• Korean Journal of Biological Psychiatry
• /
• v.18 no.1
• /
• pp.25-35
• /
• 2011

Objectives : Cerebral laterality is thought to be an important marker for neurodevelopment. Prenatal testosterone could influence both cerebral laterality and 2nd to 4th finger length ratio(2D : 4D). EEG coherence and 2D : 4D were examined to investigate the relationship between prenatal testosterone level and cerebral laterality. Methods : EEG was recorded in 24 healthy subjects in the eyes closed resting state. Differences in 2D : 4D finger ratio were used to discriminate "masculine finger type" and "feminine finger type" groups. The 2D : 4D ratio was lower and greater than one for the "masculine finger type" group and "feminine finger type" group, respectively. We used coherence analysis to estimate the cortical functional connectivity. Results : There were statistically meaningful relationships among cerebral functional connectivity, sex and finger ratio. Man and masculine finger type group showed higher intra-hemispheric coherence than those of woman and feminine finger type group. Woman and feminine finger type group showed higher inter-hemispheric coherence than those of man and masculine finger type group. Conclusions : These results imply that prenatal testosterone might act as important determinants of cerebral laterality. Further examination of the relationship between 2D : 4D and EEG coherence in schizophrenia could give some clues for the neurodevelopmental hypothesis of schizophrenia genesis.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.1
• /
• pp.53-58
• /
• 2007

In an estuary, mixing and transport of contaminant sometimes occurs in the salt finger favorable condition (Hwang ang Rehmann, 2004). Linearized theory is applied to predict flow dynamics in salt finger favorable condition. The simulated results match well with previous laboratory experiments. When the density ratio is larger than 2, the heat and salt system shows $0.55{\sim}0.57$ as Turner (1967) found, and the salt and sugar system produces 0.87 of Griffiths (1980). As the ratio of molecular diffusivities of two scalars increases, the flux ratio increases. The flux and eddy diffusivity ratios decrease with increase of density ratio, and it takes longer time for flux ratio to be steady state at the higher density ratios.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.61-67
• /
• 1997

The bending performances of sloped finger-joints in Pinus densiflora S. et Z. were tested in order to improve the strength properties of finger-joint Sloped finger-cut pieces were jointed with four kinds of adhesives(resorcinol-phenol, oilic urethane, polyvinyl acetate, and polyvinyl-acryl acetate resin). The slope ratios of finger joints were 0, 0.5, 1.0, 2.0. The MOE, MOR and defletion to maximum load in bending of sloped finger-joints and solid wood specimen were measured. The results were: 1. The efficiencies of MOE to finger and sloped finger-joints were 82% or greater in every kind of adhesives except polyvinyl-acryl acetate resin adhesive and there were some effect of slope on the MOE in a sloped finger-joint for polyvinyl-acryl acetate and oilic urethane resin adhesives. 2. The effects of slope on the MOR to sloped finger-joints were showed in every kind of adhesive, because the efficiencies of MOR increased with increasing slope ratio in sloped finger-joints. The efficiencies of MOR to slope ratios of 0 and 2.0 ranged 43~65% and 76~82%, respectively. There was almost no effect of the kinds of adhesives on the MOR to the slope ratio of 2.0. 3. It was found impossible to estimate the bending strength of sloped finger-jointed Pinus densiflora S. et Z. by using MOE. The correlation coefficient(0.124) between MOE and MOR was very low and not significant at 5% level.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.65-71
• /
• 1999

The bending performance of sloped finger-jointed Rhus verniciflua were tested in order to improve the strength properties of finger-joint. Sloped finger-cut pieces were jointed with three kinds of adhesives (polyvinyl acetate, polyvinyl-acryl acetate and oilic resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The MOE, MOR and deflection to maximum load in bending of sloped finger-joints and solid wood specimen were measured. The results were : 1) The efficiencies of MOE to finger and sloped finger-joints to the solid wood were almost same in the three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin) and there were some effect of slope on the MOE in a sloped finger-joint for three kinds of resin adhesives. 2) There was the effect of slope on the MOR in sloped finger-joints in every kind of adhesive. The efficiencies of MOR in slope ratios of 0 and 2.0 ranged 65-79%, respectively. There was also a slight effect of the kinds of adhesives on the MOR. However, the efficiencies of deflection to the urethane resin adhesive were much less than those of polyvinyl acetate, polyvinyl-acryl acetate resin adhesives except the slope ratio of 0. 3) It might be impossible to estimate the bending stregth of sloped finger-jointed Rhus verniciflua by using MOE. The correlation coefficient(0.192) between MOE was very low and not significant at 5% level.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.20 no.2
• /
• pp.21-26
• /
• 2014

Background: In the present study, we examined gender roles, job satisfaction, and the relationship between the two among orthopedic manual physical therapists (OMT). Methods: The subject of this study was 208 physical therapists working in the general hospital and rehabilitation in Daejeon. In order to examine the nature of the subject, we calculated the ratio of second finger length for fourth finger of predominant hand and completed the questionnaire to determine the general characteristics and job satisfaction. Results: The OMT and NOMT (non OMT) digit ratio results were not significantly different (p>.05). Digit ratio based on gender was also not significantly different between groups (p>.05). Among the job satisfaction survey items, OMT was significantly higher than NOMT in terms of Pride, Reflection of opinions, aptitude match, and field satisfaction (p<.05); however, there were no significant differences between groups for the remaining items. Digit ratio was not significantly related to any of the job satisfaction items (p>.05). Conclusions: We determined that gender roles had a limited influence on selecting and continuing with orthopedic physical therapy.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1613-1616
• /
• 1997

