• 제목/요약/키워드: finishing method

검색결과 832건 처리시간 0.029초

보다 정확한 동적 상황인식 추천을 위해 정확 및 오류 패턴을 활용하여 순차적 매칭 성능이 개선된 상황 예측 방법 (Context Prediction Using Right and Wrong Patterns to Improve Sequential Matching Performance for More Accurate Dynamic Context-Aware Recommendation)

  • 권오병
    • Asia pacific journal of information systems
    • /
    • 제19권3호
    • /
    • pp.51-67
    • /
    • 2009
  • Developing an agile recommender system for nomadic users has been regarded as a promising application in mobile and ubiquitous settings. To increase the quality of personalized recommendation in terms of accuracy and elapsed time, estimating future context of the user in a correct way is highly crucial. Traditionally, time series analysis and Makovian process have been adopted for such forecasting. However, these methods are not adequate in predicting context data, only because most of context data are represented as nominal scale. To resolve these limitations, the alignment-prediction algorithm has been suggested for context prediction, especially for future context from the low-level context. Recently, an ontological approach has been proposed for guided context prediction without context history. However, due to variety of context information, acquiring sufficient context prediction knowledge a priori is not easy in most of service domains. Hence, the purpose of this paper is to propose a novel context prediction methodology, which does not require a priori knowledge, and to increase accuracy and decrease elapsed time for service response. To do so, we have newly developed pattern-based context prediction approach. First of ail, a set of individual rules is derived from each context attribute using context history. Then a pattern consisted of results from reasoning individual rules, is developed for pattern learning. If at least one context property matches, say R, then regard the pattern as right. If the pattern is new, add right pattern, set the value of mismatched properties = 0, freq = 1 and w(R, 1). Otherwise, increase the frequency of the matched right pattern by 1 and then set w(R,freq). After finishing training, if the frequency is greater than a threshold value, then save the right pattern in knowledge base. On the other hand, if at least one context property matches, say W, then regard the pattern as wrong. If the pattern is new, modify the result into wrong answer, add right pattern, and set frequency to 1 and w(W, 1). Or, increase the matched wrong pattern's frequency by 1 and then set w(W, freq). After finishing training, if the frequency value is greater than a threshold level, then save the wrong pattern on the knowledge basis. Then, context prediction is performed with combinatorial rules as follows: first, identify current context. Second, find matched patterns from right patterns. If there is no pattern matched, then find a matching pattern from wrong patterns. If a matching pattern is not found, then choose one context property whose predictability is higher than that of any other properties. To show the feasibility of the methodology proposed in this paper, we collected actual context history from the travelers who had visited the largest amusement park in Korea. As a result, 400 context records were collected in 2009. Then we randomly selected 70% of the records as training data. The rest were selected as testing data. To examine the performance of the methodology, prediction accuracy and elapsed time were chosen as measures. We compared the performance with case-based reasoning and voting methods. Through a simulation test, we conclude that our methodology is clearly better than CBR and voting methods in terms of accuracy and elapsed time. This shows that the methodology is relatively valid and scalable. As a second round of the experiment, we compared a full model to a partial model. A full model indicates that right and wrong patterns are used for reasoning the future context. On the other hand, a partial model means that the reasoning is performed only with right patterns, which is generally adopted in the legacy alignment-prediction method. It turned out that a full model is better than a partial model in terms of the accuracy while partial model is better when considering elapsed time. As a last experiment, we took into our consideration potential privacy problems that might arise among the users. To mediate such concern, we excluded such context properties as date of tour and user profiles such as gender and age. The outcome shows that preserving privacy is endurable. Contributions of this paper are as follows: First, academically, we have improved sequential matching methods to predict accuracy and service time by considering individual rules of each context property and learning from wrong patterns. Second, the proposed method is found to be quite effective for privacy preserving applications, which are frequently required by B2C context-aware services; the privacy preserving system applying the proposed method successfully can also decrease elapsed time. Hence, the method is very practical in establishing privacy preserving context-aware services. Our future research issues taking into account some limitations in this paper can be summarized as follows. First, user acceptance or usability will be tested with actual users in order to prove the value of the prototype system. Second, we will apply the proposed method to more general application domains as this paper focused on tourism in amusement park.

