• 한국터널지하공간학회 논문집
• /
• 제20권2호
• /
• pp.527-539
• /
• 2018

다수의 승객들이 이용하는 지하철은 안전과 공간의 쾌적한 환경관리가 필수적이며, 2003년 이후 기준 강화로 승강장 내에 스크린도어(PSD)를 반드시 설치해야 한다. 선행연구에 따르면 지하철 화재 시에 화재연기의 배연을 위해 배연설비의 설비용량 최적설계가 필요하다. 따라서 본 연구에서는 선행연구의 실험 결과를 바탕으로 3차원 수치해석기법을 이용하여 PSD가 설치된 승강장 내에서 화재발생 시 배연시스템 별로 CO가스와 Smoke의 유동을 분석하였다. 본 연구의 결과 비상시 상부 배연설비만 가동한 경우에는 CO 가스와 Smoke 농도는 653.8 ppm과 $768.4mg/m^3$로 피난 시 승객들의 위험이 큰 것으로 분석되었으며, 모든 배연설비를 가동하고 화재측 PSD만을 개방한 경우 CO 가스와 Smoke 농도 36.0 ppm 및 $26.2mg/m^3$를 보이며 화재연기의 전파범위가 줄어드는 것으로 분석되었다. 모든 배연설비를 가동하고 화재측 PSD를 미개방한 경우에는 화재연기 유입이 발생하지 않아서 대피환경에 있어 가장 효과적인 배연모드로 분석되었다.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.348-352
• /
• 2004

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and ow loss, but it needs some cooling method because heat radiation between each winding is difficult. The life of transformer is significantly dependent on the thermal behavior in windings. Many transformer designers have calculated temperature distribution and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1154-1159
• /
• 2006

The mold transformers have been widely used in underground substations of large building and have some advantages when compared with oil-transformer. Those advantages are low fire risk, environmental compatibility, compact size and high reliability. The mold transformer is generally known to have cooling duct between low voltage and high voltage coil. To achieve better compact structure and low loss, mold transformers made by one body molding method has been developed. Nevertheless, such kinds of transformer need better cooling method because heat radiation between each winding is still of problem. The life of transformer is significantly dependent on the thermal behavior in windings. Many designers have calculated temperature distribution in transformers and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, the temperature distribution analysis of 100 kVA pole mold transformer for power distribution were investigated by FEM program and the thermal analysis results were compared with temperature rise test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1135-1138
• /
• 2003

The transformer is major equipment in power receiving and substation facilities. Necessary conditions required for the transformer are compactness, lightness, high reliability, economic advantages, and easy maintenance. The pole-mount transformer installed in distribution system is acting direct role in supply of electric power and it is electric power device should drive for long term. Most of modem transformer are oil-filled transformer and accident is happening considerable. The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. One body molding transformer needs some cooling method because heat radiation between each winding is difficult. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.69-76
• /
• 2018

General workers who assist various technicians in different fields with their work across the whole construction sites without having a particular skill are at risk of the highest accident rate and their accident form becomes varied. Accordingly, this study was conducted to identify the relationship between form of safety accident and influence factor in general workers and analyze accident severity by influence factor. The followings are the results from this study. First, as a result of analyzing major form of accident and influence factors in general workers with network analysis methodology, nine forms of accident and seventeen influence factors were drawn. Second, it was found that in accident severity among general workers, collapsing, among various forms of accident, appeared the highest, followed by fall, electric shock, fire, hit by an object, bumped against, trip, scission getting cut chopped in order. Third, main points of special, concentrated, and permanent management were presented in order to reduce the safety accident in general workers effectively.

• 한국가스학회지
• /
• 제20권5호
• /
• pp.89-95
• /
• 2016

가스 배관을 공동구 내에 수용하는 것은 단순 매설하는 것보다 부식의 위험이 적고, 외부인의 출입이나 굴착공사 등으로부터 오는 물리적 손상을 예방할 수 있다는 점에서 편의성이 크다. 그러나 밀폐된 공간이라는 특성상 개방된 공간에서의 폭발보다 폭발 과압에 의한 피해가 크다. 그럼에도 공동구에 대한 연구는 화재 사고에 국한되어 진행되었고, 폭발로 인한 위험성에 관한 연구가 부족한 실정이다. 본 연구는 지하 공동구 내부의 가스배관으로부터 누출된 메탄가스가 원인모를 점화원에 의해 폭발을 일으켰을 경우를 가정하여 피해결과 관점에서 공동구 내부의 폭발이 상부 시설물에 미치는 영향을 살펴보았다. 안전설비의 작동상태에 따른 2가지의 시나리오를 선정하여 CFD tool인 FLACS를 사용하여 영향성 평가를 진행한 결과 대부분의 건축물을 전파 시킬 수 있을 정도의 폭발 과압이 예측되었다. 이 결과를 활용하여서 사고 발생 빈도를 감소시켜 안전성을 확보할 수 있는 추가 대책을 제시하였다.

