• 한국소프트웨어감정평가학회 논문지
• /
• 제14권1호
• /
• pp.9-17
• /
• 2018

기업과 개인 여러 방면에서 오픈소스 SW의 사용과 중요성은 날이 갈수록 증가하고 있다. 그러나 사용자를 위한 소프트웨어 서비스인 소프트웨어 평가, 추천, 필터링들의 기반 연구인 소프트웨어 분류에 대해서 오픈소스 SW의 특성에 맞게 유연하게 대처하지 못하고 고정된 분류 체계를 사용하고 있다. 본 연구에서는 오픈소스 SW를 대상으로 분류에 대한 조사와 새로운 오픈소스 SW 범주에 대해서 유연하게 대처할 수 있는 머신러닝 기반의 오픈소스 카테고리 분류 모델에 대해 제안한다.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.109-112
• /
• 2003

In real time packetized voice applications, missing frames is a major source of voice quality degradation. Thus packet loss concealment(PLC) algorithms are needed to guarantee the QoS of the VoIP. Still current speech codecs for VoIP work poor when consecutive packet losses are issued. In this paper, we proposed a new PLC algorithm for the G.729 codec. Our algorithm works better especially when the consecutive packet loss occurs mainly because it adopts an adaptive gain controller utilizing the number of missing packet information combined with a fixed codebook vector estimation algorithm and LPC bandwidth expansion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.340-346
• /
• 2013

This paper describes a helicopter vibration induced by main rotor in forward flight. The hub loads in the fixed frame, which are dominant source of helicopter vibration, are obtained by multi-blade summation of rotating blades loadings. The components of 3/rev, 4/rev, and 5/rev blades loadings are transmitted by blades to 4/rev hub loads in the fixed frame. The vertical vibrations of helicopter at pilot seat and copilot seat are calculated through rigid body transfer functions considering airframe to be rigid body. The blades are assumed to be elastic and undergo the flap, lag, and torsion motion and free wake aerodynamic model is used to calculate the precise blade loadings in the analysis. The 4/rev vertical vibration responses are analyzed from rotating blade loadings and fixed hub loadings.

• 한국통신학회논문지
• /
• 제33권12A호
• /
• pp.1138-1146
• /
• 2008

This paper considers 2-hop wireless cooperative communications networks with fixed decode-and-forward relays. Specifically, we first derive the closed-form BER expression for theoretically evaluating the end-to-end performance of these networks. Then, based on this expression and long-tenn fading statistics, we propose a power allocation method for source and relay. Such a method brings about multiple advantages in tenn of spectral efficiency and implementation complexity over other power allocation methods based on instantaneous fading statistics. A variety of numerical results reveal that the cooperative communications scheme with the proposed power allocation significantly outperforms that with the equal power allocation and the direct transmission scheme for any position of the relay subject to the same total transmit power constraint.

• 대한의용생체공학회:의공학회지
• /
• 제28권1호
• /
• pp.95-101
• /
• 2007

Recently, small-animal imaging technology has been rapidly developed for longitudinal screening of laboratory animals such as mice and rats. One of newly developed imaging modalities for small animals is an x-ray micro-CT (computed tomography). We have developed two types of x-ray micro-CT systems for small animal imaging. Both systems use flat-panel x-ray detectors and micro-focus x-ray sources to obtain high spatial resolution of $10{\mu}m$. In spite of the relatively large field-of-view (FOV) of flat-panel detectors, the spatial resolution in the whole-body imaging of rats should be sacrificed down to the order of $100{\mu}m$ due to the limited number of x-ray detector pixels. Though the spatial resolution of cone-beam CTs can be improved by moving an object toward an x-ray source, the FOV should be reduced and the object size is also limited. To overcome the limitation of the object size and resolution, we introduce zoom-in micro-tomography for high-resolution imaging of a local region-of-interest (ROI) inside a large object. For zoom-in imaging, we use two kinds of projection data in combination, one from a full FOV scan of the whole object and the other from a limited FOV scan of the ROI. Both of our micro-CT systems have zoom-in micro-tomography capability. One of both is a micro-CT system with a fixed gantry mounted with an x-ray source and a detector. An imaged object is laid on a rotating table between a source and a detector. The other micro-CT system has a rotating gantry with a fixed object table, which makes whole scans without rotating an object. In this paper, we report the results of in vivo small animal study using the developed micro-CTs.

