• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.231-238
• /
• 2017

There are many kinds of elements and processes for the development of high quality bedding products like fiber, high-temperature heat treatment, dyeing process, tenter drying with softening agent and multiple final finishing. Especially we examined the mechanical characteristic properties of fabrics according to different yarn types. The critical physical properties of the yarn consisting the pile knitted fabrics were obtained for the development of the hi-grade bedding items. The material property and the exhaustion behaviour of the developed pile knitted fabrics composing of different yarns were measured and observed. The physical properties of the developed fabric were evaluated through the material property analysis of the yarn, the physical nature of the pile knitted fabrics and the data of the exhaustion performance; tensile strength, tensile elongation, tearing strength, cross section of yarn types, dyeing properties etc. And then high-class of bedding items were knitted using the double raschel machine to make the pile knitted fabrics.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권4호
• /
• pp.540-547
• /
• 2001

An experiment was conducted to investigate the effects of environmentally friendly agents (yucca extract, mineral feed additive, acidifier, nonspecific immunostimulating anionic alkali solution) on the growth performance, nutrient digestibility, nutrient excretion and carcass characteristics in growing-finishing pigs. A total of 125 pigs were allotted into 5 treatments with 5 replications, 5 pigs per pen in a completely randomized block design. Dietary treatments consisted of 1) control: basal diet, 2) YE: basal diet+120 mg/kg of yucca extract, 3) MFA: basal diet+50 mg/kg of mineral feed additive, 4) NIS: basal diet+3% of NIS (nonspecific immunostimulating anionic alkali solution), and 5) Acidifier: basal diet+0.5% of acidifier (organic acid complex). During the growing phase of the feeding trial, There were no significant differences in average daily feed intake (ADFI) and feed conversion ratio (F/G) among treatments, but the Acidifier group showed higher average daily gain (ADG) than the MFA group (p<0.05). During the finishing phase, there were no significant differences in growth performance among treatments, however YE supplementation increased ADG and F/G by 3.1 and 6.15%, respectively, when compared to control group. Proximate nutrients (dry matter, DM; crude protein, CP; crude ash, CA; crude fat, CF; gross energy, GE; calcium, Ca and phosphorus, P) digestibility did not show any significant differences among the treatments. And there were no significant differences in DM, N and P excretion as well. The supplementation of environmentally friendly agents tended to increase carcass weight compared to control group. Pigs fed MFA showed significantly heavier (p<0.05) carcass weight than those fed control or Acidifier diets. Addition of these agents except for NIS to diet for growing-finishing pigs caused a similar feed cost/kg weight gain than control group. Therefore, present study suggested that the optimum environmentally friendly agent would be yucca extracts, considering the effects on growth performance, nutrient digestibility, nutrient excretion, carcass characteristics and feed cost in growing-finishing pigs.

• 콘크리트학회논문집
• /
• 제18권1호
• /
• pp.125-132
• /
• 2006

최근 들어 툭별한 물리적 방법을 사용하지 않고 내구성능이 저하된 콘크리트의 성능을 회복시키는 방법의 일환으로서 콘크리트 표면보호재에 대한 관심이 높아지고 있다. 표면보호는 직접적인 의미로서는 콘크리트 구조물의 표면을 보호하는 것뿐만아니라 다양한 열화요인의 침투를 억제함으로서 내부의 콘크리트 및 철근의 열화를 억제하여 콘크리트 구조물을 보호하게 된다. 이와 같은 표면보호재 중 함침계 표면보호재는 콘크리트 표면층의 공극에 충전 혹은 생성물을 석출시켜 치밀한 층으로 하느 충전계와 콘크리트 표면층의 외부 및 내부표면의 성질을 개선하는 표면계로 분류하는 것이 가능하다. 따라서 본 연구는 규플르오르화염을 주성분으로 하는 표면형 함침계 표면보호제 도포에 의한 콘크리트 표면의 세공구조의 변화 및 중성화, 염해, 화학적 침식 등의 내구성 향상을 실험실증적으로 검토함으로서 콘크리트 구조물의 내구성향상 방안을 제시하고자 한다. 그 결과, 표면보호제를 도포함으로서 모든 물시멘트비에서 도포전과 비교하여 전세공용적이 감소하고 있으며, 특히 50nm이상의 비교적 큰 세공경인 모세관공극의 용적이 감소함으로서 물흡수성, 중성화 저항성, 내황산성, 염소이온침투 저항성 등의 내구성 향상에 기여하는 것으로 나타났으며, 그 효과는 물시멘트비가 클수록 높게 나타났다.

