• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.353-358
• /
• 2003

Regarding the fattening of younger cattle that the Ministry of Agriculture Forestry and Fisheries (MAFF) recommends in Japan, this study looked at vitamin A control in feed and blood and its effect on performance of production and carcass composition of Wagyu steers. Five sets from 10 Wagyu artificial identical twins were divided to into 2 groups, a restricted group (Test) and a supplied group (Control). The body weight at the finishing time of the Test was significantly lower than that of the Control (p<0.05). The daily gain from 13 to 21 months old, as the animals in the Test were fed the concentrated feed without Vitamin A, was significantly different (p<0.05) between the Test and the Control. The total daily gains for the Test and the Control for the fattening period were 0.82 kg/day and 0.93 kg/day, respectively, which showed a significant difference (p<0.01). Regarding the rib thickness, the Test was thinner than the Control. The Beef Marbling Scores of the Test and Control were 3.60 and 2.80, respectively. The muscle weight of the Test was significantly smaller than that of the Control (p<0.01). However, regarding the ratio to the carcass, the Test was significantly higher than the Control (p<0.05). For the fat weight, the Test was smaller by about 15 kg than the Control (p<0.01). Furthermore, for the fat ratio to the carcass, the Test was significantly lower than the Control (p<0.05). The bone weights of the two groups were approximately the same. Regarding the ratio of bone to carcass, the Test was higher than the Control (p<0.01). For the younger fattening method, the low level vitamin A in the serum had the effect that the muscle ratio to the carcass weight was greater and the fat was less, but the carcass and muscle weight were less.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.129-140
• /
• 2012

Smoke toxicity is the test for the toxicity evaluation of smoke and hazardous gas, caused by combustion of building materials and finishing materials. Smoke toxicity can be evaluated by the mean incapacitation time of mice. This test result can be influenced by the health status of mice and test condition. In acute inhalation toxicity test of hazardous gas, no typical clinical findings and histopathologic abnormalities were observed. Tracheitis and bronchitis as well as acute lung inflammation around terminal bronchiole in some mouse of the highest dose group. Through this study, we established the method for inhalation toxicity test of hazardous gas as well as the SOP of inhalation toxicity test. However, in the future studies, the concentration control methods for inhalation technologies on hazardous gas will be needed to improve continuously and also further studies on other gas inhalation toxicity will be needed to conduct.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.807-823
• /
• 1995

The purpose of this study was to analyze the stress distribution and the displacement happened to the abutment, the prosthesis, and the surrounding structure according to the location of the nonrigid connector, that is, the keyway in the distal of canine and the mesial of the implant in the three unit fixed partial denture. Two-dimensional finite element model ws constructed and analyzed for the stress distribution and the displacement using software ABAQUS(Ver 5.2 Hibbitt, Karisson & Sorenson, Inc., 1992). After finishing the finite element model, the distribution load of 15kg was applied simultaneously to the all cusp tips of the prosthesis and the concentration load of 10㎏ was applied respectively at the each cusp tip of the prosthesis. The following results were obtained : 1. The amount of displacement of the implant was greater in case of the non-rigid connection than the rigid connection, and the more favorable displacement was shown in case of the IKb than the IKa. 2. Without regard to the connection method, the stress represented at the surrounding bone was similar, and the more favorabel stress distribution was shown in case of IKb. 3. The maximum stress was concentrated at the fastening screw and the neck of implant in all experimental groups, and their stress magnitudes were in the order of IKb, IR, and IKa.