SPSFC법을 이용한 단계성토 시 침하량 예측 (Settlement Prediction for Staged Filling Construction Using SPSFC Method)

  • 강성현;김태형
    • 한국지반환경공학회 논문집
    • /
    • 제15권12호
    • /
    • pp.97-107
    • /
    • 2014
  • 현장에서 널리 활용하고 있는 침하예측기법으로는 Hyperbolic법, Hoshino법, Monden법 등이 있다. 이들 기존 침하예측법은 최종침하량 예측이 최종 성토단계가 완료된 이후 가능하다는 단점을 가지고 있다. 본 연구에서는 이와 같은 기존 예측법의 단점을 보완할 수 있는 새로운 침하량 예측법(SPSFC: Settlement Prediction for Staged Filling Construction)을 제안하였다. 이 방법은 연약지반에서 성토 완료 후뿐만 아니라, 초기 성토단계에서 단계성토별 시간-침하곡선을 예측할 수 있다. SPSFC법을 검증하기 위해 연약지반 개량을 위한 배수공법이 적용된 낙동강 하구 지역 두 개 현장에서 계측된 자료를 이용하여 기존 예측기법과 함께 SPSFC법으로 장래침하량을 예측하였다. 비교 결과, SPSFC법으로 예측된 침하량이 기존 예측법과 비교해서 신뢰성이 있음을 확인하였다. 또한 SPSFC법으로 초기 성토 단계에서 침하계측자료를 분석하여 예측에 필요한 지반상수를 구하고 이것을 이용하여 나머지 단계 성토 시 발생할 시간-침하량 곡선을 도시하였다. SPSFC법으로 예측된 침하량이 계측치와 잘 일치하는 것으로 나타나 SPSFC법으로 초기 성토단계의 침하계측 값만을 가지고 장래 침하량 예측이 가능함을 확인하였다.

Anthraquinone을 포함하는 신규 Phthaloperinone 색소의 합성과 특성에 대한 연구 (Synthesis and Properties of New Phthaloperinone Dyes containing Anthraquinone Moiety)

  • 전근;권선영;김유진;김성훈
    • 한국염색가공학회지
    • /
    • 제28권2호
    • /
    • pp.57-62
    • /
    • 2016
  • We have synthesized five novel phthaloperinone dyes via a condensation reaction to be applied as yellow colorants for liquid crystal display(LCD) color filters. The reaction between 1,8-naphthalic anhydride(1a), 4-chloro-1,8-naphthalic anhydride(1b), 4-bromo-1,8-naphthalic anhydride(1c), 3-nitro-1,8-naphthalic anhydride(1d), 4-nitro-1,8-naphthalic anhydride(1e) and 1,2-diaminoanthraquinone(2) proceeded readily giving a product in 72-88% yields. The synthesized dyes were characterized by UV-Vis, mass spectrometry and elemental analysis. The spectral properties and thermal stability of the dyes were examined. The dyes absorb at around 400-450nm. All five dyes showed satisfactory thermal stability: the dyes retain 99-100% of its original weight at $300^{\circ}C$, 98-100% at $350^{\circ}C$, 92-98% at $400^{\circ}C$, and 84-92% at $450^{\circ}C$. We have quantitatively evaluated the reaction mechanism and reactivity of dye molecules by means of Pariser-Parr-Pople Molecular Orbital Method(PPP-MO).

퇴원환자 진료정보 DB의 데이터 수집 과정 재설계 (Reengineering of the Data Collection Process for Discharge Abstract Database)

  • 홍준현;최귀숙;이은미
    • 한국의료질향상학회지
    • /
    • 제7권1호
    • /
    • pp.106-116
    • /
    • 2000
  • Background : Severance Hospital is an university hospital which has 1,580 beds. A LAN system was installed in the Medical Record Department in 1992 and discharge abstract data have been added to the discharge abstract database(DB) The previous work flow in the Medical Record Department had 5 levels: 1) chart collection from wards, 2) assembling, 3) abstracting data from medical record on worksheet by 2 RRAs, 4) checking deficiencies and coding diagnosis and procedures by 4 RRAs, 5) inputting the data into the discharge abstract data base by 1 RRA. The average processing time took 19.3 days from the patient discharge date. It had the production of monthly statistical report delayed. Besides, it caused the users in the hospital to complain. Methods : A CQI team was organized to find a way to shorten the processing time less than 10 days. The team identified the factors making the processing time long and integrated three levels from the 3rd level into one. Each of 7 RRAs performed the integrated level on her workstation instead of taking one of three separate levels. The comparison of processing time before and after the changes was made with 3'846 discharges of April, 1999 and 4,189 discharges of August, 1999. Results : The average processing time was shortened from 19.3 days to 8.7 days. Especially the integrated level took only 3.6 days, compared with 12.3 days before the change. The percentage of finishing up the whole processing within 10 days from discharge was increased up to 77.6%, which was 2.4% before the integration. The prevalence of error in data input was not increased in the new method. Conclusions : The integrated processing method has the following advantages: 1) the expedition of production of monthly statistical report, 2) the increase of utilizing rate of dischare abstract data by Billing Dept, Emergency Room, QI Dept., etc., 3) the improvement of intradepartmental work follow, 4) the enhancement of medical record quality by checking the deficiencies earlier than before.