• 콘크리트학회논문집
• /
• 제13권1호
• /
• pp.9-15
• /
• 2001

콘크리트 구조물의 성능저하는 여러 성능저하 요인들의 상호작용에 의해 발생한다. 특히 중성화는 시간의 경과에 따라 증가하는 대표적인 성능저하기구로 알려져 있다. 최근 들어 중성화 메카니즘에 관한 기초적인 연구와 더불어 중성화로 성능저하된 구조물의 내구성 증진을 위한 공법 및 기술개발이 활발히 진행중이다. 이에 본 논문에서는 기존에 제안되고 있는 중성화 단계에 따른 보수공법을 바탕으로 중성화된 콘크리트에 침투성 알칼리성부여제를 도포함에 따른 알칼리성 회복성상과 표면피복재의 종류에 따른 알칼리성 유지성능을 정량적으로 비교.분석하였다. 본 실험결과 알칼리성부여제를 토포함에 의해 촉진중성화에 의해 pH가 저하된 콘크리트의 알칼리성 회복성능을 확인 할 수 있었으며, 알칼리성부여제 도포후 표면피복재에 따라 콘크리트의 알칼리성 유지성능은 큰 차이를 나타내는 것으로 나타났다.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.8-17
• /
• 2008

Poly (vinyl acetate) (PVAc) was used as a precursor of PVA/PVAc (skin/core) bicomponent. In order to investigate the possibility of PVA particles for electrical applications, PVA/PVAc particles were produced with an emulsifier, SDS (Sodium Dodecyl Sulfate) and an initiator, V-50 (2,2'-azobis(2-amidinopropane)digydrochloride). In this study, we investigated the electrical property of PVA/PVAc (skin/core) particles. The hydroxyl group of the PVA/PVAc (skin./core) was confirmed by the analysis of PVAc and PVA/PVAc (skin/core) using Fourier Transform Infrared Spectroscopy (FT-IR). The zeta-potential of the PVA/PVAc (skin/core) and PVAc has similarity; however, charge control agent (CCA) treated PVA/PVAc (skin/core) particles has lower zeta-potential than untreated PVA/PVAc particles. The zeta-potential (negative values) of the PVA/PVAc (skin/core) were enhanced in proportion to the increased concentration of CCA.

• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.96-102
• /
• 2020

Recently, it was reported that chitosan or APTMS(3-aminopropyltrimethoxysila ne) treatment to cotton using the simple pad-dry-cure method has potential to prepare textile materials for military chemical warfare protective clothing. However, it is not confirmed which method is more efficient. Therefore, this study aims to quantitatively compare detoxification properties of chitosan treated cotton fabric with those of APTMS treated cotton fabric. Detoxification properties were evaluated using the well-known organic phosphorous nerve agent stimulant, diisopropylfluorophosphate(DF P). With the same amount of chitosan and APTMS on the surface of the cotton fabrics, APTMS treated cotton fabric exhibited 10% higher detoxification properties than chitosan treated cotton fabric based on the rate of DFP hydrolysis and half-live of DFP calculated from the DFP decontamination ratios of the treated cotton fabrics through time. Therefore, APTMS treatment can be more efficient method to prepare the textile materials for military protective clothing than chitosan treatment.

