• Journal of the Korean Wood Science and Technology
• /
• 제26권3호
• /
• pp.16-25
• /
• 1998

This study was carried out to compare vibrational properties and adsorption among shellac, cashew finished plate and untreated plate of Sitka spruce(Picea sitchensis Carr). By the method of statistical regression modeling, the fundamental resonance frequency of finished plate was higher than that of untreated plate. The fundamental resonance frequency of cashew finished plate was higher than that of shellac finished plate. By the method of modal analysis, mode frequency ratio of cashew finished plate was higher than that of shellac finished plate. Amounts of adsorption of finished plate was lower than that of untreated plate, and amount of adsorption of cashew finished plate was lower than that of shellac finished plate. It was clarified that the vibrational properties and adsorption of finished plate were superior to those of untreated plate. The vibrational properties and adsorption of cashew finished plate was superior to those of shellac finished plate.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.184-188
• /
• 2008

This study was carried out to investigate the flame retardant characteristics of wood finished with painting by followed in exposure conditions and flame retardant application method. According to painting types and flame retardant application methods salting occurrences undergoing an influence about the wood finished painting, confirmed. And influence to flame retardant characteristics of exposure condition on large scale not to be and occurrence quantity of the combustion gas undergone and influence In application method of flame trtardant.

• Journal of the Korean Wood Science and Technology
• /
• 제49권5호
• /
• pp.471-481
• /
• 2021

This study investigated the hygroscopicity and UV deterioration characteristics of 3 domestic and 4 imported woods using natural oil, stain, and varnish paints. In terms of hygroscopicity, it was found that the hygroscopicity of the painted wood was lower than that of the unpainted wood, and that as the number of coatings increased, the hygroscopicity decreased. In terms of anti-absorption, oil-based chemical paints showed higher resistance than water-based paints, and natural oils showed results comparable to oil-based paints. As for the UV deterioration, the amount of color change of the painted wood was lower than that of the unpainted wood, and there was no significant difference according to the number of times of painting. The amount of color change was found to be low in oil-based paints and hardwoods. Through this study, we confirmed effective moisture blocking and small color changes during painting using paints, and it is believed that wood can be protected from internal and external defects through selective and efficient painting based on data for excellent painting performance.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.83-87
• /
• 1995

Impact-bouncing height of steel balls dropped from 1m height on various floor materials were measured to evaluate impact-bouncing characteristics depending on floor materials and the effect of these properties on walkability and fatigue of humanbody. Stone and tile finished concrete floor showed the highest bouncing height of around 70%, and soil showed the lowest bouncing height of around 3%. The second highest bouncing height was about 40% which corresponded to terazo finished concrete floor and about twice as high as the bouncing height on concrete floor without finishing. The impact-bouncing height could be lowered to 15~20% by using gum tile on concrete floor. Steel showed similar bouncing height to concrete floor, and wood-based materials showed the second lowest bouncing height next to soil. Among wood-based materials, hardwood species having higher specific gravities showed relatively high bouncing height of 8~24%, softwood species having low specific gravities showed relatively lower bouncing height of 5~18%, and wood composites showed bouncing height of 8~18%. Among all the materials used in this study, wood-based floor materials corresponded to the bouncing height of 10~15% which is considered to be best for humanbody. Surface painting on wood-based materials increased the bouncing height, and the number of bouncing of steel balls after dropping from 1m height increased as the bouncing height increased.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.488-502
• /
• 2020

In this study, the moisture absorption and desorption properties presented by the Health-Friendly Housing Construction Standards of South Korea were compared using the wood of three tree species (Douglas-fir, Hinoki, Larch) and two types of wood-based materials(Plywood, WML Board^Ⓡ). The national standards for functional building materials present that the amounts of moisture absorption and desorption should be at least 65g/㎡ on average, respectively according to the test method under KS F 2611:2009. Therefore, in this study, the moisture absorption/desorption properties of materials with no treatment (Control), with punching, and with surface stain finishing and the moisture absorption/desorption property improvement effects of the treatments were compared and analyzed. According to the results of this study, it was evaluated that all five types of wood and wood-based materials tested did not satisfy the amount of moisture absorption/desorption of at least 65g/㎡, which is the performance standard for moisture absorption/desorption functional building materials, indicating that untreated wood and wood-based materials cannot be applied as functional finishing materials according to the Health-Friendly Housing Construction Standards. The surface stain finishing greatly reduced the moisture absorption and desorption rates of the materials, and the amounts of moisture absorbed and desorbed were also shown to decrease by at least two times on average. When the surfaces of the materials were punched with Ø4mm holes at intervals of 20 mm, the moisture absorption/desorption areas increased from 18% to 51%, and this increase was shown to be capable of increasing the amounts of moisture absorbed/desorbed by 29% on average at the minimum, and 81% on average at the maximum. The effects of punching were shown to be identical even in cases where the materials were stain finished. For the application of wood or wood-based materials as eco-friendly, health-friendly, and moisture absorption/desorption functional building materials hereafter, it is judged that new physical and chemical improvement studies should be conducted, and treatment methods should be developed.

