• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.85-90
• /
• 2014

For the safe handling of acetic anhydride, this study was investigated the explosion limits of acetic anhydride in the reference data. And the lower flash points, upper flash points, and AITs(auto-ignition temperatures) by ignition delay time were experimented. The lower and upper explosion limits of acetic anhydride by the investigation of the literatures recommended 2.9 Vol% and 10.3 Vol.%, respectively. The lower flash point of acetic anhydride by using Setaflash closed-cup tester was experimented $49^{\circ}C$. The lower flash point acetic anhydride by using Tag and Cleveland open cup tester were experimented $55^{\circ}C$and $62^{\circ}C$, respectively. Also, this study measured relationship between the AITs and the ignition delay times by using ASTM E659 tester for acetic anhydride. The experimental AIT of acetic anhydride was $350^{\circ}C$.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.59-64
• /
• 2011

Explosion limit and flash point are the major combustion properties used to determine the fire and explosion hazards of the flammable substances. In this study, in order to predict upper explosion limits(UELs), the upper flash point of n-alkanes and aromatic compounds were measured under the VLE(vapor-liquid equilibrium) state by using Setaflash closed cup tester(ASTM D3278). The UELs calculated by Antoine equation and chemical stoichiometric coefficient tusing the experimental upper flash point were compared with the several reported UELs. From the given results, using the proposed experimental and predicted method, it is possible to research the upper explosion limits of the other flammable substances.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1619-1627
• /
• 2015

The purpose of this study was to examine the relationship between the safety awareness and safety practice behavior of adult learners who participated in "civic safety culture college" was held in Changwon city. We carried out a questionnaire survey that was targeted at 150 citizens, but 132 citizens were included finally. Data collected were analyzed with SPSS 21.0 statistical program. Analysis methods were t-test, one way ANOVA, Scheffe test, Pearsons correlation coefficient, and multiple linear regression. The results were as follows. First, safety awareness point was an average of 4.17 point which was higher levels. Area showing the highest safety awareness was fire safety. Safety practice behavior point was an over intermediate level of an average of 3.58 point. Second, safety practice behavior had statistically significant difference according to sex(t=2.58, p=.01), education(t=-2.57, p=.01), job(t=-1.96, p=.05), housing(t=3.65, p<.001). Third, there was a positive correlation between home safety awareness(r=.28, p<.001), traffic safety awareness(r=.37, p<.001), fire safety awareness(r=.37, p<.001), emergency care awareness(r=.45, p<.001) and safety practice behavior. Fourth, safety practice behavior was related to the emergency care awareness(${\beta}$=.34, p=.002), this factor accounted for 19.5% of the variability of the safety practice behavior. These results are expected to be very important baseline data for many different businesses and program development for strengthening of safety awareness and spreading of safety culture in Changwon city.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.9-15
• /
• 2019

The flash points of DMF based organic solvent mixtures used in the synthetic leather manufacturing process were measured. The test group was composed of seven types of solvent mixtures, which included DMF, toluene, and MEK. Each flash point was tested according to the international standard test methods of KS M 2010. The flash points were then predicted using some prediction models and compared with the measured data. From the analysis results, the binary mixtures with a mole ratio of less than approximately 0.7 showed that the measured values were under 25 ℃. This showed that the expectation for the flammable risk lowering effects due to the mixing of high flash point materials was reduced. In addition, the predicted values were evaluated using the average absolute deviation (A.A.D). The results showed that the Le Chatelier's models had an "A.A.D" of 1.95 ℃ and were the closest to the measured values.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1614-1628
• /
• 2016

The purpose of this study was to examine the relationship between the safety awareness and safety practice of international marriage woman in Kimhae and Changwon city. We carried out a questionnaire survey that was targeted at 138 subjects. Data collected were analyzed with SPSS 21.0 statistical program. Analysis methods were t-test, one way ANOVA, Scheffe test, Perarsons correlation coefficient, and multiple linear regression. The results were as follows. First, safety awareness point was an average of 4.10 point which was higher level. Safety practice point was an over intermediate level of an average of 3.23 point. Second, safety awareness had statistically significant difference according to age, year of Korea residence, born Nation, whether or not Korean citizenshilp, monthly income, temper, satisfaction of marriage. Third, safety practice had statistically significant difference according to housing, monthly income, health state, satisfaction of marriage. Fourth, safety Practice had a positive correlation with home safety awareness, traffic safety awareness, fire safety awareness, and emergency care awareness. Therefore, a higher safety awareness results in having a very well safety practice. Fifth, International Marriage Women from Japan had the highest the level in the Safety Awareness and Safety Practice. From now on, two cities should have a major concern for safety education of fire and emergency care. And the safety education based on learning need analysis need to be done substantially.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.41-41
• /
• 2013