• 한국염색가공학회지
• /
• 제20권3호
• /
• pp.18-24
• /
• 2008

The purpose of this study is to develop the dyeing method with dry leaves of indigo plant. Coloring matter was extracted from dry leaves of indigo plant with hot sodium hydroxide solution. The extract was reduced with sodium dithionite, and it was used for dyeing cotton fabrics under various conditions. UV-visible absorption spectra of extract, reduction rate of extracts by reducing agent, and the surface color of dyed cotton, lightfastness were examined. For the initial 20 minutes, the absorbance of indigo solution rapidly decreased. However, several hours later, the decreasing rate retarded. By repeating the dyeing process, the shade looked deeper and deeper. At $30-40^{\circ}C$, the value of K/S reached the highest point. The concentration of indigo solution in dye bath seemed to playa critical role for the reaction of the reducing agent. It was observed that the surface color of cotton fabrics was getting bluish and its degree of value and chroma seemed slightly decreased as the K/S value was increasing. The lightfastness was clearly enhanced by increasing the K/S value.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.130-140
• /
• 2018

In the bio-synthesis of poly(3-hydroxybutyrate)(PHB), which is a kind of poly(3-hydroxyalkanoate)(PHA), aimed to control the low molecular weight of PHB and obtain a telechelic PHB. As a result of incubation of R. eutropha at $30^{\circ}C$ with ethylene glycol added as a chain transfer agent, PHB content on the dry cell weight increased up to 24h, however, it decreased after that, and the molecular weight of PHB increased from 9h to 12h, and then, decreased up to 72h. The decrease of the content and the molecular weight of PHB indicates that PHB was decomposed as an energy source in bacterial cells and was incorporated into metabolic pathways. $^1H-NMR$ of the obtained PHB after incubation for 72h was measured to determine the terminal groups of the PHB during incubation. As the results of $^1H-NMR$ measurement, the peaks derived from ethylene glycol in both terminals of PHB were observed. Which indicate that the terminal reaction was caused by the addition of ethylene glycol, and that telechelic PHB having hydroxyl group at the both terminals where molecular weight was controlled was successfully synthesized.

• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.108-115
• /
• 2000

This study was designed to compare the effect of polishing on surface roughness of composite resin. We used Z100(3M) composite resin and placed the composite resin in the hole (4mm thick and 4mm in diameter) of vinyl plate and polymerized it under manufacturer's instructions. Samples were divided into 5 groups by polishing methods. Group 1 was control: resin was polymerized under glass plate, Group 2: resin was polymerized without any polishing procedure, Group 3: resin was polymerized with a polishing procedure of abrasive disc, Group 4: bonding agent was applyed in thin layer and polymerized on the polished polymerized resin surface. Group 5: resin was polymerized under transparent celluloid strip. The surface roughness of each specimen was measured with Sufacoder SEF-30D (Kosaka lab. Ltd) under 0.08mm cut off, 0.05mm/s stylus speed, ${\times}40$ horizontal magnification, ${\times}5000$ vertical magnification. The results were as follows : 1. Group 1 showed the most smooth surface in this study. 2. Group 3 showed more rough surface than Group 2. Considering the surface roughness, it would be better to make the shape completely before polymerize the resin. To finish and polish after the polymerization of resin makes less smooth surface. 3. When we use the transparent celluloid strip, minimum finishing procedures are recommended. Any polishing procedure could not recover the smooth resin surface of celluloid strip. 4. Application and polymerization of the thin layer of bonding agent on the polished surface showed the minimum surface smoothing effect.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.79-90
• /
• 2012

This study surveys the characteristics of the PU/MWNT foaming film according to foaming conditions. For this purpose, firstly, 16 kinds of PU/MWNT forming films were prepared with 4 kinds of dispersion solutions (IPA/MWNT, DMF/MWNT, MEK/MWNT, and Toluene/MWNT) and 4 kinds of blowing agents (organic I, organic II, capsule, and inorganic). The electrical resistivity of these PU/MWNT foaming films according to the dispersion solutions and blowing agents were analysed and discussed with surface profile and cell morphology of measured by SEM. And secondly, 24 kinds of PU/MWNT foaming films were also prepared with 2 kinds of IPA dispersion solution contents and 3 kinds of blowing agents with variation of the blowing temperatures and film thickness. The physical properties of the PU/MWNT foaming films such as electrical resistivity (surface and volume) and triboelectricity with cell morphology were measured and discused through the quantities of IPA, blowing agent added and also physical conditions(temperature, thickness so on) for establishing optimum foaming conditions with good electrostatic dissipation.