• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.1068-1072
• /
• 2011

Hydrogen Fuel Cell Vehicle(HFCV) is system that uses electrical energy of fuel cell stack to main power source, which is different system with other vehicles that use high-voltage, large-current. Isolation performance of this system which is connected with electrical fire and electrical shock is important point. Isolation resistance of electric installation is divided according to working voltage, it follows criterion more than $100{\Omega}$/VDC (or $500{\Omega}$/VAC) about system operation voltage in a hydrogen fuel cell vehicle. Although measurement of isolation resistance in a hydrogen fuel cell vehicle is two methods, it uses mainly measurement by megger. However, the present isolation resistance measurement system that is optimized to use in electrical facilities is unsuitable for isolation performance estimation of a hydrogen fuel cell vehicle because of limit of maximum short current and difference of measurement resolution. Therefore, this research developed the isolation resistance measurement system so that may be suitable in isolation performance estimation of a hydrogen fuel cell vehicle, verified isolation performance about known resistance by performance verification of laboratory level about developed system, and executed performance verification through comparing results of developed system by performance verification of vehicle level with ones of existing megger. Developed system is judged to aid estimation and upgrade of isolation performance in a hydrogen fuel cell vehicle hereafter.

• The Korean Journal of Health Service Management
• /
• v.7 no.3
• /
• pp.29-44
• /
• 2013

The purpose of this study is to give the users, who wants to know the information about CPR and AED on the Internet, more accurate information which is analyzed and considered with the factors to improve the contents of them. The source of the instrument for this study is from the contents of twenty four websites which is able to join in and searched by the Web Search Engine with four keywords: 'Cardiopulmonary Resuscitation', 'CPR', 'Automated External Defibrillator', and 'AED'. According to the results of the study, frequency questions of more than 50% among 53 questions on whether to suggest were investigated as 22 questions from content analysis results of the websites, and it showed that the highest frequency, which were examined to that chest compressions and respiratory rate; 79.2%. The correctness of the contents of the all websites of the study is as low as 36.00 point full marks at 100 points.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1020-1025
• /
• 2009

The five elements theory that people in the world objective theory is earned by a long-term observation. The key to the world and everything in the neck. The core content of this theroy is summed up in the world all things wood, fire, earth, gold, water-five material form. In the theory, the chracter's appearance, feature the five elements face is content. And the chracter's appearance, personality chracterisics and features of chracters and abstract nature of the mutual response plan which was formed way. Based on the number of world-famous cartoon chracter design analysis, special features and art theroy point the five elements the nature of man, who looks and chracter design by comparing the response of theroy and research and has the five elements. The analysis of theory and research the five elements art and people who find the nature of the systematic correlation to the future of animation, chracter design is applied.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.348-352
• /
• 2004

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and ow loss, but it needs some cooling method because heat radiation between each winding is difficult. The life of transformer is significantly dependent on the thermal behavior in windings. Many transformer designers have calculated temperature distribution and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.137-145
• /
• 2007

In traditional financial theory, the discount cash flow model(DCF or NPV) operates as the basic framework for most analyses. In doing valuation analysis, the conventional view is that the net present value(NPV) of a project is the measure of the present value of expected net cash flows. Thus, investing in a positive(negative) NPV project will increase(decrease) firm value. Recently, this framework has come under some fire for failing to consider the options of the managerial flexibilities. Real option valuation(ROV) considers the managerial flexibility to make ongoing decisions regarding the implementation of investment projects and the deployment of real assets. The appeal of the framework is natural given the high degree of uncertainty that firms face in their technology investment decisions. This paper suggests an algorithm for estimating volatility of logarithmic cash flow returns of real assets based on the Black-Sholes option pricing model, the binomial option pricing model, and the Monte Carlo simulation. This paper uses those models to obtain point estimates of real option value with the G7- HSR350X(high-speed train).

