• 한국화재소방학회논문지
• /
• 제28권6호
• /
• pp.8-12
• /
• 2014

현행 건축법은 건축물의 규모, 용도에 따라 화재확산방지와 재실자의 보호를 위하여 실내 마감 재료를 불연, 준불연, 난연재료로 시공하도록 규정하고 있으며, 가스 유해성 시험(KS F 2271)에 따라 해당 시료의 연소 생성물에 노출된 실험용 쥐의 평균행동정지시간을 측정하여 연소 생성물의 유해성을 평가하고 있다. 실험용 쥐를 대상으로 가스상, 입자상 물질의 복합적 유해효과를 분석한 결과인 평균행동정지시간이 15분의 노출 시험 중 9분 이내로 측정된 경우, 연소 유해성 평가 결과가 부적합한 것으로 판정한다. 이에 본 연구에서는 연소 생성물에 포함된 가스상, 입자상 물질 중에서 실험용 쥐의 행동정지에 미치는 영향이 큰 요소를 규명하기 위하여 연소 생성물에 포함된 입자상 물질의 입도 분석을 실시하여 위험도의 상관관계를 밝혔다.

• 대한핵의학회지
• /
• 제6권2호
• /
• pp.7-20
• /
• 1972

Experimental radiation nephritis was produced in 15 rabbits by X-irradiation. About $2,000{\gamma}$ (tissue doses) were given to both kidneys of a rabbit in 5 days. Other tissues and organs except both kidneys were protected with 2mm thickened lead plates. 5 weeks after the last irradiation, blood pictures, blood pressures, B.U.N., serum creatinine, Ca, Mg, Fe levels and serum erythropoietin activity of the irradiated rabbits were studied. After finishing above studies, rabbits were sacrificed and both kidneys were removed and examined histopathologically. Same laboratory and pathological studies were performed in 6 control rabbits. In this study, the author obtained following results. 1) Both kidneys of rabbitis with experimental raditation nephritis showed marked histopathological changes, i.e.: renal tubules showed diffuse cloudy swelling, impacted intraluminal hyaline casts and focal precipitations of lime salts on the tubular epithelium. Diffuse interstitial fatty necrosis and various degrees of fibrotic infiltrations on the interstitium were also seen in association with focal lymphocytic infiltrations. Hyaline degenerations were observed on the glomeruli and small vessels. 2) Experimental radiation nephritis rabbits showed marked lowering in R.B.C. counts, decreased hemoglobin levels, low hematocrit values and leucopenia in comparison with those of control rabbits. (P<0.01). (Table 1 & 2). 3) Mild proteinuria were observed in experimental radiation nephritis in rabbits. 4) The levels of B.U.N. and serum creatinine increased in experimental radiation nephritis. (P<0.01). (Table 1,3 & 4) 5) The levels of serum Ca and Mg Showed no statistical difference in comparison with those of control rabbits. (P>0.05) (Table 3 & 4). 6) No statistical correlations were observable between the levels of B.U.N. and Hb. values. (${\gamma}=-0.223$) No close correlations (${\gamma}=-0.328$) were noticed between the levels of B.U.N. and serum iron levels. 7) Erythropoietin activity (R.B.C. $^{59}Fe$ Incorporation) was measured by the modified Fried method. No change in its activity was noticed in radiation nephritis group comparing with that of the control group. (P>0.05). (Table 1,3 & 5). 8) Carotid artery blood pressures showed also no difference. (P>0.05). (Table 1 & 2).

• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.45-52
• /
• 2003

Red ginsengs are inspected manually by examining those in the dark room with back light illumination. Manual inspection is often influenced by physical condition of inspectors. Sometimes. the best grade, heaven. has some inner holes though it was inspected by a specialist. In order to resolve this problem, this study was performed to develop image processing algorithm to detect the inner holes in the x-ray image of ginseng. Because of little gray value difference between background and ginseng in the image. simple thresholding method was not appropriate. Modified watershed algorithm was used to differentiate the inner holes from background and normal ginseng body. Inner hole edge region detected by watershed algorithm consists of many number of blobs including normal portions. With line profile analysis with scanning one line at a time beginning the starting point. it shelved two peaks both ends representing extracting each blobs. in which setting threshold value as of lower peak value enabled us to obtain inner hole image. Once this procedure has to be done till the finishing point it is completing inner hole detection for one blob. Thus. conducting ail blobs by this procedure is completing inner detection of one whole ginseng. Detection results of the inner holes fer various size of red ginsengs were good even though there was small detection variation. 6.2%. according to position of x-rat tube.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.64-72
• /
• 1996

To develop a scouring method for the high-grade quality and the high value added of flax for spinning, it was measured and analyzed weight loss and degree of injury with change of scouring concentration, time, temperature and pH. We got the f ollowing results; Firstly, in case that flax was scoured at a fixed condition, the weight loss and degree of injury of scoured flax under the no-cutting condition were lower than that of scoured flax under the cutting condition. Secondly, when flax was scoured with $Na_{2}CO_{3}$, it was obtained that the higher weight loss and degree of injury and weight loss with the increase of scouring time and condition. The degree of injury was lower than any other under the treatment condition of 4% $Na_{2}CO_{3}$concentraion for 2 hours. Finally, when alkaline scoured flax was rescoured by pectinase, enzyme activation effect was the most active under the treatment condition of pH 4 for 2 hours. The scouring effect was better than that of alkaline scouring only.

• 한국염색가공학회지
• /
• 제26권2호
• /
• pp.88-98
• /
• 2014

This study is to assess the photocatalytic degradation of PET and Nylon 6 films containing nano-sized $TiO_2$ powders of anatase and rutile types. The PET and Nylon 6 films containing six kinds of the nanoparticles were prepared by melt casting method using a heating press machine. Reflectance in visible region and water contact angles of the irradiated PET and Nylon 6 composite films decreased with increasing UV/$O_3$ irradiation. Also the enhanced hydrophilicity has a close relationship with the increase in the Lewis base parameter, which indicates more oxidized polymer surfaces. The photocatalytic degradation of the nanocomposite films increased with increasing $TiO_2$ content and UV energy, which is more significant with the anatase types rather than the rutile types. The amide linkages in the Nylon 6 seemed to be more susceptible to the UV light compared to the ester groups in the PET, particularly in the presence of the $TiO_2$ photocatalysts. The photoscission and photodegradation of the polymers in the composites produced more degraded structure assisted by the photocatalytic activity of the $TiO_2$ nanoparticles. Also the composite films can bleach the methylene blue dyes more easily under the UV/$O_3$ irradiation, suggesting the photobleaching activity of the $TiO_2$ nanoparticles.

• 한국염색가공학회지
• /
• 제18권2호
• /
• pp.8-14
• /
• 2006

The pigment extraction of Opuntia ficus-indica has been conducted to develop useful natural dyes in place of synthetic dyes which are suspected to bring serious environmental pollutions. The dyeing ability on wool fabric by addition of ascorbic acid and several mordants were investigated by means of color measurement. In addition, the fastness of washing, perspiration, rubbing, light, dry cleaning, effect on bacterial reduction and UV-B protection were also investigated. From these investigation, it is suggested that the pigment extracted from Opuntia ficus-indica can be used as a source of natural dyes and the obtained result are as follows. 1. Maximum absorption band (${\lambda}max$) of Opuntia ficus-indica extract is 533nm. 2. The wool fabric dyed with Opuntia ficus-indica extract has stable color by the addition of ascorbic acid and is achieved with addition of 0.1% ascorbic acid, 0.5% several mordant, and three repeated dying at $50^{\circ}C$ for 1.5hr. 3. The wash fastness of the dyed wool fabric when it is washed with neutral detergent is more effective than alkaline detergent. The dry cleaning fastness of the dyed wool fabric is more excellent. In addition, the perspiration fastness of the dyed wool fabric is increased by mordanting method. And than the rubbing fastness of the dyed wool fabric is showed excellent under dryness and wetness. Light fastness of the dyed wool fabric, however is showed inferiority. 4. The wool fabric dyed with Opuntia ficus-indica extract is showed effective bacterial reduction and UV-B protection is increased remarkably.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.16-24
• /
• 2006

