• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.552-554
• /
• 1999

포논산란과 임팩트이온화 모델은 풀밴드 모델과 페르미 황금법칙을 이용한 고에너지 영역에서 hot carrier 전송을 해석하기 위해서 제시되어 왔다. 본 연구에서는 77K와 300k에서 실제에너지 밴드 구조를 이용한 Si의 임팩트이온화 과정에 대해서 온도 의존성을 조사했다. 풀밴드 모델은 local form factors을 이용한 의사포텐셜방법에서 얻어지고, 산란율 계산에 이용된다. 정확한 임팩트이온화율 계산은 파동벡터와 주파수에 의존하는 유전함수를 필요로 한다. 포논 산란율은 상태밀도에 선형적으로 의존하기 때문에 포논산란율과 상태밀도의 비에 대한 선형함수 유도에 의해서 구해진다 임팩트이온화율 $P_{ii}$ 는 first principle's theory로부터 계산되어지고, 수정된 Keldysh 공식에 의해서 최적화되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.130-135
• /
• 2008

An aerodynamic optimization design process of multistage axial turbine is presented in this article: first, applying quasi-three dimensional(Q3D) design methods to conduct preliminary design and then adopting modern optimization design methods to implement multistage local optimization. Quasi-three dimensional(Q3D) design methods, which mainly refer to S2 flow surface direct problem calculation, adopt the S2 flow surface direct problem calculation program of Harbin Institute of Technology. Multistage local optimization adopts the software of Numeca/Design3D, which jointly adopts genetic algorithm and artificial neural network. The major principle of the methodology is that the successive design evaluation is performed by using an artificial neural network instead of a flow solver and the genetic algorithms may be used in an efficient way. Flow computation applies three-dimensional viscosity Navier Stokes(N-S) equation solver. Such optimization process has three features: (i) local optimization based on aerodynamic performance of every cascade; (ii) several times of optimizations being performed to every cascade; and (iii) alternate use of coarse grid and fine grid. Such process was applied to optimize a three-stage axial turbine. During the optimization, blade shape and meridional channel were respectively optimized. Through optimization, the total efficiency increased 1.3% and total power increased 2.4% while total flow rate only slightly changed. Therefore, the total performance was improved and the design objective was achieved. The preliminary design makes use of quasi-three dimensional(Q3D) design methods to achieve most reasonable parameter distribution so as to preliminarily enhance total performance. Then total performance will be further improved by adopting multistage local optimization design. Thus the design objective will be successfully achieved without huge expenditure of manpower and calculation time. Therefore, such optimization design process may be efficiently applied to the aerodynamic design optimization of multistage axial turbine.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.201-201
• /
• 2006

영구자석은 크게 Hard ferrite와 희토류계 자석, 그리고 Alnico 주조자석으로 구별되어진다. 그동안 Hard ferrite는 산업적으로 전자기 응용제품 또는 각종 구동 모터에 응용되어 왔지만, 최근 Nd계 희토류 자것이 고성능 모터의 소재로 급격히 대체되고 있다. 하지만, 희토류계 원료에 비해 동일 중량 대비 40~60배 가량 저렴한 Hard ferrite의 사용은 현재까지도 꾸준히 유지되고 있으며, 최근 자동차 고성능 모터용 Sr ferrite의 개발이 연구 중이다.[2] 본 연구에서는 제일원리 전산모사를 통하여 HCP 구조의 기본 Unit Cell 64개 원자를 가진 Sr-ferrite의 격자상수를 계산하여 기존 연구결과와 비교하였으며, 자화에너지와 자기모멘트를 계산하였다. 또한 향후 각종 첨가물의 영향에 대한 연구를 위해 기본 구조 및 치환 구조에 대해 고찰하였다. 그 결과 가장 안정한 에너지를 갖는 격자상수는 a=5.88, b=23.03으로 계산되어 Kimura et al의 측정 결과와 유사한 결과를 얻을 수 있었으며, $E_F$가 3.9171, $M_B$는 46.6481로 계산되었다. 항후 Sr-ferrite의 구조에서 Fe atom의 일부를 동일주기 원소인 Cr, Mn, Co, Ni, Cu로 치환하여 자기적 특성을 계산하여 본 연구결과와 비교하고자 한다.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제20권4호
• /
• pp.253-266
• /
• 2017

