목적 : 소프트 콘택트렌즈 착용자를 대상으로 착용실태 및 구입현황, 피팅 상태 확인 유무에 따른 자각적 증상, 그리고 베이스커브에 대한 소비자 인식도를 알아보고자 하였다. 방법 : 2018년 6월부터 8월까지 소프트 콘택트렌즈를 구매하기 위하여 서울소재의 안경원 및 렌즈샵에 방문한 사람들을 대상으로 설문조사를 시행하였으며, 총 98부를 분석에 이용하였다. 카이제곱 검정과 Fisher의 정확 검정을 이용하여 피팅 상태 확인(착용감과 관련된 문진, 푸시업 테스트 등) 유무에 따른 자각적 증상(건조함, 빛 번짐, 착용감 불편, 시력저하)을 비교하였으며, 로지스틱 회귀분석을 이용하여 오즈비를 구하였다. 결과 : 소프트 콘택트렌즈를 구입 시 시력검사를 받고 구입한 경우는 안경원은 86.6%, 렌즈샵은 64.7%이었다. 콘택트렌즈를 구입할 때 피팅 상태의 확인을 받지 않은 경우에는 피팅 상태의 확인을 받은 경우에 비해 건조함(오즈비 4.41, 95% 신뢰구간 1.25-15.62)과 착용감 불편(오즈비 2.68, 95% 신뢰구간 1.08-6.64)을 더 많이 경험하는 것으로 나타났다. 또한 콘택트렌즈 착용자의 87.8%가 베이스커브라는 용어를 알지 못하고 있었으며, 콘택트렌즈 구매 시 92.9%가 베이스커브와 관련된 설명을 듣지 못한 것으로 나타났고, 96.9%가 베이스커브 검사를 받은 경험이 없는 것으로 조사되었다. 결론 : 소프트 콘택트렌즈 처방 시 피팅 상태의 확인을 통한 적절한 베이스커브의 변경을 통해 기존 소비자들의 콘택트렌즈의 착용 시 만족도를 향상시켜야 할 것으로 생각된다.
일반적으로 완전 이식형 인공중이는 이식형 마이크로폰과 진동 트랜스듀서를 포함한 모든 구성 요소가 측두골 부근 피부 아래에 이식되는 보청기이다. 마이크로폰과 트랜스듀서의 경우 이식 전과 후의 동작 주파수 특성 등이 달라진다. 이러한 특성변화와 이식 대상자의 청력특성에 알맞은 보청기 동작을 수행하기 위해 적합과정을 수행하게 된다. 일반 공기전도형 보청기나 부분 이식형 보청기의 경우 적합을 위한 전선 연결부가 존재하나 완전이식형의 경우에는 몸속에 모두 이식됨으로 이러한 전선의 연결이 어려우며 이에 따라 기존 보청기의 적합 프로그램을 적용하는 하드웨어를 이용한 적합이 어렵다. 본 논문에서는 완전 이식형 인공중이를 위한 무선 적합 하드웨어에 적용 가능한 적합 소프트웨어를 설계 및 구현하였다. 구현한 적합 소프트웨어는 마이크로폰과 트랜스듀서의 특성과 난청자의 청력도를 반영하여 적절한 청력 보상치를 산출할 수 있다.
본 연구에서는 유사한 여러 물체들이 인접하여 나타나는 영상열로부터 물체들을 개별적으로 분리할 수 있는 B-spline 적합(fitting) 알고리즘을 제안한다. 기존의 스네이크(snake) 알고리즘들은 초기화의 어려움과 다수의 극점 존재로 인해서 이러한 영상자료에서 물체의 영역을 개별적으로 분리하는 데는 어려움이 있다. 본 연구에서는 이 문제를 극복하고 다양한 형태의 물체가 인접해 있는 유사한 물체들로부터 효과적으로 분할 할 수 있는 유전자(genetic) 알고리즘 기반 B-spline 적합방안을 제안한다. 실제 상황을 고려하여 생성된 영상자료와 실제 치아 CT 영상을 이용한 평가에서 제안된 방법은 서로 인접해 있는 유사한 형태와 자기의 물체들을 개별적으로 정확하게 분할할 수 있음을 보였다. 제안된 알고리즘의 결과는 이상적으로 추출된 영역과의 일치성과 false positive 오류 그리고 false negative오류가 계산되어 검증되었다.
The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.
