• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.142-142
• /
• 2015

해상에서 운용하는 항공기는 염분이 포함된 대기로 인하여 부식이 발생하기 쉬우므로 항공기 기체에 영향을 주는 부식인자를 가장 효과적으로 차단할 수 있는 도장 방안에 대한 연구가 필요하다. 따라서 본 연구에서는 이러한 해상운용 항공기의 부식방지를 위해서 염수분무실험과 밀착력실험을 통해 효과적인 도장적용 방법과 도료의 내식성을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1154-1161
• /
• 2000

Two experiments were conducted to evaluate the efficacy of cupric citrate (Cu-citrate) relative to cupric sulfate $(CuSO_4)$ as a Cu source for weanling and grow-finish pigs. In addition, the use of liver and bile Cu concentrations as indices of the bioavailability of Cu sources was investigated. Experiment one consisted of a nursery phase (35 d; initial BW=6.4 kg, final BW=21.4 kg) followed by a grow-finish phase (103 d; initial BW=21.5 kg, final BW=111.7 kg). Experiment two only consisted of a nursery phase (35 d; initial BW=6.3 kg, final BW=18.6 kg). Dietary treatments were identical for both experiments and consisted of: control (10 ppm $CuSO_4$); control+66 or 225 ppm $CuSO_4$; control+33, 66, or 100 ppm Cu-citrate. An antibiotic was included in diets for Exp. 1 but not Exp. 2. In both experiments, growth performance variables were similar for pigs receiving Cu-citrate and $CuSO_4$; however, growth performance was not improved by high concentrations of $CuSO_4$. Liver and bile Cu were increased (p<0.05) by 225 ppm $CuSO_4$; however, lower dietary concentrations of Cu from either $CuSO_4$ or Cu-citrate did not affect the Cu concentration of liver or bile relative to that observed in the control pigs. Irrespective of Cu source, there was no linear (p>0.10) increase in plasma Cu with increasing Cu concentrations in the diet for both experiments. However, the plasma Cu concentrations were highest (p<0.10) in pigs receiving diets supplemented with 225 ppm $CuSO_4$. Sixteen randomly chosen pigs per treatment in Exp. 1 were continued through the grow-finish phase. Body weight gain and feed intake were improved (p<0.10) by 66 ppm $CuSO_4$, but other dietary Cu treatments did not alter pig performance compared to the control diet. Plasma Cu concentrations were increased (p<0.10) by 225 ppm $CuSO_4$ in the growing phase and by 225 ppm $CuSO_4$ and 100 ppm Cu-citrate in the finishing phase. These data reveal no consistent effect of $CuSO_4$ on performance; therefore, it is difficult to assess the efficacy of these two Cu sources. In addition, these studies demonstrate that liver and bile Cu are not good indicators of Cu bioavailability in pigs fed adequate to pharmacological concentrations of Cu.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.1041-1046
• /
• 2010

The reactions between a Sn-3.0Ag-0.5Cu solder alloy and electroless Ni/electroless Pd/immersion Au (ENEPIG) surface finishes with various Pd layer thicknesses (0, 0.05, 0.1, 0.2, $0.4{\mu}m$) were examined for the effect of the Pd layer on the massive spalling of the $(Cu,Ni)_6Sn_5$ layer during reflow at $235^{\circ}C$. The thin layer deposition of an electroless Pd (EP) between the electroless Ni ($7{\mu}m$) and immersion Au ($0.06{\mu}m$) plating on the Cu substrate significantly retarded the massive spalling of the $(Cu,Ni)_6Sn_5$ layer during reflow. Its retarding effect increased with an increasing EP layer thickness. When the EP layer was thin (${\leq}0.1{\mu}m$), the retardation of the massive spalling was attributed to a reduced growth rate of the $(Cu,Ni)_6Sn_5$ layer and thus to a lowered consumption rate of Cu in the bulk solder during reflow. However, when the EP layer was thick (${\geq}0.2{\mu}m$), the initially dissolved Pd atoms in the molten solder resettled as $(Pd,Ni)Sn_4$ precipitates near the solder/$(Cu,Ni)_6Sn_5$ interface with an increasing reflow time. Since the Pd resettlement requires a continuous Ni supply across the $(Cu,Ni)_6Sn_5$ layer from the Ni(P) substrate, it suppressed the formation of $(Ni,Cu)_3Sn_4$ at the $(Cu,Ni)_6Sn_5/Ni(P)$ interface and retarded the massive spalling of the $(Cu,Ni)_6Sn_5$ layer.