본 연구는 초등수학수업의 개선을 목표로 초등교사의 수학수업에 대한 인식을 조사함으로써 이후 수학수업개선의 방향 설정에 시사점을 제공하고자 한다. 이를 위해 수학수업분석 강의를 수강하는 초등교사의 수학수업에 대한 생각을 조사하였다. 특히 조사대상 교사들은 수학수업분석에 관심이 있을 뿐 아니라 실제 현장에서 타교사의 수학수업 분석 및 컨설팅 경험이 있는 교사들로, 조사대상 교사들이 가진 수학수업에 대한 생각들이 다른 교사들에게도 영향을 미칠 수 있다는 측면에서 이들이 가진 수학수업에 대한 인식은 중요한 의미를 가진다. 강의 수강 전에 수학을 중요 교과라고 생각하는 이유, 초등학생들이 수학을 싫어하고 어려워하는 이유, 현재 초등학교 수학교육이 제대로 이뤄지지 않은 이유, 바람직한 수학수업의 모습과 이를 위한 변화 등에 대해 서술형 문항을 이용하여 자료를 수집하였다. 수집된 자료를 분석하여 이후 수학수업의 변화에 대한 시사점을 제시하였다.

• 대한임베디드공학회논문지
• /
• 제15권3호
• /
• pp.149-157
• /
• 2020

Regarding previously-developed drone simulators, it was easy to check their flight stability or controlling functions based on the condition that their weight was fixed from the design. However, the drone is largely classified into two types that is the one with the fixed weight whose purpose is recording video with camera and racing and another is whole weight-variable during flight with loading the articles for delivery and spraying pesticide though the weight of airframe is fixed. The purpose of this thesis is to analyze the structure of drone and its flight principle, suggest dynamics-model-based simulator that is capable of simulating weight-variable drone and develop the simulator that can be used for designing main control board, motor and transmission along the application of weight-variable drone. Weight-variable simulator was developed by using various calculation to apply flying method of drone to the simulator. First, ground coordinate system and airframe-fixing coordinate system were established and switching matrix of those two coordinates were made. Then, dynamics model of drone was established using the law of Newton and moment balance principle. Dynamics model was established in Simulink platform and simulation experiment was carried out by changing the weight of drone. In order to evaluate the validity of developed weight-variable simulator, it was compared to the results of clean flight public simulator against existing weight-fixed drone. Lastly, simulation test was performed with the developed weight-variable simulation by changing the weight of drone. It was found out that dynamics model controlled various flying positions of drone well from simulation and the possibility of securing the optimum condition of weight-variable drone that has flying stability and easiness of controlling.

• 한국재료학회지
• /
• 제29권7호
• /
• pp.451-455
• /
• 2019

The electromagnetic and thermal properties of a heavy fermion $CeNi_2Ge_2$ are investigated using first-principle methods with local density approximation (LDA) and fully relativistic approaches. The Ce f-bands are located near the Fermi energy $E_F$ and hybridized with the Ni-3d states. This hybridization plays important roles in the characteristics of this material. The fully relativistic approach shows that the 4f states split into $4f_{7/2}$ and $4f_{5/2}$ states due to spin-orbit coupling effects. It can be found that within the LDA calculation, the density of states near the Fermi level are mainly of Ce-derived 4f states. The Ni-derived 3d states have high peaks around -1.7eV and spreaded over wide range around the Fermi level. The calculated magnetic of $CeNi_2Ge_2$ with LDA method does not match with that of experimental result because of strong correlation interaction between electrons in f orbitals. The calculations show that the specific heat coefficient underestimates the experimental value by a factor of 19.1. The discrepancy between the band calculation and experiment for specific heat coefficient is attributed to the formation of a quasiparticle. Because of the volume contraction, the exchange interaction between the f states and the conduction electrons is large in $CeNi_2Ge_2$, which increases the quasiparticle mass. This will result in the enhancement of the specific hear coefficient.