화학산업이 발달함에 따라 화학 산업 현장에서 사용되고 있는 가연성물질들의 여러 가지 화재 및 폭발 위험이 증가되고 있으며, 화재 및 폭발의 예방 안전을 위한 화학공정설계 및 대처에 있어, 물질의 연소특성치 데이터를 필요로 한다. 인화점은 가연성 액체를 다루는 공정에서 안전한 취급과 사고방지를 위해 중요한 자료가 되며, 화재의 위험을 나타내는 지표로서 가연성액체의 액면 가까이서 인화할 때 필요한 증기를 발산하는 액체의 최저온도, 그리고 가연성증기의 포화증기압이 공기와 혼합기체의 폭발한계 하한농도와 같게 되는 온도로 정의한다. 본 연구에서는 2성분계 혼합물에 대해 인화점을 측정하였고, 측정값을 Raoult의 법칙과 다중회귀분석(Multiple Regression)을 도입하여 이론값과 비교 하였다. 따라서 본 연구에서 제시된 방법론에 의해 아직까지 밝혀지지 않은 순수가연성액체와 가연성혼합물의 인화점을 예측하는 방법을 전개하고자 하며, 실험에서 찾고자하는 자료에 도움을 주고자 한다. 본 연구를 바탕으로 혼합물의 인화점 예측 방법과 실험에서 측정한 자료를 화재 및 폭발을 방지하는 기초 자료로 제공하고자하며, 산업현장에서 취급되고 있고 위험성 평가가 되지 않은 보다 많은 물질에 대한 이론 및 실험 연구에 활용 되도록 하는데 그 목적이 있다.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.1-7
• /
• 2015

This paper is aimed to analyze the electrical and thermal signal such as ignition possibility, ignition time, thermal characteristics and arc fault power that are associated with electrical fire in case of the occurrence of series arc at IV wiring used for interior wiring at commercial power source. In order to analyze the signal, series arc was induced by generating the constant vibration through vibrating device in the one phase (R phase) and ignition possibility was analyzed along the condition of current value by adding cotton material to the contact point of wiring. The ignition time is shortened as the electric current value increased, burning time is not associated with current value and the temperature rose up to $740^{\circ}C$ though it was not ignited. It was checked out that the temperature was the energy source enough that can generate the fire related with insulation aging of wiring and the inflammable. The possibility of electrical fire by series arc was shown as more than 12% at 5A, more than 42% at 20A and arc showed 27W at 5A, 180W at 20A. It was confirmed that the possibility of electrical fire exists at the condition as above and the circuit breaker did not operate. This data can be used as the reference value for the investigation of electrical fire or development of the circuit breaker.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.4
• /
• pp.577-588
• /
• 2017

There are many constraints, both economically and ethically that experimenting human evacuation behavior in situations such as fire. Therefore, the evacuation behavior is simulated based on the existing studies. In recent years, the foundation has been established as computer performance advances, models closer to reality can be studied. In this study, the evacuation time in the subway platform was analyzed from modeling human behavior and smoke propagation in a fire. The evacuation efficiency was also examined by dividing the shape of the subway station platform by the stair position and comparing the evacuation times for each platform. As a result, it was found that the side platform was longer than the island platform by 36.82% more time to evacuation. The shape of the stairs is most advantageous in terms of evacuation form side type platform was 210 seconds and island type platform was 186 seconds, when a fire occurs in the center of the platform. And most favorable in location of evacuation stairs were located at 2/5 point and 4/5 from depending on the step location.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.64-73
• /
• 2003

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system Integration of this requires open network with the standard communication protocol and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the open distributed fire alarm signaling system for the integration of BAS and a new intelligent control modules with LonTalk protocol. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation systems. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate integrated building systems.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.99-104
• /
• 2019

In a gas system fire extinguishing system, extinguishing agents are usually stored with approximately 280 bar at $21^{\circ}C$ and are released at approximately 8 MPa through the decompression valve and orifice to quickly suppress the fire. When extinguishing agents are discharged, they cause a loud noise (approximately 140 dB), which can damage electronics, such as hard disk drives (HDDs). Therefore, the noise is becoming a serious issue in the gas extinguishing system. The method of the noise reduction by adding an absorbent is most general and in this study, the thickness of the absorbent was as a selected design variable. The noise level at the observation point and the flow characteristics inside the nozzle were numerically calculated and analyzed using the commercial code ANSYS CFX ver. 18.1.