• Land and Housing Review
• /
• v.5 no.3
• /
• pp.179-191
• /
• 2014

The purpose of this study is to employ a method called 'conflict impact assessment' to analyze the progress, background, cause and relevant issues of conflicts related with affordable housing for youth (Happiness Housing Project), a project that has been implemented since last May 2013, thereby identifying the relevant problems and draw out objectives for improvement. The researchers expect that this study will contribute to solving the current issues regarding Happiness Housing, and contribute to improving the quality of the government's policies. For the above purpose, literatures on Happiness Housing produced from August to November 2013 were reviewed, in-depth telephone or face-to-face interviews were conducted with personnel associated with project implementation in the Ministry of Land, Infrastructure and Transportation and LH, etc., and major interested parties including Yangcheon-gu residents. Key issues identified regarding Happiness Housing construction include: the way that the project was implemented, living quality of residents, impact on educational environment, inconsistence with existing plans, relatively high construction cost, insolvency of public corporations, land use fee issue with Korail, need of preliminary feasibility survey, securing sufficient amount for supply and issue of additional designation, likelihood of finishing construction in time and issues related with actual source of demand, etc. Through analysis of conflict development and positions of interested parties, the main causes of the conflicts were identified as follows: lack of deliberation on pledges during election, lack of viability review on pledges, lack of conflict management plans, one-way implementation without consent of interested parties, project plans established with no regard to local circumstances, frequent project revision, underwehlming level of conflict management. In order to address issues above, the following measures need to be taken: selecting election pledges based on actual effectiveness, thorough assessment on pledges by relevant departments, gradual implementation based on consideration of the actual circumstances, participation of key interested parties, consistent policy and adopting conflict management techniques that reflect the reality.

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.175-183
• /
• 2015

Weight loss treatment of a fiber leads an improvement of its handle and drape properties. Hydrolysis of a fiber is commonly known as a method to reduce its weight of 5-40%. Most of the studies on the weight loss treatment are mainly based on polyester fibers and there has been almost no study on the weight reduction of nylon fibers. In this study, however, in order to develop a use of nylon 6 fiber for the industrial applications such as toothbrush, underwear, carpet and more, weight loss treatment of a nylon 6 fiber was carried out. Under various treatment conditions, morphological analysis were done to observe the change in the structure of the surface and analysis. From the observation of formic acid treated nylon 6 fiber, there were many etched and deformed morphologies. Thermal and crystalline properties were analyzed to find the changes in the crystal structure caused by the weight loss treatment. There were little differences in the crystalline properties of nylon 6 fiber by formic acid treatment. Tensile strength of nylon 6 fiber decreases with acid concentration. The FITR peak intensity of the amide bond decreases with formic acid concentration.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.29-45
• /
• 2012

The purpose of this study is for providing not only the latest design technique trend for zero waste fashion, but information about creative fashion design education through eco-fashion industry trend in globally and domestic which is focusing on eco-fashion labelling. The research were processed with literature related eco, sustainable, green fashion books, former articles, newspapers, and web sites. The results as follows; The certification about eco-fashion product is moving to 'Life Cycle Assessment' from focused on primary process like material, finishing, dyeing. Especially simplicity of process means reducing the wastes. And fabric wastage for adult outwear was estimated 15% percent of total fabric used in general design studios. Three cases for Zero waste fashion were as follows; First, Jigsaw puzzle by Timo Rissane and Mark Liu were different zero waste methods, but the result was same. Rissene's method was based on traditional cutting like 'cut and sew' but traditional cutting can lead to design that have an abundance of fabric and drape. Jigsaw of Rissene was approached with description a pattern-cutting technique in which all piece interlock with each other generating no waste from design production. Another Jigsaw by Liu was related with innovative textile design. DTP makes the possibilities for zero waste garment production almost endless. The dress intricately cut from 10 pieces, wastes none of the fabric required to make it. Second, Subtraction Cutting by Julian Roberts provides unexpected fluid, organic forms and zero waste fabric. Utilizing Roberts plug(tunnel) technique enables any part of the garment that is removed for fit or aesthetics to be reincorporated into the design of garment. Third was 'Bio Couture' by Suzanne Lee. She has created garments from cellulose bacteria which grow in a bathtub using only green methods addressing in such as way ecological issues and exploring the future of fashion design in conjunction with technology.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.8-12
• /
• 2014

Interior finishing materials using noncombustible were regulated by the building codes to prevent the spread of fire and protect occupants. The average deed of stopping time of experimental mouse exposing combustion gas were measured by KS F 2271 gas toxicity test. At that time, The average deed of stopping time under 9 minutes were judged a inconsistence. This experiment method has limit to find out a cause of toxicity effect factor. In this study, particle size analysis were performed for investigate a major factor.