• Journal of Pharmacopuncture
• /
• v.13 no.1
• /
• pp.87-92
• /
• 2010

Objectives:This study was performed to examine the side effect of inflammatory reactions of Pharmacopuncture lubricants (CF and JsD) using animal model. Methods:Pharmacopuncture lubricants (CF and JsD) were treated repeatedly the same point in Sprague-Dawley rats. And after finish the treatment, we obtain the tissue of muscle layer in rats where Pharmacopuncture lubricants were treated. And we observed the tissue how the change occurred in HE staining. Results: 1. There was no evidence to make inflammation induced by pharmacopuncture lubricants except 4 weeks treated group. 2. Only 4 weeks treated group(CF, JsD) were showed some infectional tissue's view in H-E staining. But it is not certain due to Pharmacopuncture lubricants. Conclusion:It appears that prolonged usage of pharmacopuncture lubricant on the specific point can induce inflammation, so we may be careful for treating time and point using pharmacopuncture lubricant in clinics.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.543-551
• /
• 2014

Objective: The purpose of this study is to identify visual perception of and satisfaction with the orange peel effect of surface. The orange peel effect is a type of finish on painted or coated surface. Background: Gloss paint sprayed on a smooth surface (such as car body, smart phone, and electric home appliances, etc.) should also dry into a smooth surface. Then, a surface resembling the texture of an orange peel can be caused by some factors. The orange peel effect can degrade user's satisfaction with a product. Method: Visual perception and emotional satisfaction were subjectively evaluated using Likert scale. The significance of orange peel effect on visual perception and satisfaction were then analyzed by the analysis of variance. The correlation between visual perception and satisfaction was also analyzed. Results: Surface roughness significantly influenced visual perception and emotional satisfaction. The level of visual perception increased and emotional satisfaction decreased with the increase of orange peel effect. Emotional satisfaction decreased with the increase of visual perception level. Conclusion: It was identified that orange peel phenomenon on surface was a very important factor for emotional satisfaction. The orange peel effect on the surface of a product should be minimized to improve the emotional satisfaction of the product. Application: The result of this study can be applied to the texture design of the body of a car, smart phones, and electric home appliances, etc.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.65-70
• /
• 2002

The rotational performance off machine tool spindle has a direct influence upon the surface finish of the finished workpiece. This running accuracy of the spindle is improved by increasing preload on the bearings, while it results in higher temperature rise and larger thermal deformation. Therefore, finding the optimal preload condition for high speed spindle is very important factors in spindle motion. in spindle motion. In this study, the effect of the preload on the roundness accuracy has been examined at the different cutting conditions. Experiments were carried out to investigate the effects of the bearing preload on the running accuracy of high speed spindle which was supported by two angular contact bearings.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.471-481
• /
• 1997

Denims were treated with neutral cellulase, acid cellulase, stone, and stone-neutral cellulase respectively at different cellulase concentrations varying treatment times in rotary washer. The effect of washing on denim was estimated by the changes in weight, color, back staining, tear strength, flex stiffness, and surface characteristics. Also the comparison of neutral cellulase, acid cellulase, stone, and stone-neutral cellulase washings was studied. Washing removes surface fibers and provides weight loss, color difference, back staining, and a decrease in tear strength and in flex stiffness. Stone-neutral cellulase washing and acid cellulase washing have a larger washing effect than neutral cellulase washing and stone washing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.505-509
• /
• 2001

When the spindle is rotated for machining the workpiece, the vibration is generated due to the spindle unbalance. This vibration affects surface finish, dimensional accuracy, tool life, and spindle bearings. To compensate this effect of the spindle unbalance, the spindle system using an EME(electro magnetic exciter)is proposed in this paper. In the proposed spindle system, the vibration due to the spindle unbalance is monitored using vibration sensors and is compensated by electromagnetic attractive forces generated in the EME which are excited by anti-direction forces corresponded with the measured unbalance. Firstly, the spindle system using an EME and control system are constructed to compensate the effect of spindle unbalance in this paper. And then the system is modeled by bond graph to analyze the system. Finally, a controller for vibration compensation due to spindle unbalance is designed and is implemented in real experimental system. As a result, experimental results show this proposed spindle system is very effective to compensate the spindle unbalance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.193-196
• /
• 2006

A carbonation shortens the endurance life of RC structure. So, to lengthen endurance life of RC structure, we use some kinds of surface-finishes. Because surface-finishes have abilities such as restraint against penetration and diffusion of CO2. In this study, we wanted to know whether we can evaluate the restrain effect of each surface-finish against carbonation with using FEM analysis. After study, we found that it is possible and we also evaluate the restrain effect of any other surface-finishes against carbonation through this process.