• 대한조선학회지
• /
• 제27권4호
• /
• pp.32-42
• /
• 1990

선체표면 및 자유표면에 Rankine Source를 분포하는 방법에 의하여 선체 주위의 유동의 수치계산을 수행하였다. 선체표면 및 자유표면은 사각형 Panel들로 표시되며 자유표면 조건은 이중모형 흐름에 의해 선형화 되어 C.W. Dawson의 유한차분법에 따라 교란없는 자유표면에 적용되었다. Wigley 선형 및 Series 60, $C_B=0.6$ 선형에 대한 Fixed Condition에서의 조파저항, 선측파고, 압력분포 및 Trim & Sinkage 등을 계산하였으며 계산된 결과는 국내외 수조에서의 계측치와 비교하였다. 또한, 선체표면과 자유표면의 Panel 분할조건 및 자유표면의 설정영역의 변화에 따른 계산치의 영향도 아울러 조사하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.483-489
• /
• 2009

The Time Difference of Arrival (TDOA) algorithm is being used widely for identifying the location of a source emanating either electrical or acoustic signal. It's application areas will not be limited to identifying the source at a fixed location, for example the origin of an earthquake, but will also include the trajectory monitoring for a moving source equipped with a GPS sensor. Most of the TDOA algorithm uses time correlation technique to find the time delay between received signals, and therefore difficult to be used for identifying the location of multiple sources. In this paper a TDOA algorithm based on cross-spectrum is developed to find the trajectory of two sound sources with different frequencies. Although its application is limited to for the sources on a disk plane, but it can be applied for identifying the locations of more than two sources simultaneously.

• 방송공학회논문지
• /
• 제8권2호
• /
• pp.163-171
• /
• 2003

고정 및 이동수신환경에서 결합 소스/채널 부호화 기법을 MPEG-4(Moving picture Experts Group) 비디오 전송에 적용하여 대역폭 사용 효율을 높이는 방안에 대하여 논하였다. 채널환경은 랜덤잡음환경과 이동수신환경을 고려하였다. 소스부호화기는 MPEG-4 비디오, 채널부호화기는 RCPC(Rate Compatible Punctured Convolution) 그리고 변조방식은 QPSK(Quadrature Phase Shift Keying)를 적용하였다. 이 논문에서는 여러가지 채널상태(Es/No)에 따른 율-왜곡특성에 대해 분석하여 소스비트율과 채널부호율 간에 최적의 상충점(Trade-off point)을 결정하였고, 결합 소스/채널 부호화 기법과 일반적인 고정부호율 전송기법을 비교하여 결합 소스/채널부호화의 효율성을 보였다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.445-453
• /
• 2016

Fixed robust routing is attracting attention as routing that achieves high robustness against changes in traffic patterns without conducting traffic measurement and performing dynamic route changes. Fixed robust routing minimizes the worst-case maximum link load by distributing traffic of every source-destination (s-d) router pair onto multiple candidate paths (multipath routing). Multipath routing, however, can result in performance degradation of Transmission Control Protocol (TCP) because of frequent out-of-order packet arrivals. In this paper, we first investigate the influence of multipath routing on TCP performance under fixed robust routing with a simulation using ns-2. The simulation results clarify that TCP throughput greatly degrades with multipath routing. We next propose a candidate path selection method to improve TCP throughput while suppressing the worst-case maximum link load to less than the allowed level under fixed robust routing. The method selects a single candidate path for each of a predetermined ratio of s-d router pairs in order to avoid TCP performance degradation, and it selects multiple candidate paths for each of the other router pairs in order to suppress the worst-case maximum link load. Numerical examples show that, provided the worst-case maximum link load is less than 1.0, our proposed method achieves about six times the TCP throughput as the original fixed robust routing.

• Safety and Health at Work
• /
• 제2권2호
• /
• pp.148-157
• /
• 2011

Objectives: Although compensation for occupational injuries and diseases is guaranteed in almost all nations, countries vary greatly with respect to how they organize workers' compensation systems. In this paper, we focus on three aspects of workers' compensation insurance in Organization for Economic Cooperation and Development (OECD) countries - types of systems, employers' funding mechanisms, and coverage for injured workers - and their impacts on the actual frequencies of occupational injuries and diseases. Methods: We estimated a panel data fixed effect model with cross-country OECD and International Labor Organization data. We controlled for country fixed effects, relevant aggregate variables, and dummy variables representing the occupational accidents data source. Results: First, the use of a private insurance system is found to lower the occupational accidents. Second, the use of risk-based pricing for the payment of employer raises the occupational injuries and diseases. Finally, the wider the coverage of injured workers is, the less frequent the workplace accidents are. Conclusion: Private insurance system, fixed flat rate employers' funding mechanism, and higher coverage of compensation scheme are significantly and positively correlated with lower level of occupational accidents compared with the public insurance system, risk-based funding system, and lower coverage of compensation scheme.