• 제목/요약/키워드: fire occurrence pattern

검색결과 16건 처리시간 0.018초

강원도 지역 산불발생인자의 지역별 유형화 (Regional Analysis of Forest Eire Occurrence Factors in Kangwon Province)

  • 이시영;한상열;안상현;오정수;조명희;김명수
    • 한국농림기상학회지
    • /
    • 제3권3호
    • /
    • pp.135-142
    • /
    • 2001
  • 이 연구는 강원도 지역의 시계열 기상자료와 산불발생현황자료를 이용하여 시ㆍ군별 산불발생유형을 구분하고자 지역간 기상요인과 발생원인 그리고 산불발생 일을 근거로 한 지역별 유형화 구분을 목적으로 시도되었다. 기상요인에 의한 산불발생 유형화에서는 최근 6년간의 강원도 소재 기상대의 기상자료를 적용하였으며, 지역과 산불발생원인과의 관련성 규명과 산불발생일의 불일치계수를 이용한 수량화된 다차원척도법 유형화에서는 최근 10년간의 산불발생현황자료를 적용하였다. 연구결과를 요약하면 다음과 같다. 첫째, 강원도 동해안산불과 같은 대형산불에 관련되는 기상요인으로는 평균온도, 최저온도, 최저초상온도, 평균풍속, 최대풍속 등으로 규명되었다. 둘째, 산불발생원인과 지역간의 관계를 도식화한 대응일치분석 결과에서는 지역과 산불발생원인과의 관계에서 가장 확연히 구분되는 지역으로는 '강릉'의 경우로 '방화'와 깊은 관련이 있는 것으로 나타났으며, '삼척'은 '입산자실화'와 '철원', '화천', '양구'지역은 군사훈련과 관계하는 것으로 보여지며, '속초'와 '춘천'의 경우에는 '쓰레기 소각'과 '담뱃불'이 타지역보다 밀접한 관련성이 있는 것으로 나타났다. 마지막으로 산화발생일을 근거로 각 시ㆍ군의 산불발생 유사성 정도 및 유형화 구분을 위한 다차원척도법 적용결과에서는 강원도 18개 시ㆍ군 지역이 5개의 유형으로 분류되었는데, 유형 I로 구분된 지역으로는 삼척, 강릉, 춘천, 원주, 홍천, 횡성으로 나타났으며, 유형 Ⅱ는 동해, 태백, 양양, 평창지역, 유형 Ⅲ은 정선, 철원, 화천지역, 유형 Ⅵ는 고성, 인제, 양구지역이, 그리고 마지막으로 유형 V는 속초와 영월지역으로 구분되었다. 지금까지의 도출된 연구결과들은 산불현황자료와 기상자료를 기초로 하여 도출된 결과를 근거로 제시하였고, 지역별 산불발생 특성을 보다 체계적으로 구분하기 위하여는 이외에도 지역별 임상요인과 지형 및 사회적 요인에 대한 검토들이 병행되어야 할 것으로 판단된다.의 경쟁이 생장에 영향을 미치는 것이 사실이다. 따라서 앞으로의 연구에서는 지형, 토양, 미기후 조건, 그리고 임목 간의 경쟁관계가 종합적으로 고려된 환경요인에 의한 생장특성을 파악하는 연구가 필요하다. 아울러 본 연구에서와 같이 지형기후학적 방법에 의하여 추정된 미기후를 통하여 보다 정확한 결과를 얻기 위해서는 무인자동기상관측 망의 설치를 통하여 이를 검증하는 작업이 필요하다.deling of self-similar traffic.ti colored dan have been produced after 1960's. Around the end of 1980's, automatic shuttle change loom have been generalized and 7 color dan(칠색단), 9 color gumsadan (구색금사단) have been current in multi colored dan. In terms of materials, synthetic and chemical textiles had been used widely and alter 1980's most fabrics, of which the ground weave is not being woven with satin-weave but being woven with plain or twill-weave, are named Dan in general.Standards for Livestock Products of Korea". The measured mean concentrations of Ca, Fe, Zn were generally higher than lower limit of labeled value(above 80% of labeled value). The mean concentration of sodium was lower than upper limit of labeled value(below 120% of labeled value).