The purpose of this study is to improve the defects of chitosan crosslinked viscose rayon by ECH and to describe the change of hand of chitosan crosslinked viscose rayon fabrics. The chitosan crosslinked viscose rayon were manufactured by crosslinking process using ECH as crosslinking agent, 2 wt% aqueous acetic acid as a solvent of chitosan and ECH, and 20 wt% aqueous sodium hydroxide as crosslinking catalyst. Viscose rayon were first immersed in the pad bath of the mixed solution of chitosan and ECH, padded up to 100 wt% wet pick-up on weight of fiber(owf), precured on pin frames at $130^{\circ}C$ for 2 minutes, immersed in NaOH solution and finally wash and dry. Antimicrobial properties of the viscose rayon treated with chitosan were measured by the shake flask C.T.M. 0923 test method with staphylococcus aureus(ATCC 6538) as the microorganism. When the concentration of chitosan was increased chitosan crosslinked viscose rayon's LT, WT, B, 2HB and MIU were increased and G, 2HG, SMD, T and $T_m$ were decreased. On the other hand, WT, EM were decreased and RT was increased at $1{\times}10^{-2}M$ ECH. The optimum condition for crosslinking was that ECH concentration was between $1{\times}10^{-2}M\;and\;5{\times}10^{-2}M$. Antimicrobial effects of rayon fabric treated with chitosan was excellent.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.1-9
• /
• 2007

In recent years, the application of digital textile printing has increased. The benefits of using this method include the ease of sampling and the production of printed textiles. However, the production process of digital textile printing differs from that of conventional printing. For successful digital textile printing by ink-jet technology, the pretreatment of fabrics is very important in order to overcome the following problems. Low viscosity ink can spread easily on the textile surface leading to poor resolution. As a result, the combination of ink and pretreatment chemicals is still impractical and consequently most fabrics used in digital textile printing will require a pre treated coating in order to prevent the ink colours from bleeding on the fabric. Research presented in this paper shows some preliminary attempts to establish the relationship between the pre treatment and the digital textile printing quality. Various cotton fabrics were treated with pre treatment agents including ingredients like thickener, alkali and humectant, and then ink spread effect and colour yield of printed fabrics by reactive ink were analysed by using an optical microscope and K/S value. The results show that digital textile printing quality on cotton fabrics can be optimized with appropriate pre treatments.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.23-32
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional indigo dyeing. Leaf powder colorants were prepared by hot air($50^{\circ}C$) and room temperanrre($25^{\circ}C$) drying methods from fresh leaves. The presence of indigo in the leaf powder colorants was confirmed by UV/Visible absorption spectra. All the powder colorants showed broad absorption at 602 nm as same as synthetic indigo. Dyeing was done by reduction method with sodium hydrosulfite and sodium hydroxide. Leaf powder colorants produced blue color on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants prepared at room temperature drying were more stable for long term storage than that prepared by hot air drying. Thus, the powder colorants prepared by room temperature drying was reduced and dyed in one-step process without sodium hydroxide in the dyebath for further investigate dyeing properties. K/S value of the fabric dyed without sodium hydroxide was much higher than one dyed with sodium hydroxide. Regardless of the addition of sodium hydroxide, rubbing fastness was fairly good showing above 4 rating. Fastness to dry cleaning and light of the fabrics dyed without sodium hydroxide were mote higher than that dyed in alkaline condition.