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2012

The purpose of water distribution system is supplying water to users by maintaining appropriate pressure and water quality. For efficient monitoring of the water distribution system, determination of optimal locations for pressure monitoring is essential. In this study, entropy theory was applied to determine the optimal locations for pressure monitoring. The entropy which is defined as the amount of information was calculated from the pressure change due to the variation of demand reflected the abnormal conditions at nodes, and the emitter function (fire hydrant) was used to reproduce actual pressure change pattern in EPANET. The optimal combination of monitoring points for pressure detection was determined by selecting the nodes receiving maximum information from other nodes using genetic algorithm. The Ozger's and a real network were evaluated using the proposed model. From the results, it was found that the entropy theory can provide general guideline to select the locations of pressure sensors installation for optimal design and monitoring of the water distribution systems. During decision-making phase, optimal combination of monitoring points can be selected by comparing total amount of information at each point especially when there are some constraints of installation such as limitation of available budget.

• Journal of Korean Academy of Rural Health Nursing
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2020

Purpose: This purpose of this study was to develop a disaster and safety practice measurement tool for elderly people in rural areas. Methods: The tool for this study was developed and validated according to DeVellis' scale development process. The construct validity of the instrument was analyzed by major analysis of Varimax rotation, and the internal inertia was verified by Cronbach's ⍺. Results: The final scale was a 4-point scale, consisting of 23 items in 7 domains. The total explanation was 54.1% and the Cronbach's ⍺ was .80. Conclusion: The results of this study should be useful to assess elders' perception of the importance of safety management for elders.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1154-1159
• /
• 2006

The mold transformers have been widely used in underground substations of large building and have some advantages when compared with oil-transformer. Those advantages are low fire risk, environmental compatibility, compact size and high reliability. The mold transformer is generally known to have cooling duct between low voltage and high voltage coil. To achieve better compact structure and low loss, mold transformers made by one body molding method has been developed. Nevertheless, such kinds of transformer need better cooling method because heat radiation between each winding is still of problem. The life of transformer is significantly dependent on the thermal behavior in windings. Many designers have calculated temperature distribution in transformers and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, the temperature distribution analysis of 100 kVA pole mold transformer for power distribution were investigated by FEM program and the thermal analysis results were compared with temperature rise test.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1117-1123
• /
• 2004

The characteristics of soot near the soot inception point for an ethene-air flame was carried out in a WSR (well-stirred reactor). The new sampling tool like the temperature controlled filter system was introduced to minimize the condensation during sampling. The new analysis tools applied include the real time size distribution analysis with the Nano-DMA, particle size by transmission electron microscopy, C/H analysis, g filter analysis, and thermogravimetric analysis using both non-oxidative and oxidative pyrolysis. The WSR can generate young soot particles that can be collected and examined to gain insight into inception. For the current conditions, soot does not form for ${\Phi}$=1.9, inception occurs at or before ${\Phi}$=2.0, and inception combined with soot surface growth and/or coagulation occurs for ${\Phi}$=2.1. The filter samples for ${\Phi}$=1.9 are composed of volatile compounds that evolve at relatively low temperatures when heated in the presence or absence of O$_2$. The samples collected from the WSR at ${\Phi}$=2.0 and ${\Phi}$=2.1 are precursor-like in morphology and size. They have higher C/H ratios and lower organic percentages than precursor particles, but they are clearly not fully carbonized soot. The WSR PAH distribution is similar to that in young soot from inverse flames.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.742-745
• /
• 2001

Plastics are one of difficult materials for recycling due to their characteristics in use. Recycling ratio of waste plastics was around 40% in last year in Japan, which includes energy recovery. Feed stock recycling and mechanical recycling are not easy because of additives in commercial plastics. Then, pyrolysis treatments have been done to recovery energy. Although plastics are easy to fire, complete combustion of them is not easy if anti-firing agents are added especially. Therefore, researches on pyrolysis or combustion behaviors of plastics containing additives are important from a view point recycling of plastics. Direct observation of popular plastics like polystyrene (PS), polycarbonate (PC), polyphenyle ether (PPE) and polyvinyl chloride (PVC) to investigate their pyrolysis behaviors in the present study. In case of PS, melting and gas evolution started at 9$0^{\circ}C$ and 39$0^{\circ}C$ respectively. And combustion finished at 445$^{\circ}C$. On the other hand, more than $600^{\circ}C$ and sufficient oxygen are required for complete combustion of PC and PPE.