• 한국가구학회지
• /
• 제27권4호
• /
• pp.335-342
• /
• 2016

In previous study, volatile organic compounds (VOCs) emission characteristics were highly affected by coating materials for wood finishing. Natural based coating materials showed that about 15~46% lower TVOC emission than typical products. In this study, long-term changes of VOCs emission characteristics from pine panel with three types of coating treatments were determined. Non-treated pine panel emitted $604.7{\mu}g/m^2{\cdot}h$ of TVOC that contained 66% of NVOC ($399.7{\mu}g/m^2{\cdot}h$) at 0 month. After 10 month, TVOC reduced 88% and 93% reduction on NVOC was observed. Natural oil and waterborne stain treated pine panel showed 61% and 77% lower TVOC, respectively, than non-treated pine panel. However, TVOC from finished pine panels showed higher TVOC emission than non-treated pine panel. All samples satisfied the VOC emission regulation (below $4,000{\mu}g/m^2{\cdot}h$) by Korean Ministry of Environment. Toluene emission regulation (below $80{\mu}g/m^2{\cdot}h$) was passed on all sample without varnish treated pine panel at 0 month. According to HB qualification standard for construction materials by Korea Air Cleaning Association (KACA), wood is not qualified to get the best tag due to high TVOC emission. At the 10 months, only non-treated pine panel could get the best tag of HB from KACA.

• 한국가구학회지
• /
• 제23권4호
• /
• pp.407-414
• /
• 2012

In order to develop the end use of cylindrical laminated veneer lumber (LVL) such as wooden crafts, the light resistance properties of natural dye-colored and finished cylindrical LVL was investigated. The study results were as follows; The cross section of LVL showed the higher light resistance than its tangential section, and the light resistance also increased with surface coated. On the other hand, LVL specimen were colored by 9 natural dyes of amur cork-tree etc., and the natural and apparent hue harmonized with wood was found after coating and light resistance test. Particularly, The dyes extracted from amur cork-tree, persimon and sappan wood showed orange color, reddish brown and red color respectively, giving an accenting effect to original wood color.

• 디자인학연구
• /
• 제18권4호
• /
• pp.155-164
• /
• 2005

가구디자인의 분야는 다른 제품디자인 분야와 다르게 순수 디자인영역과 함께 스튜디오작업을 병행하는 경우가 많다. 이러한 경우는 대량 생산하는 산업가구보다는 다품종 소량생산이나 맞춤형 주문가구, 혹은 부가가치를 극대화한 작품가구 등을 들 수 있으며, 이러한 작업은 주로 소규모의 공방에서 이루어진다. 이와 같은 소규모 가구 스튜디오에서의 디자인과 제작은 대량생산에 비해 형태와 조형성애서 비교적 자유로울 수 있으며 그에 대한 대표적 조형의 요소는 '곡선'이라고 볼 수 있다. 나무는 그 재료적 특성 상 원목의 곡선 카빙을 제외한 자유로운 곡선의 조형이 까다롭기 때문에 특별한 벤딩기법을 적용해야하는데 이를 위해서 본 연구에서는 베큠프레스의 벤딩기법의 효용성과 가능성을 연구하였다. 베큠프레스의 특징과 다양한 기능분석 및 이를 바탕으로 한 기법개발과 실험을 통해서, 특히 가구디자이너를 위한 소규모 스튜디오에서의 베큠프레스의 효율성과 생산성의 가치를 파악하고 보다 효과적인 벤딩의 작업성을 위해 적절한 충족조건 등을 찾아내고자 하였다.

• 한국가구학회지
• /
• 제26권2호
• /
• pp.122-129
• /
• 2015

In previous study, VOC emission characteristics of coating materials for wood finishing were conducted and results showed that eco-friendly products has about 15~46% lower TVOC emission than typical products. In this study, lower TVOC emitted coating materials were applied on pine and then changes of VOC emission characteristics from pine with treatments were determined. Non-treated pine emitted $604.7{\mu}g/m^2h$ of TVOC that contained 66% of NVOC ($399.7{\mu}g/m^2h$). However, $V_2$ finished pine showed no NVOC emission rather than AVOC emission that consisted of Toluene, Ethylbenzene, m,p-Xylene, o-Xylene, 1,2,4- Trimethylbenzene. All coating materials inhibited ${\alpha}$-Pinene emission which originally from pine, but waterborne stain ($W_1$ and $W_3$) showed lower disruption of that emission. Moreover, $W_3$/wood showed higher NVOC emission such as ${\alpha}$-Terpinol, Terpinen-4-ol which are known as antioxidant substrates. Based on results, VOC emission characteristic of pine was significantly affected by coating materials with negatively in terms of ${\alpha}$-Pinene emission or positively in terms of NVOC emission. Therefore, coating material is important factor for indoor air quality when it would apply on wood products. For the future study, VOC emission characteristic of coated wood will be conducted continuously.

• Journal of the Korean Wood Science and Technology
• /
• 제38권6호
• /
• pp.507-517
• /
• 2010

2006 IPCC 가이드라인에서 제안한 HWP 탄소계정 방법을 이용하여 HWP 내 탄소 저장량을 추정하였고 우리나라 국가 온실가스 인벤토리와 산림 부문에 미칠 영향을 분석하였다. 사용 중에 있는 제재목, 목질보드류, 기타 산업용 목재, 종이 및 판지를 대상으로 하여 목제품 내 탄소저장량의 변화량을 추정하였다. 1970년부터 2008년 동안 사용 중에 있는 목제품 내 이산화탄소 저장량의 연간 변화량은 접근법에 따라 -9,023 Gg $CO_2$/yr에서 4,052 Gg $CO_2$/yr으로 추정되었다. 우리나라는 목제품의 순수입국이기 때문에 탄소 축적 변화 접근법이 가장 유리한 결과를 보였다. 그러나 각 접근법이 목제품의 벌채량 및 교역량, 바이오에너지로의 목재 이용과 재활용에 미치 는 영향은 상이하게 나타나고 있다. 따라서 계정 방법에 대한 우리나라 입장을 결정할 때 국가 온실가스 인벤토리에 대한 영향뿐 아니라 미래에 추진할 산림정책 방향도 고려하여 야기될 수 있는 부정적인 영향을 최소화하는 방법을 선택해야 한다.