• Steel and Composite Structures
• /
• 제11권5호
• /
• pp.359-374
• /
• 2011

In this paper, the influence of fibre orientation and aspect ratio on stability analysis of simply supported skew plates subjected to in plane loading is studied by using a four noded hybrid plate finite element. The formulation of the element is based on Hellinger-Reissner variational principle. The element is developed by combining a hybrid plane stress element and a hybrid plate element. Some numerical problems are solved and the effects of skew angle, aspect ratio, fibre orientation and loading type on the critical buckling loads are highlighted.

• 한국공간구조학회논문집
• /
• 제6권3호
• /
• pp.77-86
• /
• 2006

본 논문은 횡하중을 받는 냉간성형 ㄷ 형강보의 응력해석에 관해 다루고 있다. 냉간형강 보에 가해지는 각 하중 레벨에서의 응력을 계산하여 국부좌굴과 횡좌굴을 고려하여 구조해석을 실시하였다. 해석모델은 박벽보의 기본이론에 의해 유도되었으며 1차원 보요소 유한요소해석을 통하여 수치해석을 하였다. 수치해석결과는 AISI 규준과 비교되었으며, 본 연구에서 제안된 해석모델이 냉간형강보의 처짐뿐 아니라 응력도 매우 정확히 예측함을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제44권1호
• /
• pp.109-125
• /
• 2012

Post-buckling behavior of Timoshenko beams subjected to uniform temperature rising with temperature dependent physical properties are studied in this paper by using the total Lagrangian Timoshenko beam element approximation. The beam is clamped at both ends. In the case of beams with immovable ends, temperature rise causes compressible forces end therefore buckling and post-buckling phenomena occurs. It is known that post-buckling problems are geometrically nonlinear problems. Also, the material properties (Young's modulus, coefficient of thermal expansion, yield stress) are temperature dependent: That is the coefficients of the governing equations are not constant in this study. This situation suggests the physical nonlinearity of the problem. Hence, the considered problem is both geometrically and physically nonlinear. The considered highly non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. The beams considered in numerical examples are made of Austenitic Stainless Steel (316). The convergence studies are made. In this study, the difference between temperature dependent and independent physical properties are investigated in detail in post-buckling case. The relationships between deflections, thermal post-buckling configuration, critical buckling temperature, maximum stresses of the beams and temperature rising are illustrated in detail in post-buckling case.

• Steel and Composite Structures
• /
• 제15권5호
• /
• pp.481-505
• /
• 2013

This paper focuses on thermal post-buckling analysis of functionally graded beams with temperature dependent physical properties by using the total Lagrangian Timoshenko beam element approximation. Material properties of the beam change in the thickness direction according to a power-law function. The beam is clamped at both ends. In the case of beams with immovable ends, temperature rise causes compressible forces and therefore buckling and post-buckling phenomena occurs. It is known that post-buckling problems are geometrically nonlinear problems. Also, the material properties (Young's modulus, coefficient of thermal expansion, yield stress) are temperature dependent: That is the coefficients of the governing equations are not constant in this study. This situation suggests the physical nonlinearity of the problem. Hence, the considered problem is both geometrically and physically nonlinear. The considered highly non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. In this study, the differences between temperature dependent and independent physical properties are investigated for functionally graded beams in detail in post-buckling case. With the effects of material gradient property and thermal load, the relationships between deflections, critical buckling temperature and maximum stresses of the beams are illustrated in detail in post-buckling case.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.647-656
• /
• 2017

This paper presents an experimental study on the behaviour of steel beams with different types of web openings. Steel beams with web openings became progressively more accepted as a well-organized structural form in steel construction since their existence. Their complicated design and profiling method provides better flexibility in beam proportioning for strength, depth, size and location of holes. The objective of this study is to carry out the experiments on steel beams with different types of web openings and performed non-linear finite element (FE) analysis of the beams that were considered in the experimental study in order to determine their ultimate load capacity and failure modes for comparison. Ten full scale models of steel beam with web openings have been tested in the experimental investigation. The finite element method has been used to predict their entire response to increasing values of external loading until they lose their load carrying capacity. FE model of each specimen that is utilized in the experimental studies is carried out. These models are used to simulate the experimental work to verify test results and to investigate the nonlinear behaviour of failure modes such as local buckling, lateral torsional buckling, web-post buckling, shear buckling and Vierendeel bending of beams.

