• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.103-105
• /
• 2011

The purpose of this study is to suggest basic data which is firing technique at manufacturing time for preservation and rehabilitation of masonry modern architecture by assumed firing-temperature. It could be possible to estimate firing-temperature at manufacturing time through the result of the experiments, XRD and changed absorbing ratio from re-firing.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.129-132
• /
• 2013

The low rank coal combustion and biomass-coal co-firing characteristics were reviewed on this study for the power plant construction. The importance of using low rank coal(LRC) for power plant is increasing gradually due to power generation economy and biomass co-firing is also concentrated as power source because it has carbon neutral characteristics to reduce green-house effect. The combustion characteristics of low rank coal and biomass for a 310MW coal firing power plant and a 100MW biomass and coal co-firing power plant were studied to apply into actual power plant design and optimized the furnace and burner design.

• The Korean Journal of Physiology and Pharmacology
• /
• v.22 no.6
• /
• pp.721-729
• /
• 2018

GABAergic control over dopamine (DA) neurons in the substantia nigra is crucial for determining firing rates and patterns. Although GABA activates both $GABA_A$ and $GABA_B$ receptors distributed throughout the somatodendritic tree, it is currently unclear how regional GABA receptors in the soma and dendritic compartments regulate spontaneous firing. Therefore, the objective of this study was to determine actions of regional GABA receptors on spontaneous firing in acutely dissociated DA neurons from the rat using patch-clamp and local GABA-uncaging techniques. Agonists and antagonists experiments showed that activation of either $GABA_A$ receptors or $GABA_B$ receptors in DA neurons is enough to completely abolish spontaneous firing. Local GABA-uncaging along the somatodendritic tree revealed that activation of regional GABA receptors limited within the soma, proximal, or distal dendritic region, can completely suppress spontaneous firing. However, activation of either $GABA_A$ or $GABA_B$ receptor equally suppressed spontaneous firing in the soma, whereas $GABA_B$ receptor inhibited spontaneous firing more strongly than $GABA_A$ receptor in the proximal and distal dendrites. These regional differences of GABA signals between the soma and dendritic compartments could contribute to our understanding of many diverse and complex actions of GABA in midbrain DA neurons.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.4
• /
• pp.355-366
• /
• 1997

Although cerebellar Purkinje cells display spontaneous electrical activity in vivo and in slice experiments, the mechanism of the spontaneous activity generation has not been clearly understood. The aim of this study was to investigate whether cerebellar Purkinje cells of postnatal rats generate spontaneous electrical activity without synaptic inputs. Dissociated cerebellar Purkinje cells were used for reducing synaptic inputs in the present study. Cerebellar Purkinje cells with dendrites were dissociated from postnatal rats using enzymatic treatment followed by mechanical trituration. Spontaneous electrical activities were recorded from dissociated cells without any stimulus using whole-cell patch clamp configuration. Two types, spontaneously firing or quiescent, of dissociated Purkinje cells were observed in postnatal rats. Both types of cells were identified as Purkinje cells using immunocytochemical staining technique with anti-calbindin after recording. Spontaneously active cells displayed two patterns of firing, repetitive and burst firings. Two thirds of dissociated Purkinje cells displayed repetitive firing and the rest of them did burst firing under same recording condition. Repetitive firing activities were maintained even after further isolation using either physical or pharmacological techniques. Neither high magnessium solution nor excitatory synaptic blockers, AP-5 and DNQX, block the spontaneous activity. These results demonstrate that spontaneous electrical activity of isolated cerebellar Purkinje cells in postnatal rats is generated by intrinsic membrane properties rather than synaptic inputs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.24 no.1
• /
• pp.73-83
• /
• 1986

The purpose of this study was to evaluate the distortion of 6-unit etched bridge during the firing cycle. Thirty frameworks were constructed. Twenty of the frameworks received a normal application of porcelain and firing sequence ; ten served as controls and subjected to the same firing sequence without the porcelain application. The results were as follows ; 1. Distortion did occur in the body of curved, long-span etched bridge frameworks during the porcelain firing cycle. 2. This distortion was a result of changes in the metal as well as the contraction of fired porcelain. 3. The greatest distortional changes occurred during the degassing stage and final glaze stage of the porcelain firing cycle. 4. Distortion incurred by the application and firing of the porcelain was reversible. When the porcelain was chemically removed from the frameworks, there was an elastic rebound. 5. Distortion was clinically important.