  • PDF

리파제에 의한 양모/폴리에스터 혼방직물의 동시 개질 (Enzymatic Modification of Wool/Polyester Blend Fabrics Using Lipase from Aspergillus Oryzae)

  • 송현주;김혜림;송화순
    • 한국의류학회지
    • /
    • 제33권7호
    • /
    • pp.1121-1127
    • /
    • 2009
  • This study presents an eco-friendly and one-step finishing method for modifying fiber property that reduces fiber damage in wool/polyester blend fabrics. Lipase from aspergillus oryzae is used in this experiment. The enzymatic treatment condition is optimized by measuring the relative activity of lipase depending on pH level, temperature, concentration of lipase, and treatment time. The concentration of $CaCl_2$as an activator is determined by the characteristics including whiteness, water contact angle (WCA), and dyeing property. The modified properties of lipase treated fabrics are tested for pill resistance and surface morphology. The results are described as follows: the optimum condions for lipase treatment constitute a pH level of 8.0, treatment temperature of 40$^{\circ}$$_C$, concentration of lipase at 100% (o.w.f), and a treatment time of 90 minutes. $CaCl_2$helps in raising lipase activation, and the optimum concentration is 50mM. The whiteness, wet ability, and pill resistance of lipase treated fabrics improves as compared to the control. The dyeing property of lipase treated fabrics improved by 53.5% after using the one-bath dyeing method. This means that lipase treatment can save time and cost during the dyeing process since lipase treatment modifies wool and polyester fibers. The surface of lipase treated wool fibers do not exhibit any change, however voids and cracks manifest on the surface of lipase treated polyester fibers.

실크 정련 세리신 단백질의 분리특성과 응용(2) (Separation Performance and Application of Sericin Protein in Silk Degumming Solution(2))

  • 차진우;박인우;배기서;홍영기;이서희;김용덕
    • 한국염색가공학회지
    • /
    • 제22권2호
    • /
    • pp.132-139
    • /
    • 2010
  • Sericin pulverization process was applied by freezing-thawing of sericin protein concentration solution and physicochemical properties of sericin/chitosan blended films were investigated. In sericin pulverization process by freezing-thawing method, the refrigeration storage at $4^{\circ}C$ maximized gelling between sericin molecules, which increased 10% of recovery ratio from sericin concentration solution that using ultrafiltration procedure. In physicochemical properties of sericin/chitosan blended films, the maximum load of chitosan (6.7kgf) had higher than that of sericin (1.2kgf), and the elongation of sericin and chitosan had 96% and 34%, respectively. Also FT-IR analysis of sericin/chitosan blended films showed that both sericin and chitosan films had amide I peak (N-H bond) in $1,521cm^{-1}$ and amide II peak (C=O bond) in $1,630cm^{-1}$. In addition, it could confirm compatibility between both materials as indicated by the decrease in the amide I peak's absorption value as chitosan content increases.

면직물에의 천연 인디고 염색 - 일단계 환원/염색 공정 - (Natural Indigo Dyeing of Cotton Fabric - One-step reduction/dyeing process -)

  • 신윤숙;조아랑;류동일
    • 한국염색가공학회지
    • /
    • 제22권2호
    • /
    • pp.101-109
    • /
    • 2010
  • The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.

