• Bulletin of the Korean Mathematical Society
• /
• v.61 no.2
• /
• pp.511-517
• /
• 2024

Let (M, p) denote a noncompact manifold M together with arbitrary basepoint p. In [7], Kondo-Tanaka show that (M, p) can be compared with a rotationally symmetric plane M_m in such a way that if M_m satisfies certain conditions, then M is proved to be topologically finite. We substitute Kondo-Tanaka's condition of finite total curvature of M_m with a weaker condition and show that the same conclusion can be drawn. We also use our results to show that when M_m satisfies certain conditions, then M is homeomorphic to ℝⁿ.

• Bulletin of the Korean Mathematical Society
• /
• v.26 no.2
• /
• pp.175-177
• /
• 1989

The following is the basic problem about the stability in Riemannian Geometry; given a Riemannian manifold N, find all stable complete minimal submanifolds of N. As answers of this problem, do Carmo-Peng [1] and Fischer-Colbrie and Schoen [3] showed that the stable minimal surfaces in R$^{3}$ are planes and Schoen-Yau [5] and Fischer-Colbrie and Schoen [3] gave a solution for the case where the ambient space is a three dimensional manifold with nonnegative scalar curvature. In this paper we will remove the assumption of finite absolute total curvature in [3, Theorem 3].

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.5
• /
• pp.1089-1099
• /
• 2012

We construct three kinds of complete embedded singly-periodic minimal surfaces in $\mathbb{H}^2{\times}\mathbb{R}$. The first one is a 1-parameter family of minimal surfaces which is asymptotic to a horizontal plane and a vertical plane; the second one is a 2-parameter family of minimal surfaces which has a fundamental piece of finite total curvature and is asymptotic to a finite number of vertical planes; the last one is a 2-parameter family of minimal surfaces which fill $\mathbb{H}^2{\times}\mathbb{R}$ by finite Scherk's towers.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.6
• /
• pp.61-70
• /
• 2010

This study presents free vibration analyses of perforates steel plates with various cutouts. Four different parameters (shape, size, curvature radius ratio, and rotation of cutouts) were considered to investigate the effects of those parameters on the free vibration characteristics, such as natural frequencies of the perforated steel plates. Three different shapes of cutouts are circle, square, and triangle, and the considered sizes are 5, 10, 15, 20, and 25 mm. For the triangular and square cutouts, the characteristic radii of the inscribed circles of those cutouts were defined. In addition, the curvature radius ratio was defined as the ratio of curvature radius of bluntness and the characteristic radius. Then, total seven different curvature radius ratios (0, 0.1, 0.3, 0.5, 0.7, 0.9, and 1) were considered. To investigate the rotation effect of the cutouts, it was considered four rotations ($0^{\circ}$, $15^{\circ}$, $30^{\circ}$, and $45^{\circ}$) for the square cutouts and three rotations (0, 15, and 30) for the triangular cutouts. All the free vibration analyses were conducted using a general purpose finite element program. From the analyses we found that the most influential parameter for the free vibration response of the perforated plates is the size of cutout. The other factors such as the shape, curvature radius ratio, and rotation are minors; they mainly change the natural frequency as long as the size effect is accompanied.

• The Pure and Applied Mathematics
• /
• v.17 no.4
• /
• pp.299-306
• /
• 2010

In this article we consider axes of a complete embedded minimal surface in $R^3$ of finite total curvature, and then prove that there is no planar ends at which the Gauss map have the minimum branching order if the minimal surface has a single axis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2694-2703
• /
• 1993

In the vibration analysis of Timoshenko beams by the finite element method, it is necessary to use a large number of elements or higher-order elements in modeling thin beams. This is because the overestimated stiffness matrix due to the shear locking phenomenon when lower-order displacement-based elements are used yields poor eigensolutions. As a result, the total number of degrees of freedom becomes critical in view of computational efficiency. In this paper, the curvature-based formulation is applied to the vibration problem. It is shown that the curvaturebased beam elements are free of shear locking and very efficient in the vibration analysis.

• Steel and Composite Structures
• /
• v.10 no.4
• /
• pp.297-315
• /
• 2010

This paper is concerned with free vibration characteristics and natural frequency of horizontally curved composite plate girder bridges. Three-dimensional finite element models are developed for the girders using the software package LUSAS and analyses carried out on the models. The validity of the finite element models is first established through comparison with the corresponding results published by other researchers. Studies are then carried out to investigate the effects of total number of girders, number of cross-frames and curvature on the free vibration response of horizontally curved composite plate girder bridges. The results confirm the fact that bending modes are always coupled with torsional modes for horizontally curved bridge girder systems. The results show that the first bending mode is influenced by composite action between the concrete deck and steel beam at low subtended angle but, on the girders with larger subtended angle at the centre of curvature such influence is non-existence. The increase in the number of girders results in higher natural frequency but at a decreasing rate. The in-plane modes viz. longitudinal and arching modes are significantly influenced by composite action and number of girders. If no composite action is taken into account the number of girders has no significant effect for the in-plane modes.

• Structural Engineering and Mechanics
• /
• v.13 no.6
• /
• pp.713-730
• /
• 2002

This paper presents a finite element approach for determining the natural frequencies for planar inclined arches of various shapes vibrating in three-dimensional space. The profile of inclined arches, represented by undeformed centriodal axis of cross-section, is defined by the equation of plane curves expressed in the rectangular coordinates which are : circular, parabolic, sine, elliptic, and catenary shapes. In free vibration state, the arch is slightly displaced from its undeformed position. The linear relationship between curvature-torsion and axial strain is expressed in terms of the displacements in three-dimensional space. The finite element discretization along the span length is used rather than the total are length. Numerical results for arches of various shapes are given and they are in good agreement with those reported in literature. The natural frequency parameters and mode shapes are reported as functions of two nondimensional parameters: the span to cord length ratio (e) and the rise to cord length ratio (f).

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.169-176
• /
• 1999

An improved formulation for spatial stability md free vibration of thin-walled curved beams with variable curvature and non-symmetric cross sections are presented based on the displacement field considering the second order terms of finite semitangential rotations. By introducing Vlasov's assumptions, the total potential energy is derived from the principle of linearized virtual work for a continuum. In this formulation, all displacement parameters and the warping function are defined at the centroid axis so that the coupled terms of bending and torsion are added to the elastic strain energy. Also, the potential energy due to initial stress resultants is consistently derived corresponding to the semitangential rotation and moment. The cubic Hermitian polynomials are utilized as shape functions for development of the curved thin-walled beam element having eight degrees of freedom. In order to illustrate the accuracy and practical usefulness of this study, . numerical solutions for free vibration of arches are presented and compared with resells of other researchers and solutions analyzed by the ABAQUS's shell element.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.515-516
• /
• 2006

The goal of total disc replacement is to restore pain-free mobility to a diseased functional spinal unit, by replacing the degenerated disc with a mobile bearing prosthesis. SB Charite III is named commercial product as the Artificial Intervertebral Disc (AID). SB Charite III consists of sliding core and endplate made by Ultra-high Molecular Weight Polyethylene (UHMWPE) and cobalt chrome alloy, respectively. To evaluate the effect of von-Mises stress in AID, and three-dimensional finite element model of AID analysis was preformed for four different loading types of sliding core. Consequently, endplate was compared with a compressive preload at 400N and flexion moment at $3{\sim}9Nm4. Therefore, this research has obtained result that von-Mises stress of sliding core in AID disc by radius curvature.