• Journal of Environmental Health Sciences
• /
• v.37 no.3
• /
• pp.173-181
• /
• 2011

Koo-ni Firing Range in Maehyang-ri consisted of a firing range around 'Nong-sum' and a land-based firing range in the nearby coastal area. From 1951, when the US Air Force began field firing, residents of Maehyang-ri suffered damage to health, environment, life and property due to 54 years of field firing and noise. The purpose of this article is to provide an overview of the environmental damage, property loss, and health impairment by reviewing literature and related lawsuits. Environmental damage, the destruction of coastal fisheries and wetlands, would be a result of heavy metal contamination of soil. Fishing restrictions and the confiscation of farmlands caused financial hardship. Errant bombings led to the loss of life and property, including buildings and livestock. As a result, residents repeatedly sued the Republic of Korea for damages. The court decided partially in favor of the plaintiffs. Finally, Koo-ni firing range was closed down in 2005. Through the literature review, it is presumed that the noise caused hearing problems, hypertension, and mental illness. Since earlier studies were confined to a small fragment of the damage, additional studies focused on chronic health hazards are needed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.251-254
• /
• 2008

Ground firing test facility and test field for firing test of hybrid rocket engine were constructed. Ground firing test facility were composed of hybrid rocket engine, thrust stand, oxidizer storage/supply system, control system and data acquisition system. Firing tests of thrust 50 kgf class were conducted. Stable performance data was obtained and operational reliability of ground firing test facility were found.

• Korean Journal of Dental Materials
• /
• v.44 no.4
• /
• pp.337-348
• /
• 2017

In this study, the effect of cooling rate control on the change in hardness of the multi-purpose Ag-Pd-Zn-In-Sn alloy during porcelain firing simulation and post-firing heat treatment was investigated, and the following results were obtained. Softening of the multi-purpose Ag-Pd-Zn-In-Sn alloy during porcelain firing simulation was suppressed by controlling the cooling rate. When the cooling rate was adjusted to stage 0(firing chamber moves immediately to upper end position), the alloy was softened during porcelain firing simulation, and the hardness was greatly increased by the additional post-firing heat treatment. When the cooling rate was adjusted to stage 3(firing chamber remains closed), the alloy was not softened even after porcelain firing simulation, and the hardness was apparently lowered by the additional post-firing heat treatment. The apparent increase in hardness in the post-firing heat treated alloy after porcelain firing simulation at cooling rate of stage 0 attributed to the active precipitation. The apparent decrease in hardness in the post-firing heat treated alloy after porcelain firing simulation at cooling rate of stage 3 attributed to the fact that the precipitates were solutionized into the matrix by the post-firing heat treatment.

• Journal of Oral Medicine and Pain
• /
• v.24 no.4
• /
• pp.421-437
• /
• 1999

This study was performed to investigate the electromyographic(EMG) activity, firing time and sequence of the mandibular elevator muscle on gum chewing. For this study, 28 patients with temporomandibular disorders(TMD), especially internal derangement of TM joint, and 16 dental students without any signs and symptoms in the masticatory system were selected as the patients group and as the normal group, respectively. The patients group was composed of 14 right and 14 left side affected patients. For recording of EMG activity(${\mu}V$) of the anterior temporalis(TA) and the masseter muscle(MM), and measuring of firing time(millisecond) from the start of mandibular opening movement to the firing of the muscles, BioEMG, BioEGN, and Combo program integrated in the Biopak system(Bioresearch Inc., Milwaukee, USA) were used. Gum chewing stroke was performed in both right and left side for several times, and the first and the second chewing strokes were analysed and compared with regard to EMG activity, firing time, firing sequence, correlation between EMG activity and firing time. The data obtained were analysed by SPSS windows program and the results of this study were as follows : 1. In the patients group, chewing on the affected side showed higher EMG activities in the masseter of the side than those of the contralateral side, but chewing on the unaffected side showed higher EMG activity in the masseter and in the anterior temporalis of the side than those of the contralateral side. 2. There were no difference of firing time between both sides on chewing on the affected side, but firing time in the chewing side were earlier than that of contralateral side on chewing on the unaffected side in patients group. 3. In the normal group, EMG activities in the masseter and in the anterior temporalis in the chewing side were always higher than those of the contralateral side, and there were no difference of firing time between the two sides. 4. In general, firing sequence of four muscles of both sides were ipsilateral TA, ipsilateral MM, contralateral TA, and contralateral MM in earlier order of time in both groups. Correlation coefficients between EMG activity and firing time were negative value, and more significant correlation were appeared in the normal group than in the patients group.

• Korean Journal of Dental Materials
• /
• v.42 no.2
• /
• pp.95-106
• /
• 2015

Hardening mechanism associated with post-firing heat treatment of softening heat treated and then firing simulated Pd-Ag-Au alloy for bonding porcelain was examined by observing the change in hardness, crystal structure and microstructure. By post-firing heat treatment of as-cast, solution treated and pre-firing heat treated specimens at $650^{\circ}C$ after casting, the hardness value increased within 10 minutes. Then, hardness consistently increased until 30 minutes, and gap of hardness value among the specimens was reduced. The increase in hardness after post-firing heat treatment was caused by grain interior precipitation in the matrix. The softening heat treatment did not affect the increase in hardness by post-firing heat treatment. The precipitated phase from the parent Pd-Ag-Au-rich ${\alpha}$ phase with face-centered cubic structure by post-firing heat treatment was $Pd_3$(Sn, In) phase with face-centered tetragonal structure, which has lattice parameters of $a_{200}=4.0907{\AA}$, $c_{002}=3.745{\AA}$. From above results, appropriate post-firing heat treatment in order to support the hardness of Pd-Ag-Au metal substructure was expected to bring positive effects to durability of the prosthesis.