• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.357-361
• /
• 2006

The purpose of this study is to provide the basic information and to help producers develop more realistic, idealistic and better environment-friendly interior finishing material by identifying and reducing the awareness and preference about it between the producers and consumers. The following conclusions are based on the above results of analysis. There is a lack of awareness of the environment-friendly interior finishing material and it is urgent to develop the awareness. For the developing the awareness, the government and the authorities concerned have to educate the consumers in order that they choose objective information, have to build information network accessible to them and have to share the reliable information. And in order to get the confidence of consumers, it is necessary to make institutional devices. The scientific study which can be approved in many methods and many NGOs' participation are also needed. Especially in order to meet the consumers' demand, there should be proof of the influence of the interior finishing material on the body and diversity of the design and color of the material.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.221-231
• /
• 2012

Rayon fabrics were treated with some commercial non-formaldehyde and low-formaldehyde resins, and then their effect on the physicochemical properties of fabrics, including formaldehyde release, tear strength, shrinkage, and wrinkle recovery, were investigated respectively. Rayons treated with non-formaldehyde resin, little formaldehyde release was observed. Considering other factors, the optimal concentration of non-formaldehyde resin was shown to be 11-13%, and curing temperature was $170{\sim}175^{\circ}C$. In case of low-formaldehyde type, 9-11% resin concentration and curing temperature of $170{\sim}180^{\circ}C$ were recommended for optimal finishing condition. The choice and combination of resins and catalysts were also important factors, and preliminary considerations before resin-finishing of rayon are also important to get much better results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.125-131
• /
• 2005

Recently, to improve condition car park, using surface finishing material for variety color and property epoxy resin, urethane, cement mixed resin mortar or polymeric resin, and so on. However, it is frequent noise and wear out of tier and waterproofing materials, when the car slip or stop in car park, To minimize these cases, It is necessary that reduction of repair cost through performance long term durability of surface finishing material, improvement inside condition such as reduce dirty and car accident and ensurance the expected life of concrete slab in car park. Especially, we have not any tech for quality control, construction tech, production technology for car park surface materials, that's why park slab is not safety and suffer a loss. For this problems, this paper is to test surface finishing materials and as that result, suggest quality standard in the car park.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.622-625
• /
• 2003

본 연구의 목적은 초고층 복합건물 공사에서 마감자재 양중횟수를 산정하는 약산식을 제안하는 것이다. 그것은 양중계획 시 효율적인 데이터로 활용될 것으로 기대된다. 마감자재 양중계획은 건물이 고층화 될 수록 더욱 더 중요해 진다. 양중횟수는 "패키기"라는 방식을 통하여 기존의 방식보다 더욱더 정확하게 산정할 수 일다. "패키지"는 마감자재별 특성을 고려하여 한번에 양중할 수 있는 마감자재별 양중형식을 고려한다는 것을 의미한다. 도출된 약산식은 기준층 바닥면적과 단위면적당 실갯수라는 두 요소를 변수로 하여 도출하였다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2004년도 추계학술발표회 논문집
• /
• pp.274-275
• /
• 2004

The majority of dyes belong to the chromophoric class known as donor-acceptor systems, the essential structural feature of such systems being the presence of one or more electron donating groups conjugated to one or more electron withdrawing groups via an unsaturated bridge. The indigo molecule may be formally divided into two identical electron donor/acceptor subsystems, each containing an add number of pi electrons, two subsystems being joined by carbon-carbon double bond. Indigoid type dyes which show a strong colour change on protonation or dissociation have many potential functional applications, for example as analytical pH indicators, solvent polarity indicators, and in various imaging and reprographic systems.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.191-196
• /
• 2004

An emulsion of octadecamidoethylaminoethyl dodecate (which provides softness) and an emulsion silicone oil KF-96 (which provides lubricity) were separately synthesized. Then PP finishing softeners (SSA-7) was prepared by blending of the synthesized emulsions with beef tallow hardened oil (a softness improving agent). PP finishing treatment was carried out with the prepared SSA-7 and PP finishing resin by a one bath method, and several physical properties were tested. As a result, crease recovery, tear strength, softness, lubricity, and bending resistance were all good, indicating that the prepared SSA-7 is a good PP finishing softener.

• Composites Research
• /
• 제30권4호
• /
• pp.254-260
• /
• 2017

본 논문에서는 알루미늄과 복합재료에 대한 이종소재 접합면의 성형안전성을 위해 일정한 두께를 확보할 수 있는 0.1 mm, 0.2 mm, 0.3 mm bead의 적용 방법과 물성변화에 대해 연구하였고, 이를 검증하기 위해 더블랩 시험과 FEM 시뮬레이션으로 접착제의 두께에 따라 미치는 영향을 평가하였다. 그 결과, 접착제에 bead의 양을 1% 이상 함량이 증가함에 따라 접착 소재의 강도가 높아지고 신율이 감소함을 확인하였고, bead의 크기가 커질수록, 강성은 낮아지고, 신율은 증가함을 확인하였다.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.56-62
• /
• 2008

The biocompatibility and the fatigue strength of Co-Cr-Mo alloy are excellent, so it is used well for the material of artificial joints. The head of artificial joint needs mirror surface for reduction of abrasive resistance. Mirror finishing of Co-Cr-Mo alloy with geometrically defined single crystal diamond cutting tools is handicapped by micro chipping of tool edge. In general, it is said that the micro chipping of diamond tool is caused by work hardening of Co-Cr-Mo alloy for the cut. In the present research, mirror finishing of Co-Cr-Mo alloy by applying ultrasonic elliptical vibration cutting was carried out. The experimental results show that the micro chipping of diamond tool was suppressed and the tool wear was remarkably reduced as compared with the ordinary diamond cutting without elliptical vibration motion. It was confirmed that the good mirror surface of maximum surface roughness of 25 nmP-V was obtained for the cutting length of about 14 m. It is expected that mirror finishing of Co-Cr-Mo alloy can be achieved by applying ultrasonic elliptical vibration cutting practically.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.124-131
• /
• 2001

To find out the effect of burn out print finishing for better quality of fabric, examined processing which could make less damages on the fiber because the biggest problem is remained fibers damage after burn out print finishing. Fiber damage examined to the condition of finishing material NaHSO$_4$and H$_2$SO$_4$, 3~10min., 100~13$0^{\circ}C$, glycerin. The fiber damages evaluated the break strength and the surface condition by SEM. Among satin, pile fabric which remained fiber is silk, warp knitted fabric which remained fiber is polyester, the fibers damage level were warp knitted fabric$0^{\circ}C$, glycerin and for 6 minutes by NaHSO$_4$. When carbonized by 20%. 50% and 70% to express textile design, carbonizing rate was not effect on the fiber damage very much. There was almost no damages with glycerine, and almost no damages during 3~6minutes fixation time, 10$0^{\circ}C$ steaming heat fixation by NaHSO$_4$and H$_2$SO$_4$. Without glycerine, there were damage by hydrolysis on polyesters surface and the fiver was broken by fixation time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.198-201
• /
• 2002

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, a slurry circulation system was designed and manufactured. Its finishing characteristics was experimently investigated by various effective factors such as dry, water flow, oil flow with a slurry. From the experimental results, it was found that the materal removal and surface roughness were good in oil flow with slurry. The slurry circulation system is effective on the internal finishing of non-ferromagnetic pipe(SUS304).