• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.274-274
• /
• 2002

Damage to forest trees, caused by wildfire, changes their spectral reflectance signature. This factor led to the initiation of a research project at the Remote Sensing & GIS Laboratory, Kookmin University, to determine if multispectral data acquired by IKONOS could provide fire scar and bum severity mapping. This paper will present detail mapping of burned areas in the eastern coast of Korea with IKONOS imagery. In addition, a single post-burn Landsat-7 ETM＋ data was used to compare with IKONOS, the study area. Burn severity map based on IKONOS image was found to be affected by strong topographic illumination effects in the mountain forest. But it has better the delineation of the bum-scarred area. In this study the NDVI was analyzed for geometric illumination conditions influenced by topography(slop, aspect and elevation) and shadow(solar elevation and azimuth angle).

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.251-256
• /
• 2019

With the fast development of modern society, the interests concerned about the significance of nature and environment become major issue nowadays. Especially, threats for our health due to severe environmental pollution and fine dusts become serious problem with the fast industrialization of our society, and extra attention is focused on interests about conservation of nature and management of forest resources. Precious forest resources, however, are not properly managed and destroyed vainly due to frequent fire, damage by storms and floods, and unplanned land development. So systematic and scientific construction and management of forest resources are required in order to solve these problems efficiently. Furthermore, implementation of the forest resource information database that contains information of trees, Topography, ecosystem of the forest is urgently needed. In this paper, we design and implement the forest resource information database based on the information of location based forest resources and Topography using forest images taken by a drone, that enables us to manage forest resources efficiently, make decision for logging, and construct a future tree-planting project easily.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.103-109
• /
• 2009

Analysis of collection factor was studied to compare various parameters such as collection time, transport time, amount of collection and number of man power by on-the-spot survey at one municipal area and one rural area in Jeju-do. Results showed that the amount of man and time to collect 1 ton of waste of rural area($5.853man{\cdot}hour\;per\;time$) was four times as much as that of municipal area($1.527man{\cdot}hour\;per\;time$). In case of a transport time, rural area(11.08 per km/hr) has similar value to municipal area(11.07 per km/hr) and has half or one third value to the restaurant(36.7km/hr), an apartment area(33.0km/hr) and a detached area(22.4km/hr).

• Journal of Internet Computing and Services
• /
• v.18 no.5
• /
• pp.69-77
• /
• 2017

In this paper, a disaster response scheme based on deep learning and augmented reality technology is proposed and a network resource reservation scheme is presented accordingly. The features of deep learning, augmented reality technology and its relevance to the disaster areas are explained. Deep learning technology can be used to accurately recognize disaster situations and to implement related disaster information as augmented reality, and to enhance disaster response capabilities by providing disaster response On-site disaster response agent, ICS (Incident Command System) and MCS (Multi-agency Coordination Systems). In the case of various disasters, the fire situation is focused on and it is proposed that a plan to strengthen disaster response capability effectively by providing fire situation recognition based on deep learning and augmented reality information. Finally, a scheme to secure network resources to utilize the disaster response method of this paper is proposed.

• Journal of Korea Water Resources Association
• /
• v.52 no.11
• /
• pp.941-946
• /
• 2019

A wildfire could significantly alter the local hydrological regime, depending on the area and severity, and thus it is critical to understand its effect and feedback using data and simulation. For the wildfire in Gangwon-do on April 4-5, 2019, South Korea, we retrieved the Normalized-Burned Ratio (NBR) index using remote-sensing data (500-m 8-day MODIS surface reflectance data), and detect the damaged-area based on the difference in the NBR (dNBR) before and after the fire. The damaged area was $29.50km^2$ in total, taking up 1.00-6.19% of five catchments. We then used remote-sensing data (500-m 8-day MODIS evapotranspiration data) and estimated that annual evapotranspiration (AET) would decrease as 0.05-1.56% over the five catchments, as compared to the pre-fire AET (2004-2018). This study highlights the importance of improving our understanding about the impact of wildfire on the local hydrological cycle.

• Atmosphere
• /
• v.20 no.2
• /
• pp.173-186
• /
• 2010

The impact of the precipitation has been focused on losses in social and economical sectors. However, as growing the concerns of the future water shortage caused by the climate change, the precipitation should be consider in various views for an effective planning in the water resource management. A precipitation case occurred from 20 to 21 April 2009 was recorded as a welcome rain because it reduced the severe drought continued in Korea from winter season of 2008. In this study, economic values of the event was calculated with positive aspects in various sectors. The estimation is based on four major parts such as a secure of water resources, the improvement of air quality, the decrease of forest fires, and the reduction of the drought impact. The water resources only considered inflow waters into dams and the reservoirs managed by Korean public institutions and their economic values accounts for 5.92 billion won. Decreases of four air pollutants($PM_{10}$, $NO_2$, CO, and $SO_2$) were considered as the positive effects of the rainfall and estimated 175.4 billion won. The preventive effect of the forest fire after the rainfall results in 0.48 billion won. Finally, the rainfall during the drought period is effective to reduce the social costs of 108.65 billion won. Although the economic values estimated in this study explain parts of the positive effects of the precipitation, it can help to develop a comprehensive and systematic valuation system for the whole process of the precipitation. For doing this, various rainfall types should be analyzed in social-economic terms including economics, environments and hydrology.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.37-49
• /
• 1999

