• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.415-418
• /
• 2005

DSP chip parameters of a digital hearing aid (HA) should be optimally selected or fitted for hearing impaired persons. The more precise parameter fitting guarantees the better compensation of the hearing loss (HL). Digital HAs adopt DSP chips for more precise fitting of various HL threshold curve patterns. A specific DSP chip such as Gennum GB3211 was designed and manufactured in order to match up to about 4.7 billion different possible HL cases with combination of 7 limited parameters. This paper deals with a digital HA fitting program which is developed for optimal fitting of GB3211 DSP chip parameters. The fitting program has completed feature from audiogram input to DSP chip interface. The compensation effects of the microphone and the receiver are also included. The paper shows some application examples.

• 한국유체기계학회 논문집
• /
• 제6권4호
• /
• pp.29-37
• /
• 2003

This study was undertaken to verify the effect of flow coefficient when a globe control valve was attached by different type of fitting. The valve flow coefficient is usually determined by measuring the flow rate and the pressure drop with the connection of straight pipe through the valve. The effect of different fitting that is mounted on the downstream of the valve is studied. Four types of fittings and three distances between the valve and a downstream fitting are compared parametrically to investigate the effect on the flow coefficient of it. Measured flow coefficient and numerically predicted value by using computational fluid dynamics were compared in detail. It is concluded that the flow coefficient is reduced if the fitting is attached after a valve, but the effect of different type of fitting is not crucial.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1842-1847
• /
• 2007

In this study, we are to analyze the life and the main failure mode of flexible tubes fitting for pneumatic that are usually applied in the factory automation line. Flexible tubes fitting for pneumatic have complicated failure cause because they are organized as a complex of various elements. Therefore, in this paper, we analyzed the main failure mode of flexible tubes fitting for pneumatic, and then performed life test and performance test according to the international standards. On the basis of these processes, we estimate shape parameter that is the main factor for the calculation of test time for the reliability of flexible tubes fitting for pneumatic and their data analysis of life distribution.

• 대한수학회논문집
• /
• 제17권1호
• /
• pp.121-142
• /
• 2002

We are interested in the curve fitting problems in such a way that the sum of the squares of the orthogonal distances to the given data points is minimized. Especially, the fitting an ellipse to the given data points is a problem that arises in many application areas, e.g. computer graphics, coordinate metrology, etc. In [1] the problem of fitting ellipses was considered and numerically solved with general purpose methods. In this paper we present another new ellipse fitting algorithm. Our algorithm if mainly based on the steepest descent procedure with the view of ensuring the convergence of the corresponding quadratic function Q(u) to a local minimum. Numerical examples are given.

• 전자공학회논문지A
• /
• 제32A권10호
• /
• pp.102-110
• /
• 1995

This paper describes a development of the PLD design tool in considering with a device fitting. To design digital circuit with PLDs, several steps in the developed PLD design tool are needed such as Boolean description step, pin map step, FUSE map and JEDEC steps ... etc. Especially, we have considered the device fitting to design large digital circuits with PLDs developed the device fitting algorithms based on the PLD device fitting and compared with the results of a another PLD design tool(PALASM). Also, we have proved that the developed PLD design tool is successfully implemented by the connection with a PLD writer(ALL-07), in the case of design digital circuits.

• 한국CDE학회논문집
• /
• 제9권3호
• /
• pp.183-191
• /
• 2004

This paper deals with smooth curve fitting of data corrupt by noise. Most research efforts have been concentrated on employing the smoothness penalty function with the estimation of its optimal parameter in order to avoid the 'overfilling and underfitting' dilemma in noisy data fitting problems. Our approach, called DBSF(Differentiation-Based Smooth Fitting), is different from the above-mentioned method. The main idea is that optimal functions approximately estimating the derivative of noisy curve data are generated first using genetic programming, and then their integral values are evaluated and used to recover the original curve form. To show the effectiveness of this approach, DBSP is demonstrated by presenting two illustrative examples and the application of estimating the principal dimensions of bulk cargo ships in the conceptual design stage.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.338-347
• /
• 2006

연직차수벽은 오염지역이나 폐기물 매립장에서 오염된 지하수 (때로는 오염된 수증기) 흐름을 차단하거나 또는 오염지역의 정화처리시 효율을 높이기 위하여 외부로부터 지하수 흐름을 막기 위해 설치된다. 이 논문에서는 연직차수벽의 가장 중요한 설계요소인 차수벽체의 현장 투수성을 평가하는 방법들중 가장 보편적으로 사용되는 단공식 순간 변위시험 (slug test)을 소개한다. 연직차수벽에서 실행된 단공식 순간 변위시험 결과를 해석하기 위해서, 연직차수벽의 압축성과 기하학적인 특성을 고려한 수정된 linear curve fitting 방법을 제안하고 그 적용성을 case study를 통해 평가한다. 기존의 대수층 투수계수 산정에 이용된 curve fitting 방법들에 비하여 수정된 linear curve fitting 방법은 보다 정확한 연직차수벽체의 투수성을 평가하도록 한다.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.769-776
• /
• 2006

A measured frequency response function can be represented as a ratio of two polynomials. A curve-fitting of frequency responses with Legendre polynomialis suggested in the paper. And the suggested curve-fitting algorithm is based on the least-square error method. Since the Legendre polynomials satisfy the orthogonality condition, the curve-fitting with the polynomials results to more reliable curve-fitting than ordinary polynomial method. Though the proposed curve-fitting with Legendre polynomials cannot cover all frequency range of interest, example shows that the suggested method is quite applicable in a limited frequency band.

• 한국의류학회지
• /
• 제45권6호
• /
• pp.986-1003
• /
• 2021

This study was conducted to develop a basic pants pattern reflecting the average body shape of Chinese women in their 20s by using a virtual fitting method. A formula for the research pattern was derived by applying the measured value based on the drafting method of existing patterns. The final pattern was presented through two actual fitting processes. The suitability of the final pattern was then verified through a functional evaluation and an appearance evaluation based on an actual fitting and a virtual fitting. As a result of the evaluations, the final pattern reflected the body shape of Chinese women in their 20s and was evaluated as a higher quality pattern compared to existing patterns. The final pattern was based on the omphalion waist circumference. Ease amounts were set to be the omphalion waist circumference + 1.0 cm, hip circumference + 2.0 cm, and the pants length was set to 94 cm.

• Advances in Computational Design
• /
• 제7권1호
• /
• pp.37-56
• /
• 2022

Phase-type distributions are the distributions of the time to absorption in finite and absorbing Markov chains. They generalize, while at the same time, retain the tractability of the exponential distributions and their family. They are widely used as stochastic models from queuing theory, reliability, dependability, and forecasting, to computer networks, security, and computational design. The ability to fit phase-type distributions to intractable or empirical distributions is, therefore, highly desirable for many practical purposes. Many methods and tools currently exist for this fitting problem. In this paper, we present the results of our investigation on using orthogonal-distance fitting as a method for fitting phase-type distributions, together with a comparison to the currently existing fitting methods and tools.