• The Korean Journal of Nuclear Medicine
• /
• v.6 no.2
• /
• pp.7-20
• /
• 1972

Experimental radiation nephritis was produced in 15 rabbits by X-irradiation. About $2,000{\gamma}$ (tissue doses) were given to both kidneys of a rabbit in 5 days. Other tissues and organs except both kidneys were protected with 2mm thickened lead plates. 5 weeks after the last irradiation, blood pictures, blood pressures, B.U.N., serum creatinine, Ca, Mg, Fe levels and serum erythropoietin activity of the irradiated rabbits were studied. After finishing above studies, rabbits were sacrificed and both kidneys were removed and examined histopathologically. Same laboratory and pathological studies were performed in 6 control rabbits. In this study, the author obtained following results. 1) Both kidneys of rabbitis with experimental raditation nephritis showed marked histopathological changes, i.e.: renal tubules showed diffuse cloudy swelling, impacted intraluminal hyaline casts and focal precipitations of lime salts on the tubular epithelium. Diffuse interstitial fatty necrosis and various degrees of fibrotic infiltrations on the interstitium were also seen in association with focal lymphocytic infiltrations. Hyaline degenerations were observed on the glomeruli and small vessels. 2) Experimental radiation nephritis rabbits showed marked lowering in R.B.C. counts, decreased hemoglobin levels, low hematocrit values and leucopenia in comparison with those of control rabbits. (P<0.01). (Table 1 & 2). 3) Mild proteinuria were observed in experimental radiation nephritis in rabbits. 4) The levels of B.U.N. and serum creatinine increased in experimental radiation nephritis. (P<0.01). (Table 1,3 & 4) 5) The levels of serum Ca and Mg Showed no statistical difference in comparison with those of control rabbits. (P>0.05) (Table 3 & 4). 6) No statistical correlations were observable between the levels of B.U.N. and Hb. values. (${\gamma}=-0.223$) No close correlations (${\gamma}=-0.328$) were noticed between the levels of B.U.N. and serum iron levels. 7) Erythropoietin activity (R.B.C. $^{59}Fe$ Incorporation) was measured by the modified Fried method. No change in its activity was noticed in radiation nephritis group comparing with that of the control group. (P>0.05). (Table 1,3 & 5). 8) Carotid artery blood pressures showed also no difference. (P>0.05). (Table 1 & 2).

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.45-52
• /
• 2003

Red ginsengs are inspected manually by examining those in the dark room with back light illumination. Manual inspection is often influenced by physical condition of inspectors. Sometimes. the best grade, heaven. has some inner holes though it was inspected by a specialist. In order to resolve this problem, this study was performed to develop image processing algorithm to detect the inner holes in the x-ray image of ginseng. Because of little gray value difference between background and ginseng in the image. simple thresholding method was not appropriate. Modified watershed algorithm was used to differentiate the inner holes from background and normal ginseng body. Inner hole edge region detected by watershed algorithm consists of many number of blobs including normal portions. With line profile analysis with scanning one line at a time beginning the starting point. it shelved two peaks both ends representing extracting each blobs. in which setting threshold value as of lower peak value enabled us to obtain inner hole image. Once this procedure has to be done till the finishing point it is completing inner hole detection for one blob. Thus. conducting ail blobs by this procedure is completing inner detection of one whole ginseng. Detection results of the inner holes fer various size of red ginsengs were good even though there was small detection variation. 6.2%. according to position of x-rat tube.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.