• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.1-5
• /
• 2015

In this paper, we propose the optical system design for a medium sized LED marine lanterns which simplifies the multi-layer structure into a single structure. In order to satisfy the target fixed intensity(35,000cd) and vertical divergence($-2.5^{\circ}{\sim}-4.0^{\circ}$, $+2.5^{\circ}{\sim}+4.0^{\circ}$), we use the total internal reflection collimator lens. And a Monte Carlo simulation has been utilized to optimize a condition of a LED package, TIR lens and outside lens. The computer simulation results indicated that this LED marine lanterns can produce of a fixed intensity(35,382cd) and vertical divergence($-3.1^{\circ}{\sim}+2.5^{\circ}$). Using the this optical system, we achieve the target value of LED lanterns.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1186-1195
• /
• 1993

The Japanese type combine harvester has adopted rubber crawlers for the driving mechanism from first production . However, combine harvesters with movable track rollers in the rubber crawler system have been adopted recently for the purpose of stability at the time of climbing over the footpaths between rice fields, as the results of the machines becoming large. However, the dynamic characteristics of movable track rollers have not been clarified. For this reason, the design of movable track rollers depends on trial and errors. It is known that vibration characteristics of the vehicle with movable track rollers are different from the vibration characteristics of the vehicles with fixed track rollers even though the track roller arrangements are the same. Therefore, the theoretical analyses of movable track rollers must be hurried in order to formulate a reasonable track roller arrangement design. the authors have studied the vibration characteristics of the rubber crawler ve icle with fixed track rollers. in this study, the dynamic model of the vehicle with movable track roller sis compared with the dynamic model of the vehicle with fixed track rollers. Next, motions are simulated to analyze the movable track rollers by expanding the motion equation which were constructed for the dynamic model of the fixed track rollers.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.4
• /
• pp.286-290
• /
• 2018

PURPOSE. Conventional resin-bonded fixed partial dentures (RBFPDs) are usually made with a two-retainer design. Unlike conventional RBFPDs, cantilever resin-bonded fixed partial dentures (Cantilever RBFPDs) are, for their part, made with a single-retainer design. The aim of this study was to compare the effect of tooth surface preparation on the bond strength of zirconia cantilever single-retainer RBFPDs. The objective is to evaluate the shear bond strength of these single-retainer RBFPDs bonded on 3 different amount of tooth surface preparation. MATERIALS AND METHODS. Thirty extracted bovine incisors were categorized to 3 groups (n=10), with different amounts of tooth surface preparations. Teeth were restored with single-retainer RBFPDs with different retainer surfaces: large retainer of $32mm^2$; medium retainer of $22mm^2$; no retainer and only a proximal connecting box of $12mm^2$. All RBFPDs were made of zirconia and were bonded using an adhesive system without adhesive capacity. Shear forces were applied to these restorations until debonding. RESULTS. Mean shear bond strength values for the groups I, II, and II were $2.39{\pm}0.53MPa$, $3.13{\pm}0.69MPa$, and $5.40{\pm}0.96MPa$, respectively. Statistical analyses were performed using a one-way ANOVA test with Bonferroni post-hoc test, at a significance level of 0.001. Failure modes were observed and showed a 100% adhesive fracture. CONCLUSION. It can be concluded that the preparation of large tooth surface preparation might be irrelevant. For zirconia single-retainer RBFPD, only the preparation of a proximal connecting box seems to be a reliable and minimally invasive approach. The differences are statistically significant.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.246-254
• /
• 2016

Nowadays, 3 dimentional (3D) printing, especially Direct Metal Laser Sintering (DMLS) system is used in dentistry. DMLS system has recently been introduced for fabrication metal framework for metal ceramic crowns to overcome the disadvantages of the casting method and computer aided design/computer aided manufacturing (CAD/CAM) milling system. DMLS system uses a high-temperature laser beam to selectively heat a substructure metal powder based on the CAD data with the framework design. A thin layer of the beamed area becomes fused, and the metal framework is completed by laminating these thin layers. Utilizing DMLS system to fabricate fixed prostheses is expected to achieve free-from shaping without mold and limitations from cutting tools, fabricate prostheses with complex geometry, prevent distortion and fabrication defects that inherent to conventional fabrication methods. The purpose of this case report is to demonstrate various fixed prostheses such as long span fixed prostheses, post to achieve satisfactory results in functional and esthetic aspects.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.35-42
• /
• 2020

The accurate prediction of fire detector activation time is required to ensure the reliability of fire modeling during the safety assessment of performance-based fire safety design. The main objective of this study is to determine the activation temperature and the response time index (RTI) of a fixed heat detector, which are the main input factors of a fixed-temperature heat detector applied to the fire dynamics simulator (FDS), a typical fire model. Therefore, a fire detector evaluator, which is a fire detector experimental apparatus, was applied, and 10 types of domestic fixed-temperature heat detectors were selected through a product recognition survey. It was found that there were significant differences in the activation temperature and RTI among the detectors. Additionally, the detector activation time of the FDS with the measured DB can be predicted more accurately. Finally, the DB of the activation temperature and RTI of the fixed-temperature heat detectors with reliability was provided.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.206-212
• /
• 2006