  • PDF

관측사례로 검증한 영동강풍 발생조건 분석 (Analysis on the Yeongdong Downslope Windstorms Generation Condition Verified by Observation Cases)

  • 박유정;한윤덕
    • 대기
    • /
    • 제31권4호
    • /
    • pp.405-420
    • /
    • 2021
  • Forest fire happens every year at Yeongdong, Gangwon-do, due to the strong local wind during the spring time and it causes a huge damage. This wind is named "Yangganjipung" or "Yanggangjipung" that blows along Yeongdong. However, the occurrence conditions of the wind have been still unclear. To identify the occurrence mechanism of local strong wind through three-dimensional observation data, Gangwon Regional Meteorological Administration performed Joint Gangwon-Yeongdong 3D Observation Project in 2020. The special observation was carried out for 6 times from March to April. The observation data was analyzed by focusing on the structure of synoptic pressure distribution and inversion layer. The result showed that the strength of wind is different depending on the latitude of low pressure, intensity of inversion layer, and changes on height in the south-high and north-low pressure distribution. As the interval of the upper and lower parts of the inversion layer was narrow, the strength of the wind became stronger, which is one of the observational characteristics of the springtime wind pattern at Yeongdong, Gangwon-do. In future, the clear mechanism of the local wind in the Yeongdong during the spring time is expected to be verified based on the accumulative observation data and close analysis.

층간 단락된 3상 몰드변압기의 소손 패턴 및 금속 조직 해석 (Analysis of the Damage Patterns and Metal Structure of 3 Phase Mold Transformers to which Interlayer Short-circuits have Occurred)

  • 최충석
    • 한국안전학회지
    • /
    • 제25권6호
    • /
    • pp.86-91
    • /
    • 2010
  • The purpose of this study is to analyze the damage patterns and metal structure of 3 phase mold transformers collected from places where accidents have occurred. Compared to an oil-immersed transformer, a mold transformer has the advantage of requiring a smaller installation area and can be kept clean, while its disadvantages include the fact that abnormal symptoms of an accident are difficult to discover and its repair is impossible. The capacity of the mold transformers collected from places where accidents have occurred was 200kVA with primary voltages being F23,900V, R22,900V, 21,900V, 20,900V, 19,900V, etc., as well as secondary voltages being 380V, 220V, etc. It was found from the analysis on the diffusion of combustion in the damaged mold transformers that fire occurred first inside the U-phase primary winding and that carbonization and heat were diffused to V-phase and W-phase in V-pattern. In addition, from the analysis on the cross-sectional structure of the metal of the melted high voltage winding using a metallurgical microscope, it was found that the boundary surface, voids, and columnar structure were formed when an interlayer short-circuit had occurred Therefore, even though it is not possible to find the cause for the occurrence of an interlayer short-circuit at the inner side of the primary winding, it is thought that, due to the thermal energy generated when the short-circuit occurred, the heat source was diffused to the upper side and outside, causing a secondary accident.

교통이벤트 정보의 자동 전송시스템 구현 (An Implementation of Automatic Transmission System of Traffic Event Information)

  • 정영래;장재훈;강석근
    • 한국전자통신학회논문지
    • /
    • 제13권5호
    • /
    • pp.987-994
    • /
    • 2018
  • 본 논문에서는 교통정보의 자동 전송시스템에 대한 연구결과를 제시한다. 여기서는 구급차나 소방차와 같은 긴급차량의 진로를 방해하는 것을 교통이벤트로 정의한다. 차량 내부에 설치된 블랙박스에 기록되는 동영상으로부터 교통이벤트 발생이 판정되는 경우 해당 정보를 증거영상과 함께 전자우편을 통하여 자동적으로 관제선터에 전송하는 시스템을 구현하였다. 이를 위하여, 전방에서 주행하는 차량의 번호판으로부터 문자와 숫자를 인식하는 알고리즘, 교통이벤트 발생 판정알고리즘을 실현하였다. 또한, 신고를 위하여 텍스트와 영상 파일을 전자우편과 파일전송프로토콜을 통하여 자동 전송하는 기능도 추가하였다. 따라서 교통이벤트를 확장하여 제시된 시스템에 적용하면 다양한 교통법규 위반 사항에 대한 편리한 신고체계를 수립할 수 있으므로 교통법규 위반 사례를 크게 줄일 수 있을 것으로 판단된다.