In general industrial rotating machinery is operated under 3,600 rpm as rotating speed and designed to have critical speed that is above operating speed. So, there was no problem to operate rotating machine under critical speed. But nowadays, they should be operated more than the frist critical speed as usual with the trend of high speed, large scale and hish precision in industries. In case of the large rotor assembly as the trend of large scale, using fitting method of disk or cylinder on shaft is rising for the convenience of assembly and cutting down of manufacturing cost. The shrink fitting is used to assemble lamination part on shaft for manufacturing of rotor of motor or generator in many cases and also is widely used for other machinery. In rotating system, which is compose of rotor and bearing, the critical speed is determined from inertia and stiffness for the rotor and bearings. In case of fitting assembly, analysis and design of the rotor is not easy because the rotor stiffness is determined depend on a lot of factors such as shaft material/dimension, disk material/dimension and assembled interference etc. Therefore designer who makes a plan for hish-speed rotating machine should design that the critical speed is located out of operating range, as dangerous factors exist in it. In order to appropriate design, an accurate estimation of stiffness and damping is very important. The stiffness variation depend on fitting interference is a factor that changes critical speed and if it's possible to estimate it, that Is very useful to design rotor-bearing system. In this paper, the natural frequency variation of the rotor depends on fitting interference between basic shaft and cylinder is examined by experimentation. From the result, their correlation is evaluated quantitatively using numerical analysis that is introduced equivalent diameter end the calculation criteria is presented for designer who design fitting assembly to apply with ease for determination of appropriate interference.
Corona on polymer materials causes deterioration by the combined action of the discharge striking the surface and the action of certain chemical compounds that are formed by the discharges. In the design and manufacture of polymer insulators must be sufficiently large to avoid corona discharges, otherwise a shielding or corona ring (grading ring) needs to be installed on the insulator. To conduct this purpose, many researchers have investigated end-fitting of polymer insulator by voltage distribution simulation and electrical test. Grading rings are used to improve the performance of the insulator in multiple ways. They can reduce corona and associated audible noise and radio influence and television interference. The factors determining the uses of a grading ring are line voltage, geometry and dimensions of end fittings, geometry and dimensions of line hardware, and environmental conditions. In this paper, electrical property of polymer insulator with end-fitting design have been investigated by electrical field analysis, various end-fitting design, tracking wheel test, corona inception voltage and extinction voltage. Electrical field analysis is conducted by FEM program and various end-fitting is designed through this result. Designed end-fittings are manufactured and their performance is conducted by electrical performance test.
본 논문은 케이슨의 인양작업중 Fitting Anchor의 취성파괴로 인한 들고리의 붕괴원인을 조사하기 위한 실험적 연구이다. 또한, 본 연구에서는 응력해석을 통하여 들고리의 붕괴메카니즘을 분석하고 이를 실제 붕괴과정과 비교한다. 본 연구에서는 파괴된 강재에 대한 파면해석 뿐만아니라 화학성분시험, 인장시험 및 샤르피 V-노치 충격시험을 실시한다. 그리고 이의 시험 결과를 정상적인 강재에 대한 시험결과와 비교한다. 본 연구의 거시적, 미시적인 방법으로 결함을 관찰한 결과, Fitting Anchor 내부에 원주방향으로 나타난 표면결함은 케이슨의 진수시 발생하는 들고리의 인장응력이 작용하기 전에 발생한 것임을 확인할 수 있었다. 이는 균열선단의 응력집중이 발생하여 작용응력보다 큰 응력이 결함에 발생한 것임을 알 수 있다. 또한, 잠재한 결함의 크기가 임계값 이상으로 증가하여 본 연구대상 강재의 응력확대계수가 증가하였을 것으로 판단된다. 그래서 균열선단의 응력확대계수가 본 강재의 파괴인성보다 크게 되어 케이슨의 인양작업중에 취성파괴를 일으킨 것으로 사료된다. 본 연구결과에 따르면 케이슨 들고리의 붕괴는 Fitting Anchor의 취성파괴로 발생한 것으로 사료된다.
목적: 지수감소곡선을 이용하여 착색렌즈에서의 착색시간과 시감투과율 사이의 관계를 대표할 수 있는 실험적 맞춤곡선(empirical fitting curve)을 도출한다. 방법: CR-39 렌즈와 6가지 색상의 염료를 이용하여 총 90개의 착색렌즈를 제조하였고, 실험적 맞춤곡선을 구하기 위한 시험곡선(trial curve)으로서 단일(single), 2중(double) 및 3중(triple) 지수감소곡선(exponential decay curve)을 이용한다. 결과: 최적의 실험적 맞춤곡선은 3중 지수감속곡선인 것으로 밝혀졌다. 결론: 착색시간에 따른 시감투과율의 변화를 대표하는 적절한 실험적 맞춤곡선으로서 3중 지수감소곡선을 제안한다.
