigated spatial information construction using existing terrestrial LiDAR to suggest effectiveness of fixed wing UAV.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.499-507
• /
• 2019

Despite the well-known mathematical model of fixed-wing aircraft, there are various studies to meet desired performances by considering the modeling errors in the extended flight envelope. This paper proposes a new adaptation mechanism of model-reference adaptive control, which applies the Levenberg-Marquardt algorithm to the pitch attitude control of fixed-wing UAV. In addition, reference model in the adaptation law is set by referring to the dynamic properties of the plant model. The performance of the proposed adaptive control law is verified through simulations and flight tests.