• 한국터널지하공간학회 논문집
• /
• 제9권3호
• /
• pp.287-298
• /
• 2007

최근 새로운 철도를 건설하거나 기존선로를 개량하기 위하여 터널의 건설이 급속히 증가하고 있으며, 점점 장대화 되고 있는 실정이다. 그러나 터널이 장대화됨에 따라 터널내에서의 화재사고 발생시 치명적인 대형사고의 가능성이 증대되고 있어, 장대터널에서의 안전성에 대한 관심이 증가하고 있다. 이러한 이유로 터널내 위험도를 최소화하고 터널방재기준을 만족시킬 수 있는 터널내 방재시설에 대한 최적의 설계기준이 요구되고 있으며, 장대 철도터널의 합리적인 설계를 위하여 터널 방재 안전성에 대한 정량적인 평가방법이 필요하다 할 수 있다. 본 연구에서는 정량적 위험도 분석방법인 QRA 기법을 장대터널에서의 방재 안전성 평가에 적용하여 그 유효성을 검토하고자 하였다. 적용사례에서는 장대터널에서의 갱외탈출로 개념의 사갱 및 수직구 계획을 수립하기 위하여 각각의 경우에 대한 QRA분석을 실시하고, 장대터널의 방재 안정성을 평가하므로서 실행 가능한 합리적인 수준의 터널 방재설계를 수행하고자 하였다.

• 대한불안의학회지
• /
• 제15권1호
• /
• pp.35-44
• /
• 2019

Objective : The aim of this study was to investigate the individual and job related factors as risk factors for mental health of firefighters. Methods : The data of 202 fire-fighters was analyzed by using a multinomial logistic regression analysis. All participants completed self-reported questionnaires including demographics (sex, age, work duration), the Childhood Trauma Questionnaire, the Ways of Coping Checklist, the Colleague related traumatic events, the Korean occupational stress scale, the Korean Perceived Stress Scale-10, and the Beck Depression Inventory. Participants were divided into three groups according to the level of stress and depressive symptom scores: Low Stress-Low Depression (LS-LD), High Stress-Low Depression (HS-LD), and High Stress-High Depression (HS-HD). Results : A job related factor-organizational injustice-was a significant factor related to HS-LD, while individual factors such as active coping level and childhood trauma experience and a job related factor-difficult physical environment-were significantly associated with HS-HD. Conclusion : These results imply the need to take both individual and environmental approaches into account when managing the stress and depression of firefighters. More specifically, psycho-education to facilitate active coping strategy and adaptive emotional regulation at the individual level and the improvement of physical work environment of firefighters should be supported.

• 한국안전학회지
• /
• 제35권6호
• /
• pp.25-31
• /
• 2020

Boiling Liquid Expanding Vapor Explosion(BLEVE) can cause not only economic damage to the plant but also serious casualties. LPG accidents account for 89.6 percent of all accidents caused by gas leaks in Korea over the past nine years, while casualties from accidents also account for 73 percent of all accidents, according to statistics from the Korea Gas Safety Corporation. In addition, a potential explosion and a fire accident from one LPG storage tank may affect the nearby storage tanks, causing secondary and tertiary damage (domino effect). The safety distance standards for LPG used by LPG workplaces, charging stations, and homes in Korea have become stricter following the explosion of LPG charging stations in Bucheon. The safety distance regulation is divided into regulations based on the distance damage and the risk including frequency. This study suggests two approaches to optimizing the safety distance based on the just consequence and risk including frequencies. Using the Phast 7.2 Risk Assessment software by DNV GL, the explosion overpressure and heat radiation were derived according to the distance caused by BLEVE in the worst-case scenario, and accident and damage probability were derived by considering the probit function and domino effect. In addition, the safety distance between LPG tanks or LPG charging stations was derived to minimize damage effects by utilizing these measures.

• Journal of Acupuncture Research
• /
• 제38권1호
• /
• pp.20-31
• /
• 2021

The objective was to evaluate the effectiveness and safety of acupuncture for patients with rotator cuff diseases. There were 12 electronic databases and 3 trial registries searched up to November 30th, 2019. All randomized trials were eligible, regardless of language, date of publication, or settings. The primary outcomes were pain, shoulder function, and proportion of improved participants assessed within 12 weeks of randomization of the trial. The Cochrane risk of bias for the studies was assessed. Effects sizes were presented as a risk ratio, mean difference, or standardized mean difference with a 95% confidence intervals. Grading of Recommendations Assessment, Development and Evaluation approach was adopted to rate certainty of evidence. Of the 3,686 records screened, 28 randomized trials (2,216 participants) were included in this review. The types of acupuncture included manual acupuncture, dry needling, electroacupuncture, acupotomy, warm needle acupuncture, and fire needle acupuncture. All of the studies had an unclear or high risk of bias related to more than 1 domain. Significant benefits of acupuncture in terms of pain and shoulder function were observed in all comparisons, however, the proportion of improved participants was not described in 2 comparisons. There was substantial heterogeneity among meta-analyzed trials. No serious harm was observed. For primary outcomes, the overall certainty of evidence was very low. There was very low certainty of evidence for the benefits of acupuncture for patients with rotator cuff diseases. The safety of acupuncture remains unclear due to the incompleteness of reporting. Future well-designed randomized trials with transparent reporting are required.