목적: 진단적 피팅법으로 우안에는 얼라인먼트 상태보다 1 D 플랫한 피팅의 RGP 콘택트렌즈를, 좌안에는 얼라인먼트 피팅의 RGP 콘택트렌즈를 착용시켜 2개월 후 착용 전 후의 각막 굴절력을 비교하고 선호도를 조사 하였다. 방법: 각막형상의 변화가 없는 경우를 대상으로 하기위해 콘택트렌즈를 처음 착용하면서 안질환이나 안과적 수술경험이 없으며 눈물양이 정상인 서울시내 중.고등학생 20명, 40안을 대상으로 RGP 콘택트렌즈 착용전의 각막 굴절력을 검사하고 10일 후 적응여부 검사와 각막 상태 검사를 통해 지속적인 착용여부를 확인한 뒤 하루 평균 8시간 이상을 착용시키고 2개월 후 각막 굴절력을 검사하여 비교 분석하였다. 결과: 얼라인먼트 상태보다 1 D 플랫한 피팅 렌즈를 착용한 우안의 2개월 후 각막중심 굴절력은 $43.84{\pm}1.33D$, 플랫 K 도수는 $43.05{\pm}1.29D$, 스티프 K 도수는 $44.61{\pm}1.42D$로 착용 전의 각막중심 굴절력보다 감소하여 변화량이 컸다(p<0.001, 0.001, 0.047). 양주경선의 편심률(e-value) 또한 변화량이 많았다(p = 0.037, 0.015). 얼라인먼트 피팅 렌즈를 착용한 좌안의 착용 2개월 후 각막 중심 굴절력은 $44.40{\pm}1.26D$, 플랫 K 도수는 $43.57{\pm}1.23D$, 플랫 K e-value는 $0.58{\pm}0.05$로 통계학적으로 유의한 차이가 없었다(p = 0.769, 0.614, 0.181). 그러나 스티프 K 굴절력은 $45.25{\pm}1.36$, 스티프 K e-value는 $0.45{\pm}0.18$로 통계학적으로 유의한 차이를 보였다(p = 0.018, 0.027). 결론: 렌즈 편안한 착용감, 선명한 시력, 눈의 건조감의 항목을 종합하여 선호 피팅법을 조사하였을 때 우안 얼라인먼트 상태보다 1 D 플랫한 피팅 렌즈를 선택한 사람이 6명(30%), 좌안 얼라인먼트 피팅 렌즈를 선택한 사람이 14명(70%)으로 좌안 얼라인먼트 피팅 렌즈를 선택한 착용자가 많았다. RGP 렌즈의 피팅은 정확한 검사를 요구하며 환자의 각막에 적합한 얼라인먼트 피팅을 처방하여야 한다.
목적: 소프트렌즈를 얼라인먼트(alignment) 피팅 또는 스팁(steep) 피팅하였을 때 각막에서의 렌즈의 회전 움직임, 순목에 의한 이동거리 및 중심위치가 정상안과 건성안에서 어떠한 차이를 보이는지 알아보고자 하였다. 방법: 20~30대 남녀 40안을 정상안군과 건성안군으로 분류한 후 polymacon 재질의 소프트렌즈를 얼라인먼트 피팅 혹은 스팁피팅상태로 착용시키고 렌즈 착용 직후 및 눈물층이 안정화 되었을 때의 회전 움직임, 순목에 의한 이동거리, 중심위치를 비교하였다. 결과: 렌즈의 회전 움직임은 스팁하게 피팅하였을 경우 정상안 군은 얼라인먼트 피팅시와 큰 차이를 보이지 않았으나, 건성안 군에서는 눈물층이 안정화되는 시점에서의 평균 회전 움직임이 정상안 군보다 통계적으로 유의하게 컸다. 정상안 군에서는 피팅에 따른 렌즈 이동거리의 차이가 없었으나 건성안 군에서는 스팁하게 피팅된 경우 렌즈의 이동 거리가 증가하였다. 각막에서의 렌즈 중심 위치는 얼라인먼트 피팅된 렌즈를 착용한 정상안 군의 경우 수직 방향으로의 분포가 더 컸으나 건성안의 경우는 수평 방향으로의 분포가 더 컸다. 또한 건성안에 렌즈를 스팁하게 피팅하였을 때에는 렌즈를 착용한 직후 렌즈의 중심 위치가 수직방향으로도 다소 넓게 분포하였으며 눈물층이 안정화된 후에는 오히려 수평 방향의 분포가 좁아져 눈물층의 안정화에 따라 렌즈의 중심 위치가 변함을 알 수 있었다. 결론: 본 연구를 통하여 건성안에서의 소프트렌즈의 움직임과 중심 위치가 정상안의 경우와 상이하며 특히 스팁 피팅시에는 그 차이가 더 두드러짐을 알 수 있었다. 따라서 건성안에 소프트렌즈를 피팅할 시에는 본 연구를 통하여 확인할 수 있었던 정상안과의 차이를 고려해야 할 것으로 생각된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.