The effect of fire-retardant treatment and redrying on the mechanical properties of radiata pine sapwood were evaluated. Small, clear specimens were treated with three different fire-retardant(FR) chemicals, borax-boric acid(BRX), minalith(MIN), and pyresote(PYR), with target retentions of 30 and 60kg/$m^3$, and then redried at maximum dry-bulb temperature of $25^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ or $110^{\circ}C$. Each specimen, including untreated and water-treated controls, was tested in static bending and in compression parallel to grain. The extent of strength reduction was dependent on the type of FR chemicals, retention, and redrying temperature, and a highly significant interaction existed between FR treatment and redrying temperature. Modulus of rupture(MOR) and work to maximum load(WML) were significantly decreased by FR treatment and redrying. None of three FR chemicals adversely affect modulus of elasticity (MOE) and maximum crushing strength(MCS). MOE of BRX treatment and MCS of both BRX and PYR treatment increased significantly compared to untreated controls. No significant differences existed between retention levels except for MOE and MCS of some combinations of FR chemicals and redrying temperatures. Although MOE and MCS was not significantly affected by any of the redrying temperatures, these properties were generally decreased with the increase in redrying temperature. The significant reduction in MOR and WML was observed in BRX treatment when dried at temperatures of $60^{\circ}C$ and above, and in MIN and PYR treatment when dried at temperatures of $80^{\circ}C$ and above. Consequently, BRX-treated radiata pine should not be redried at temperatures >$60^{\circ}C$, and MIN- and PYR-treated radiata pine should not be redried at temperatures > $80^{\circ}C$ where bending strength and energy-related properties are important design considerations.

• Korean Journal of Plant Resources
• /
• v.29 no.1
• /
• pp.136-142
• /
• 2016

Lespedeza species are mainly used for wildlife food and cover and for erosion control. The germination of these species can be enhanced after a fire occurrence in forest, which is known as fire-activated seeds to germinate. While the heat treatment could break seed dormancy of Lespedeza, its germination rate was quite low. We investigated that chemical scarification could promote germination of L. tomentosa. Seeds were soaked in 100% sulfuric acid (H₂SO₄) for 0, 1, 3, 6, 12, 24, 48, 96, 192, and 384 min, and then washed in distilled water for 24 h. Very few seeds were germinated in control (H₂SO₄ for 0 min). More than 90% of seeds were germinated in H₂SO₄ for 24, 48, and 92 min. However, some damage was observed in roots and cotyledons of seedling dipped in H₂SO₄ for a long time. To search the optimal soaking time in H₂SO₄ without defects, seeds scarified in H₂SO₄ for 30, 60, 90, 120, 150, 180, and 300 min were sown the commercial soil medium. Seeds treated with H₂SO₄ for 90 min and 150 min emerged by about 92% and 84%, respectively. Therefore, H₂SO₄ treatment could break the seed dormancy of Lespedeza species, and especially in case of L. tomentosa the optimal treatment time in sulfuric acid was one to two hours. Germination of L. tomentosa began promptly following the scarification and was completed within about one month, indicating that seeds has no physiological dormancy, just has physical dormancy.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

In a steel structure, spray-applied fire resistive materials are crucial in preventing structural strength from being weakened in the event of a fire. The quality control of such materials, however, is difficult for manual workers, who can frequently be in short supply. These skilled workers are also very likely to be exposed to environmental hazards. Problems with construction work such as this, which are specifically the difficulty of achieving quality control and the dangerous nature of the work itself, can be solved to some degree by the introduction of automated equipment. It is, however, very difficult to automate the work process, from operation to the selection of a location for the equipment, as the environment of a construction site has not yet been structured to accommodate automation. This is a fundamental study on the possibility of the automation of spray-applied fire resistive coating work. In this study, the linkability of the cutting-edge RTLS to an automation system is reviewed, and a scenario for the automation of spray-applied fire resistive coating work and system composition is presented. The system suggested in this study is still in a conceptual stage, and as such, there are many restrictions still to be resolved. Despite this fact, automation is expected to have good effectiveness in terms of preventing fire from spreading by maintaining a certain level of strength at a high temperature when a fire occurs, as it maintains the thickness of the fire-resistive coating at a specified level, and secures the integrity of the coating with the steel structure, thereby enhancing the fire-resistive performance. It also expected that if future research is conducted in this area in relation to a cutting-edge monitoring TRS, such as the ubiquitous sensor network (USN) and/or building information model (BIM), it will contribute to raising the level of construction automation in Korea, reducing costs through the systematic and efficient management of construction resources, shortening construction periods, and implementing more precise construction

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.363-370
• /
• 2016

Lightweight geopolymers are more readily produced and give higher fire resistant performance than foam cement concrete. Lowering the density of solid geopolymers can be achieved by inducing chemical reactions that entrain gases to foam the geopolymer structure. This paper reports on the effects of adding different concentrations of aluminum powder on the properties of cellular structured geopolymers. The apparent density of lightweight geopolymers has a range from 0.7 to $1.2g/m^3$ with 0.025, 0.05 and 0.10 wt% of a foaming agent concentration, which corresponds to about 37~60 % of the apparent density, $1.96g/cm^3$, of solid geopolymers. The compressive strength of cellular structured geopolymers decreased to 6~18 % of the compressive strength, 45 MPa of solid geopolymers. The microstructure of geopolymers gel was equivalent for both solid and cellular structured geopolymers. The workability of geopolymers with polyprophylene fibers needs to be improved as in fiber-reinforced cement concrete. The lightweight geopolymers could be used as indoor wall tile or board due to fire resistance and incombustibility of geopolymers.