비접촉식 열공구를 이용한 VLM-ST 제품의 미세 형상 가공 공정 개발에 관한 연구 (Development of Shape refining process of VLM-ST Parts Using Noncontacting Hot Tool)

  • 김효찬;이상호;안동규;양동열
    • 한국정밀공학회지
    • /
    • 제21권1호
    • /
    • pp.149-158
    • /
    • 2004
  • In most RP processes, the inherent stair-stepped surfaces and shrinkage-induced warping of the parts require post processing such as surface finishing. To minimize such defects, VLH-ST, a newly developed RP process, employs a 3.9-mm thick expandable polystyrene (EPS) foam sheet and a hot wire to contour it to have slant linear-interpolated sides. The use of relatively thick sheets for layers, however, limits the process capability of constructing fine details, especially smaller than the layer thickness. This study is focused on the development of a post processing method fo fine details of VLM-ST parts. The post-processing tool was designed to meet all the requirements for the desirable post processing. It adopted a hot wire as a means of melting the EPS foam sheet. Various basic experiments on the post processing were carried out to obtain the optimal process conditions. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the experiments. The effectiveness of the developed post-processing method fo forming or engraving fine details on the VLM-ST parts has been thus demonstrated. The experiments on engraving several sets of letters, such as CANESM, 인간, and 한국과학기술원, on the EPS foam sheet were carried out. In addition, a flowery shape was engraved on a three-dimensionally curved surface of a pottery-shape VLM-ST part.

공동주택 하자분류체계 기반 하자위험 평가 (Assessment of Defect Risks in Apartment Projects based on the Defect Classification Framework)

  • 장호면
    • 한국산학기술학회논문지
    • /
    • 제19권3호
    • /
    • pp.61-68
    • /
    • 2018
  • 공동주택 하자는 유지보수에 막대한 비용이 들어가게 되며, 발주자, 시공자 그리고 입주자 등에게 심각한 피해를 입힌다. 이에 따라 하자분쟁을 최소화하고 철저한 품질관리를 통한 체계적이고 효율적인 하자관리를 위한 토대를 마련할 필요가 있다. 본 연구에서는 하자분쟁사례를 활용하여 공동주택의 공종/부위/현상에 따른 하자분류체계를 도출하고, 이를 기반으로 하자유형별 하자위험을 평가할 수 있는 방안을 제시하였다. 이를 위하여 본 논문에서는 경과년수 10년 이상 공동주택 하자분쟁사례 34건, 약 6000여개의 하자항목 자료를 토대로 분석을 실시하였다. 분석 결과를 정리하면, 하자분류체계는 하자 공종, 하자부위 및 하자현상으로 크게 분류한 후 세부적으로 총 157개 항목으로 세분화하였다. 하자분류체계를 토대로 하자 빈도, 하자비용 및 하자위험을 분석한 결과, RC공사 및 마감공사에 하자위험이 상당히 집중되어 있는 것으로 확인되었다. 이에 따라 이러한 하자위험에 대한 하자예방 활동이 우선적으로 고려되어야 할 것으로 판단된다. 본 연구를 토대로 하자위험을 관리할 수 있는 방안에 대한 추가적인 연구가 필요할 것으로 판단된다.

Radon Exhalation from Five Wood Species

  • Lee, Ju Yong;Choi, Gyu Woong;Kang, Seog Goo
    • Journal of the Korean Wood Science and Technology
    • /
    • 제46권6호
    • /
    • pp.735-747
    • /
    • 2018
  • Radon radiation exposures in home have been posed as a potential cancer hazard. This research aims to present the basic data of the indoor radon concentration level by examining the radon exhalation rates of wood species. Radon exhalation rates from five commonly used wood species in Korean wood building construction were measured with Continuous Radon Monitor (CRM), Model 1028 (Sun Nuclear Co., USA) using the Closed Chamber Method (CCM). The mass exhalation rate was observed to vary from $0.00089Bq{\cdot}kg^{-1}{\cdot}h^{-1}$ to $0.00181Bq{\cdot}kg^{-1}{\cdot}h^{-1}$, whereas the surface exhalation rate was observed to be $0.00677-0.01517Bq{\cdot}m^{-2}{\cdot}h^{-1}$. The radon exhalation rate of Quercus accutissima Carruth (white oak) which has the highest density showed the highest figure among the five wood species, on the other hand, the rest of four species showed similar results which were similar to the radon exhalation rates of wood in the U.S.A. and Canada. The average of the concentration measured by the CCM represented well up to the second half-life period (7.7 days). Because result of these small quantities seems to indicate that radon exhalation from the tested wood species has almost negligible impact, the main culprit of the high indoor radon concentration is clearly derived from the background of surrounding wood house. Therefore, as a safety precaution, infrastructures made of wood materials should be designed with the consideration of influx of radon and built accordingly. Furthermore, it is highly desirable that wood will be needed to use for furniture and interior finishing material in indoor environment.