• 전산구조공학
• /
• 제10권4호
• /
• pp.205-216
• /
• 1997

구속된 ?(restrained warping)효과를 고려하는 박벽 공간뼈대구조의 횡후좌굴거동을 조사하기 위하여 기하학적 비선형 유한요소이론 및 해석법을 제시한다. 가상일의 원리를 이용하여 대변형효과를 고려한 3차원 연속체의 평형방정식으로부터, 구속된 ?효과를 고려하고 유한한 회전각의 2차항의 효과를 포함하는 변위장을 도입하여 초기응력을 받는 박벽 공간뼈대요소의 증분평형방정식을 유도한다. 박벽 공간뼈대구조를 유한요소로 나누고 변위장을 요소변위에 관한 Hermitian 다항식으로 나타내어 이를 평형방정식에 대입함으로써 접선강도행렬을 유도한다. 또한 updated Lagrangian formulation에 근거하여, 증분변위로부터 강체회전변위와 순수변형성분을 분리시켜서 강체회전은 요소의 방향변화를 결정하고, 순수변형은 부재력증분을 산정하는 불평형하중 산정법을 제시한다. 박벽 공간뼈대구조의 횡-비틂좌굴 및 후좌굴 거동에 대한 예제들을 통하여 본 연구에 대한 해석결과와 문헌의 결과를 비교 검토함으로써 본 연구에서 제시된 이론 및 해석방법의 정당성을 입증한다.

• Computers and Concrete
• /
• 제25권4호
• /
• pp.283-291
• /
• 2020

The present paper researches post-buckling behaviors of geometrically imperfect concrete beam resting on elastic foundation reinforced with graphene oxide powders (GOPs) based on finite element method (FEM). Distribution of GOPs are considered as uniform and linearly graded through the thickness. Geometric imperfection is considered as first buckling mode shape of the beam, the GOP reinforced beam is rested in initial position. The material properties of GOP reinforced composite have been calculated via employment of Halpin-Tsai micromechanical scheme. The provided refined beam element verifies the shear deformation impacts needless of any shear correction coefficient. The post-buckling load-deflections relations have been calculated via solving the governing equations having cubic non-linearity implementing FEM. Obtained findings indicate the importance of GOP distributions, GOP weight fraction, matrix material, geometric imperfection, shear deformation and foundation parameters on nonlinear buckling behavior of GOP reinforced beam.

• 전산구조공학
• /
• 제8권3호
• /
• pp.79-89
• /
• 1995

본 논문에서는 평판 두께 방향의 선형 및 비선형 응력 분포를 일정한 크기의 단순응력 상태로 가정하는 분할판(Two-element plate) 개념을 이용하여 비선형 특성을 나타내는 평판의 강도해석을 할 수 있는 Reissner 범함수와, 재질 특성은 선형이면서 기하학적 비선형 특성만을 갖는 평판의 강도해석을 할 수 있는 변형 Reissner 범함수를 모델링하였다. 두 종류의 Reissner 범함수들을 근거로 하여 축방향 하중을 받는 평판의 선형 좌굴과 좌굴후의 비선형 특성 및 최대강도들을 계산할 수 있는 유한요소 방정식과 프로그램 개발을 시도하였다. 개발한 프로그램을 이용한 수치해석 결과, 분할판 이론을 사용한 선형좌굴해석 결과가 기존의 평판이론을 사용한 선형좌굴해석 결과와 유사항 경향을 나타냄으로써 분할판 이론에 근거한 유한요소법을 하중과 경계조건 및 구성재질이 다양한 일반적인 평판의 강도해석에 확대 적용함은 물론 좌굴후 비선형재질 특성으로 인한 평판의 최대강도도 예측 가능하다고 생각한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.677-680
• /
• 2004

This study investigates the buckling evaluation of connecting rods used in the diesel engine through finite element analysis. The Rankine formula, which is modified from classical Euler‘s formula, has been widely accepted in automotive industry to evaluate the buckling of connecting rods. Apparently, this formula is most suitable for the straight and idealized rod shape, and over-simplifies the geometric complexity associated with connecting rods. The subspace iteration method in FEA is used to predict the critical buckling stress of a connecting rod with certain slenderness ratio. To create models with various slenderness ratios for shank portion in the rod, the automatic meshing preprocessor was implemented. Results from FEA were verified by the experiments, in which the embedded strain gages measured for the connecting rod running at 4000rpm. The result indicates that the buckling prediction curve through FEA and experiment is effectively different from the curve of classical Rankine formula.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.16-21
• /
• 1990

Recently, the finite element method has been sucessfully extended to treat the rather couplet phenomena such as nonlinear buckling problems which are of considerable practical interest. In this study, a finite element program to evaluate the elasto-plastic buckling stress is developed. The Stowell's deformation theory for the plastic buckling of flat plates, which is in good agreement with experimental results, is used to evaluate bending stiffness matrix. A bifurcation analysis is performed to compute the elasto-plastic buckling stress. The subspace iteration method is employed to find the eigenvalues. The results are compared with corresponding enact solutions to the governing equations presented by Stowell and also with experimental data due to Pride. The developed program Is applied to obtain elastic and elasto-plastic buckling stresses for various loafing cases. The effect of different plate aspect ratio is also investigated.