• Earthquakes and Structures
• /
• 제23권2호
• /
• pp.169-181
• /
• 2022

To research the dynamic response of the high-rise structure under the rocking ground motion, which we believed that the effect cannot be ignored, especially accompanied by vertical ground motion. Theoretical analysis and shaking table seismic simulation tests were used to study the response of a high-rise structure to excitation of a H-V-R ground motion that included horizontal, vertical, and rocking components. The use of a wavelet analysis filtering technique to extract the rocking component from data for the primary horizontal component in the first part, based on the principle of horizontal pendulum seismogram and the use of a wavelet analysis filtering technique. The dynamic equation of motion for a high-rise structure under H-V-R ground motion was developed in the second part, with extra P-△ effect due to ground rocking displacement was included in the external load excitation terms of the equation of motion, and the influence of the vertical component on the high-rise structure P-△ effect was also included. Shaking table tests were performed for H-V-R ground motion using a scale model of a high-rise TV tower structure in the third part, while the results of the shaking table tests and theoretical calculation were compared in the last part, and the following conclusions were made. The results of the shaking table test were consistent with the theoretical calculation results, which verified the accuracy of the theoretical analysis. The rocking component of ground motion significantly increased the displacement of the structure and caused an asymmetric displacement of the structure. Thus, the seismic design of an engineering structure should consider the additional P-△ effect due to the rocking component. Moreover, introducing the vertical component caused the geometric stiffness of the structure to change with time, and the influence of the rocking component on the structure was amplified due to this effect.

• Structural Engineering and Mechanics
• /
• 제81권2호
• /
• pp.179-194
• /
• 2022

The bending, buckling and free vibration responses of functionally graded material (FGM) beams are investigated semi-analytically by the scaled boundary finite element method (SBFEM) in this paper. In the concepts of the SBFEM, the dimension of computational domain can be reduced by one, therefore only the axial dimension of the beam is discretized using the higher order spectral element, which reduces the amount of calculation and greatly improves the calculation efficiency. The governing equation of FGM beams is derived in detail by the means of the principle of virtual work. Compared with the higher-order beam theory, fewer parameters and simpler control equations are used. And the governing equation is transformed into a first-order ordinary differential equation by introducing intermediate variables. Analytical solutions of the governing equation can be obtained by pade series expansion in the direction of thickness. Numerical example are compared with the numerical solutions provided by the previous researchers to verify the accuracy and applicability of the proposed method. The results show that the proposed formulations can quickly converge to the reference solutions by increasing the order of higher order spectral elements, and high accuracy can be achieved by using a small number of the elements. In addition, the influence of the structural sizes, material properties and boundary conditions on the mechanical behaviors of FG beams subjected to different load types is discussed.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제45권4호
• /
• pp.439-457
• /
• 2006

This research was to understand the features of mathematization and didactical phenomenology, in a way that was not a routine calculation of equation, rather a complete comprehension by the reinventing historical principles of the equation. To achieve the purpose of this study, one-mate middle school student participated in the study. Interview and observation were used for collecting data during the student's performance. The results of research were: First, the student understood the mathematical concepts from a real life and developed the abstract concepts from it, which were very intimately related with his life. Second, the skill and formula definition were accomplished with the accompanying predicted and consequently derived mathematical concepts. Third, through the approach of using the history of mathematics, he became more interested in what he was doing and took lessons with confidence. Forth, the student performed his learning based on the historical reinventing principle under the proper guidance of a teacher.

• 무역상무연구
• /
• 제77권
• /
• pp.23-42
• /
• 2018

This study compares the SGA and CISG to find out the difference of the criteria for calculating damages. and it intends to give some important points in trade practice. The damages is intended to compensate the victim for the breach of contract but there are differences between SGA and CISG as follow. First, the SGA and CISG have the same purpose of claiming damages. Both laws and regulations are subject to a full indemnification to compensate for the breach of the contract by the amount equivalent to the loss suffered by the victim. Second, in the general principle related to the calculation of damages, both law enforcement officials are required to be able to predict damages caused by breach of contract. In the case of SGA, however, a foreseeability test or remoteness of damages is required for the relationship between the contract violation and the loss. In other words, it can be said that the causal relation between the contract violation and the damage is strictly applied rather than the CISG. Finally, both laws and regulations of SGA and CISG have a big difference in criteria for calculating damages. In the CISG, after the contract is canceled, it is classified according to the existence of the alternative transaction and the damage amount is calculated based on the contract price. On the other hand, the SGA estimates the loss based on the market price at the delivery of the goods, reflecting the change in the market price instead of the contract price of the goods.