• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.306-313
• /
• 2000

The homogenization method and the density function method are common approaches to evaluate the equivalent material properties for design cells composed of matter and void. In this research, using a new topology optimization method based on the homogenized material with a penalty factor and the chessboard prevention strategy, we obtain the optimal layout of a structure for the natural frequency of a designated mode. The volume fraction of nodes of each finite element is chosen as the design variable and a total material usage constraint is imposed. In this paper, the subspace method is used to evaluate the eigenvalue and its corresponding eigenvector of the structure for the designated mode and the recursive quadratic programming algorithm, PLBA algorithm, is used to solve the topology optimization problem.

• Structural Engineering and Mechanics
• /
• v.34 no.4
• /
• pp.417-447
• /
• 2010

The uncertainty often observed in experimental strengths of masonry constituents makes critical the selection of the appropriate inputs in finite element analysis of complex masonry buildings, as well as requires modelling the building ultimate load as a random variable. On the other hand, the utilization of expensive Monte Carlo simulations to estimate collapse load probability distributions may become computationally impractical when a single analysis of a complex building requires hours of computer calculations. To reduce the computational cost of Monte Carlo simulations, direct computer calculations can be replaced with inexpensive Response Surface (RS) models. This work investigates the use of RS models in Monte Carlo analysis of complex masonry buildings with random input parameters. The accuracy of the estimated RS models, as well as the good estimations of the collapse load cumulative distributions obtained via polynomial RS models, show how the proposed approach could be a useful tool in problems of technical interest.

• Structural Engineering and Mechanics
• /
• v.30 no.1
• /
• pp.99-117
• /
• 2008

This paper presents a comprehensive approach to the evaluation of macroscopic material parameters for natural stone and quarry masonry. To that end, a reliable non-linear material model on a meso-scale is developed to cover the random arrangement of stone blocks and quasi-brittle behaviour of both basic components, as well as the impaired cohesion and tensile strength on the interface between the blocks and mortar joints. The paper thus interrelates the following three problems: (i) definition of a suitable periodic unit cell (PUC) representing a particular masonry structure; (ii) derivation of material parameters of individual constituents either experimentally or running a mixed numerical-experimental problem; (iii) assessment of the macroscopic material parameters including the tensile and compressive strengths and fracture energy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1779-1786
• /
• 2002

When the topology optimization is applied to the design of compliant mechanism, unexpected displacements of input and output port are generated since the displacement control is not included in the formulation. To devise a more precise mechanism, displacement constraint is formulated using the mutual potential energy concept and added to multi-objective function defined with flexibility and stiffness of a structure. The optimization problem is resolved by using Finite Element Method(FEM) and Sequential Linear Programming(SLP). Design examples of compliant mechanism with displacement constraint are presented to validate the proposed design method.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.25-29
• /
• 2006

Analysis of structures which are composed of numerous repeated unit structures can be simplified by using homogenized properties. If the unit structure is repeated in one direction, the whole structure may be regarded as a beam. Once the effective stiffness is obtained from the analysis of the unit structure in a proper way, the effort for the detail modeling of the global structure is not required, and the real structure can be replaced simply with a beam. This study proposes a kinematical periodicity constraint to be imposed on the FE model of the unit structure, which improves the accuracy of the effective stiffness. The method is employed to a one dimensionally arrayed 3D structure containing periodically repeated unsymmetrical holes. It is demonstrated that the deformation behavior of the homogenized beam agrees well with that of the real structure.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1413-1418
• /
• 2003

In this study, the topology optimization is applied to the design of a piezoelectric microactuator satisfying the specific mean transduction ratio(MTR). The optimization problem is formulated to minimize the difference between the specified and the current mean transduction ratio. In order to analyze the response of the piezoelectric-structure coupled system, both the structural and the electric potential are considered in the finite element method. The optimization problem is resolved by using Sequential Linear Programming(SLP) and the results of test problems show that the design of a piezoelectric microactuator with specified mean transduction ratio can be obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.67-67
• /
• 2004

다공성 물질을 건조하거나 습한 환경에 노출시키면 열과 수분이 외부로 전달된다. 열 및 수분 전달로 인한 은도 및 습도의 변화는 물질 체적을 변화시켜 습열 응력을 유발시킨다 즉 다공성 제품의 품질은 외양뿐만 아니라 건조 공정 시의 온도, 수분함유량, 응력, 변형률 등의 공정변수에 크게 영향을 받는다. 최근까지도 다공성 물질의 생산 공정은 다수의 공정변수를 갖는 복합공정이기 때문에 이들의 영향을 정량적으로 평가하는 것은 매우 까다로워 현장 경험에 기초한 기술자의 노하우에 의존해 왔다.(중략)

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.67-74
• /
• 2011

In this study numerical analysis was performed to evaluate the safety of Built-in Timbering Roof Type Tunnelling Method(BTR) which is one of non-opening tunnel construction methods. For the upgrading of analytical precision was applied the discretion method which can separately model reinforcing elements of BTR and the homogeneity analysis considering the area ratio of elements was performed to compare both results. Comparing the displacement in this study with that of the homogeneity method, the efficiency of the discretion method was verified.

• Advances in biomechanics and applications
• /
• v.1 no.2
• /
• pp.111-126
• /
• 2014

The microarchitecture of trabecular bone plays a significant role in mechanical strength due to its load-bearing capability. However, the complexity of trabecular microarchitecture hinders the evaluation of its morphological characteristics. We therefore propose a new classification method based on static multiscale theory and dynamic finite element method (FEM) analysis to visualize a three-dimensional (3D) trabecular network for investigating the influence of trabecular microarchitecture on load-bearing capability. This method is applied to human vertebral trabecular bone images obtained by micro-computed tomography (micro-CT) through which primary trabecular bone is successfully visualized and extracted from a highly complicated microarchitecture. The morphological features were then analyzed by viewing the percolation of load pathways in the primary trabecular bone by using the stress wave propagation method analyzed under impact loading. We demonstrate that the present method is effective for describing the morphology of trabecular bone and has the potential for morphometric measurement applications.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.2
• /
• pp.206-213
• /
• 2004

In this study, the topology optimization is applied to the design of a piezoelectric microactuator satisfying the specific mean transduction ratio(MTR). The optimization problem is formulated to minimize the difference between the specified and the current mean transduction ratio. In order to analyze the response of the piezoelectric-structure coupled system, both the structural and the electric potential are considered in the finite element method. The optimization problem is resolved by using Sequential Linear Programming(SLP) and the results of test problems show that the design of a piezoelectric microactuator with the specified mean transduction ratio can be obtained.