Design programs of tube-sheet for heat exchanger based on the related engineering society codes have been widely used. But it is not easy fer beginners to use the design programs. So we need to develop an easy program for design of tube-sheet for heat exchanger. This paper describes a developed design-program of tube-sheet fur heat exchanger. The developed program was coded on boiler theory and pressure vessel codes, provided by TEMA(Tubular Exchanger Manufactures Association) and ASME(American Society of Mechanical Engineers). Visual Basic, which is convenient for beginners to deal with, was used in the programming. Also a finite element analysis of tube-sheet for heat exchanger was carried to verify this developed program by using a commercial software, ANSYS. In the finite element analysis, tube and tube-sheet of heat exchanger were substituted by solid plate having equivalent properties for convenience of calculation. The thickness of tube-sheet obtained by the developed design-program was in good agreement with that of tube-sheet by FEA.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.78-86
• /
• 2015

Nowadays, there has been a trend about drinking coffee due to remarkable expansion of market, but the market is occupied by less franchise cafes having a lot of branches, and small private cafes are just few percentage. On other aspects, there will be a good effect of more active economy when private cafes are more active through this domestic situation of market which has the high rate of private business. Therefore, it is necessary to research design of fasade and especially fixed features on private cafes located in Busan Jeonpo cafe street by maketing of sensibility. firstly, there is the analysis about trends and features of fixed factors, and secondly, there is deep analysis about structural. and decorated factors. Furthermore, as a result of the analysis of similarities and differences, the variations in the design of private cafe will be understanded. whenever structural and decorated factors are balanced, for the design is more worthy, there will be formed basis of analysis in trends. In addition, the basic data research which includes anaysis and comparisons in structural and decorative factors will be used to improve appropriate design.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.427-427
• /
• 2015

The storm water management and drainage relation are the key variable that plays a vital role on hydrological design and risk analysis. These require knowledge about spatial variability over a specified area. Generally, design rainfall values are expressed from the fixed point rainfall, which is depth at a specific location. Concurrently, determine the areal rainfall amount is also very important. Therefore, a spatial rainfall interpolation (point rainfall converting to areal rainfall) can be solved by areal reduction factor (ARF) estimation. In mainland of South Korea, for dam design and its operation, public safety, other surface water projects concerned about ARF for extreme hydrological events. In spite of the long term average rainfall (2,061 mm) and increasing extreme rainfall events, ARF estimation is also essential for Jeju Island's water control structures. To meet up this purpose, five fixed rainfall stations of automatic weather stations (AWS) near the "Hancheon Stream Watershed" area has been considered and more than 50 years of high quality rainfall data have been analyzed for estimating design rainfall. The relationship approach for the 24 hour design storm is assessed based on ARF. Furthermore, this presentation will provide an outline of ARF standards that can be used to assist the decision makers and water resources engineers for other streams of Jeju Island.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.22-31
• /
• 2005

A design study was conducted for a new concept aircraft(Canard Rotor/Wing: CRW) that has the capability of dual mode flight, a rotorcraft and a fixed wing mode. The CRW can show a vertical take off/landing and a high speed/efficiency cruise performance simultaneously. It is not surprising to develop a new sizing code for this class of aircraft because conventional sizing codes developed solely for either the rotary wing or the fixed wing aircraft are not adequate to design a dual mode aircraft operated both by the rotary wing through tip jet effux and the fixed wing lift. Thus, a new design code was developed based on the conventional sizing code by adding some features including rotor performance, duct flow, and engine flow analysis, hence could eventually predict the performance of reaction driven rotor, the flight performance and the flight characteristics. The various design parameters were investigated to find their influences on the flight performance then, a small UAV(Unmanned Aircraft Vehicle) of 1500 lbs class was optimally designed to have minimum weight using the developed sizing code.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.151-159
• /
• 2011

This study is to suggest versatile chair designs that are organically shaped to take individual orientation. This study intends to provide design method to ensure the face of the chair that contacts the body of its user is transformed flexibly to support the body. The movement of human body is not just a behavior but the ways and tools that reflexively express against external stimuli that are sensed and identified by the person. The versatile chair whose users' sitting position is fixed is made by covering the lump form with a piece of cloth ensuring that the content is firmly fixed and by placing the beads-woven wood fabric according to the shape. And then, it is covered with the external cover. The proposed versatile chair designs assume specific forms as follows: First, it is a versatile chair whose user's sitting position can fix. The organically-shaped form that can accept varying postures is made as a mass, which changes into different shapes when human body touches the form so that users can lie down or sit. Due to such transformation, body posture is determined and individual differences in shape changing are all acceptable. Second, it is a versatile chair that reflects the user's position in a fixed chair, where a cloth-wrapper feature is applied to the form a sifit wrapped postures so that a variety of body postures can be accepted. Finally, a versatile chair that reflects the user's position by changing the shape of is covered with forms so that it will be transformed and used in accordance with situations and chair shapes and reflect multiple shapes including round or square ones.