In order to develop a human hand mechanism, a 5-bar finger with redundant actuation is designed and implemented. an optimal set of acutator locations and link lengths for the case of one redundant actuator is obtained by employing a composite design index which simulataneously consider several performance indices such as workspace, isotropic index, and force transmission ratio. Each joing is driven by an compact actuator mechanism having ultrasonic motor and a gear set with poeneiometer an controlled by VME Bus-based control system.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.9-12
• /
• 2001

Point pattern matching schemes for finger print recognition do not guarantee robust matching performance for finger print images of poor quality. We present a finger print recognition scheme, where transformation parameter of matched ridge pairs are estimated by Hough transform and the matching hypothesis is verified by a new measure of the matching degree using selective directional information. Proposed method may exhibit extremely low FAR(False Accept Ratio) while maintaining low reject ratio even for the images of poor quality because of the robustness to the variation of minutia points.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.6
• /
• pp.1145-1154
• /
• 2012

Recent research has been mostly focused on the differences of prenatal sex hormone could affect the ratio of the lengths of the second to fourth digits (2D:4D) as well as the rate of several physiological characteristics. It has been suggested that digit ratios are thought to be associated with either higher prenatal testosterone levels or greater sensitivity to androgens, or both. However, a study of person with disabilities are rare in Korea. The purpose of this study was to compare patterns of the ratio (2D:4D) of the lengths of the second and fourth digits in persons with disabilities and students without disabilities. Also, we empirically analyze the characteristics of persons with disabilities. We found that finger length ratio (2D:4D) of men with disabilities and student without disabilities were lower than women with disabilities and student without disabilities. Therefore, it could be confirmed that finger length ratio (2D:4D) is sexually dimorphic trait. There were no correlations between finger length ratio (2D:4D) and age group in persons with disabilities. Therefore, as with person without disabilities, the 2D:4D ratio was negatively associated with a growth process of persons with disabilities. Finally, There was no difference correlations between finger length ratio (2D:4D) and level of disability in persons with intellectual disabilities. From this, one possible explanation for this is that if finger length ratio (2D:4D) is related to person with disability then current classification of the level of disability deserves further investigation.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.503-509
• /
• 2013

Objective: The purpose of this study is to analyze the individual finger force between dominant hand and non-dominant hand and to investigate an effect of the individual finger on the total grip strength depending on dominant hand and non-dominant hand. Background: Many studies on the ratio of the grip force between dominant hand and non-dominant hand has been researched. While a 10% rule which is a ratio of the grip force between dominant hand and non-dominant hand has been applied in most studies, studies on the rate of the individual finger force between dominant hand and non-dominant hand have been insufficiently researched. Method: The experiment was preceded with 17 subjects (male, mean 25.8 ages). The individual finger force and total grip strength were measured using pliers being able to change the grip span from 45 to 80mm. Results: The difference of total grip strength between dominant hand and non-dominant hand is following 10% rule. However, the difference of individual finger force between dominant hand and non-dominant hand are not same as the difference of total grip strength. Especially in the case of grip span with 50mm, the differences between total grip strength, index finger, middle finger, ring finger, and little finger were $9.87{\pm}14.80%$, $8.95{\pm}37.17%$, $13.71{\pm}28.27%$, $6.77{\pm}24.35%$, $39.29{\pm}42.46%$, respectively, with p=0.018 of statistical significance. Additionally, the results of regression analysis in 50 and 60mm of grip span showed that the difference in ring finger affected the most to the total grip strength; and the effects followed in order of index finger, middle finger, and little finger. Conclusion: Our study suggests that an effect of individual finger and grip span of pliers have to be considered when explaining the difference of the total grip strength between dominant hand and non-dominant hand. Application: This result is expected to be used for designing ergonomic hand tool.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.3
• /
• pp.81-88
• /
• 2016

PURPOSE: This study was aimed at investigating the types of gender roles and the relationship between gender roles and job satisfaction among neurological physical therapists. METHODS: The study subjects were 169 (male 74, female 95) neurological physical therapists working at general hospitals or rehabilitation centers in the Daejeon Metropolitan City area, South Korea. To identify job satisfaction scores, the subjects completed a questionnaire, and a vernier caliper was used by a trained examiner to measure the lengths of the subjects' index and ring fingers (i.e., digitus secundus manus and digitus annularis, respectively) to examine gender roles. The index to ring finger length ratio (i.e., 2D:4D ratio) was calculated using a personal computer. An independent t-test was performed to compare the finger length ratio and job satisfaction of male group with that of the female group and a correlation analysis was performed to examine job satisfaction by gender roles. RESULTS: Finger length ratio is lower in males than in females. However, there was no significant difference statistically (p>.05). Regarding job satisfaction by gender, males were more satisfied with their jobs than females (p<.05). However, there were no significant correlations between job satisfaction and gender roles (p>.05). CONCLUSION: It cannot be concluded that bias against gender roles is a contributing factor for neurological physical therapists being satisfied with their job, and thus bias against gender roles among neurological physical therapists should be removed.