하우징 형태(Housing Type)로 제작된 배선 연결 커넥터의 안전성 평가에 관한 연구 (A Study on the Safety Estimation of Wiring Connection Connector Manufactured by Housing Type)

  • 최충석
    • 전기학회논문지P
    • /
    • 제59권4호
    • /
    • pp.462-466
    • /
    • 2010
  • The purpose of this study is to evaluate the safety of a wire connector fabricated for the effective installation of a lighting fixture including its contact resistance, insulation resistance, withstanding voltage characteristics, etc., and to provide the basis for the analysis and judgment of PL(Product Liability) dispute by presenting a damage pattern due to a general flame and overcurrent. This study applied the Korean Standard (KS) for the incombustibility test of the connector using a general flame and performed an overcurrent characteristics test of the connector using PCITS (Primary Current Injection Test System). The contact resistance of the housing connector was measured using a high resistance meter and the insulation resistance was measured using a multimeter. In addition, a supply voltage of AC 1,500V for testing the withstanding voltage characteristics was applied to both ends of the connector. Measurement was performed on 5 specimens and the measured values were used as a basis for judgment. Since the connector is fabricated in the form of a housing, it can be connected and separated easily and has a structure that allows no foreign material to enter. In addition, since it has a structure that allows wires to be connected only when their polarity is identical, any misconnection that may occur during installation can be prevented. When the incombustibility test was performed by applying a general flame to the connector, it showed outstanding incombustibility characteristics and the blade and blade holder connected to the housing remained firmly secured even after the insulation sheath (PVC) was completely destroyed by fire. In addition, the mechanism of the damaged connecting wire showed a comparatively uniform carbonization pattern and it was found that some residual melted insulation material was attached to both ends. In the accelerated life test (ALT) to which approximately 500% of the rated current was applied, the connector damage proceeded in the order of white smoke generation, wire separation, spark occurrence and carbonization. That is, it could be seen that the connector damaged by overcurrent lost its own metallic color with traces of discoloration and carbonization. The contact resistance of the connector at a normal state was 2.164mV/A on average. The contact resistance measured after the high temperature test was 3.258mV/A. In addition, the insulation resistance after the temperature test was completed was greater than $10G\Omega$ and the withstanding voltage test result showed that no insulation breakdown occurred to all specimens showing stable withstanding voltage and insulation resistance characteristics.

진주시 교통사고의 도시공간분포패턴 분석 (Pattern Analysis for Urban Spatial Distribution of Traffic Accidents in Jinju)

  • 성병준;유환희
    • 대한공간정보학회지
    • /
    • 제22권3호
    • /
    • pp.99-105
    • /
    • 2014
  • 교통사고는 화재와 더불어 도시지역에서 발생하는 인위적 재해 중 가장 높은 비중을 차지하고 있어서 보다 과학적인 원인분석과 더불어 다양한 예방대책수립이 필요하다. 본 연구에서는 지방중소도시인 진주시를 대상으로 2013년 발생한 교통사고 데이터를 교통사고 발생 원인별 분석, 발생 시간 및 계절적 특성분석 등 위치정보와 연계하여 시공간적 분포특성을 분석하고 토지이용계획에 따른 도시공간개발 특성과 연계함으로서 교통사고와의 공간적 상관성을 분석하였다. 그 결과 사고유형별 사고 분포특성을 보면 측면직각추돌(차 대 차), 횡단중사고(차 대 사람)가 밀도분석과 최근린분석에서 가장 군집도가 높았으며, 중심상업지역과 고밀도 주거지역, 공업지역을 연결하는 도로상에서 가장 많이 발생하는 특성을 보였다. 또한 피해상황에서는 인적피해가, 기상상태에서는 맑은 날이, 노면상태는 건조할 때가, 도로형태는 삼지교차로 일 때가 가장 높은 군집도를 보여주었다.