• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.173-176
• /
• 1999

Frequency responses of the surface acoustic wave(SAW) filters are simulated by using the impulse modeling. The simulation technique of the SAW filters is to use the Fourier transformation to make a correspondence between the impulse response of the filter and the taps in the delay line. Since the Fourier series must be truncated after a finite number of terms, window functions are often used to weight the coefficients to obtain the desirable side-lobe level and bandwidth. The filter design is operated through the iterative simulation procedures. The design process is capable of yielding filters with optimized frequency response characteristics.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.265-272
• /
• 1997

In this paper the bending collapse characteristics of 60 series Al rectangular tubes were studied with a pure bending collapse test rig which could apply the pure bending moment, there occured three kinds of bending collapse modes - local buckling, delayed buckling, tensile failure - depending on the b/t(width/thickness) ratio and material properties. Experiment results are compared with the results of finite element method.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.127-134
• /
• 2006

Based on a weakly non-Gaussian theory the occurrence probability of freak waves is formulated in terms of the number of waves in a time series and the surface elevation kurtosis. Finite kurtosis gives rise to a significant enhancement of freak wave generation in comparison with the linear narrow banded wave theory. For fixed number of waves, the estimated amplification ratio of freak wave occurrence due to the deviation from the Gaussian theory is 50% - 300%. The results of the theory are compared with laboratory and field data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.406-410
• /
• 1990

This paper presents an approximate analysis of the serial production lines using decomposition technique. A serial production line consists of a series of unreliable machines separated by finite buffers. The serial production line is evaluated by approximation method, the results of which are compared with those examined by the discrete time event simulation, based on this approximation method, a gradient technique is proposed, which improves the efficiency of an operation of production line through the re-allocation of buffers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.115-119
• /
• 1987

In this paper the observer design problem in bilinear systems is studied using the Walsh functions as approximating set of functions to find a finite series expansion of the state of bilinear system. A classical Liapnove method, to finding a class of observer feedback matrix, is applied to ensure uniform asymptotic stability of the observation error dynamics. An algorithm is derived for observer state eq. via Walsh function. The basic objective is to develop a computational algorithm for the determination of the coefficients in the expansion. This approach technique gives satisfactory result as well provides precise and effective method for the bilinear observer design problem.

• 전자공학회논문지D
• /
• 제34D권7호
• /
• pp.8-14
• /
• 1997

The phusical optics approximation to an E-polarized diffraction by a composite wedge provides its diffraction coefficients in terms of finite series of cotangent functions. In this paper, its diffraction coefficients inside the dielectric part are extended to become the exact solution to the perfectly conducting wedge as its relative dielectric constant increases to infinite or decreases to 1. It is assured that the extended diffraction coefficients satisfy the boundary condition at th econducting interface and become zero in the artificially complementary region of the composite wedge.

• Journal of applied mathematics & informatics
• /
• 제28권5_6호
• /
• pp.1157-1169
• /
• 2010

This paper presents the analytical solution of the fractional Fokker-Planck equation by Adomian decomposition method. By using initial conditions, the explicit solution of the equation has been presented in the closed form and then the numerical solution has been represented graphically. Two different approaches have been presented in order to show the application of the present technique. The present method performs extremely well in terms of efficiency and simplicity.

• Computers and Concrete
• /
• 제1권3호
• /
• pp.325-354
• /
• 2004

Slabs in buildings and bridge decks, which are restrained against lateral displacements at the edges, have ultimate strengths far in excess of those predicted by analytical methods based on yield line theory. The increase in strength has been attributed to membrane action, which is due to the in-plane forces developed at the supports. The benefits of compressive membrane action are usually not taken into account in currently available design methods developed based on plastic flow theories assuming concrete to be a rigid-plastic material. By extending the existing knowledge of compressive membrane action, it is possible to design slabs in building and bridge structures economically with less than normal reinforcement. Recent research on building and bridge structures reflects the importance of membrane action in design. This paper describes the finite element modelling of membrane action in reinforced concrete slabs through optimisation of a simple concrete model. Through a series of parametric studies using the simple concrete model in the finite element simulation of eight fully clamped concrete slabs with significant membrane action, a set of fixed numerical model parameter values is identified and computational conditions established, which would guarantee reliable strength prediction of arbitrary slabs. The reliability of the identified values to simulate membrane action (for prediction purposes) is further verified by the direct simulation of 42 other slabs, which gave an average value of 0.9698 for the ratio of experimental to predicted strengths and a standard deviation of 0.117. A 'deflection factor' is also established for the slabs, relating the predicted peak deflection to experimental values, which, (for the same level of fixity at the supports), can be used for accurate displacement determination. The proposed optimised concrete model and finite element procedure can be used as a tool to simulate membrane action in slabs in building and bridge structures having variable support and loading conditions including fire. Other practical applications of the developed finite element procedure and design process are also discussed.

• Computers and Concrete
• /
• 제32권5호
• /
• pp.487-498
• /
• 2023

The present study investigated the flexural behavior of reinforced concrete (RC) beams strengthened with an ultrahigh performance concrete (UHPC) panel having various thicknesses. Two fabrication methods were introduced in this study; one was the direct casting of UHPC onto the bottom surface of the RC beams (I-series), and the other was the attachment of a prefabricated UHPC panel using an adhesive (E-series). UHPC panels having thicknesses of 10, 30, 50, and 70 mm were applied to RC beams, and these specimens were subjected to four-point loading to assess the effect of the UHPC thickness on the flexural strengthening of RC beams. The test results indicated that the peak strength and initial stiffness were vastly enhanced with an increase in the thickness of the UHPC panel, showing an improved energy dissipation capacity. In particular, the peak strength of the E-series specimens was higher than that of I-series specimens, showing high compatibility between the RC beam and the UHPC panel. The experimental test results were comparatively explored with a discussion of numerical analysis. Numerical analysis results showed that the predictions are in fair agreement with experimental results.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.809-815
• /
• 2014

최근들어 원자력 발전소에 유도 가열 공정으로 굽힌 배관을 적용하려는 동향이 있다. 이러한 유도 가열 굽힘 공정 동안의 열-기계적 메커니즘에 의해 잔류응력이 발생할 수 있다. 잔류응력은 균열 발생과 성장에 중요한 영향을 미치는 균열 구동력들 중의 하나이다. 그러나, 기존 연구들은 두께 변화, 타원도와 같은 기하학적 형상 변이에 집중하고 있는 반면 공정 변수가 잔류응력에 미치는 영향과 관련된 연구는 찾아보기 힘들다. 본 연구에서는 316 오스테나이트 스테인리스 강으로 제작된 유도 가열 굽힘 배관의 잔류응력 분포에 미치는 공정 변수의 영향을 유한요소 변수 해석을 통해 고찰하였다. 고찰결과, 굽힘 모멘트와 굽힘 각도는 잔류응력에 미치는 영향이 미미한 반면 유도 가열률과 이송 속도는 잔류응력에 상당한 영향을 미침을 확인하였다.