• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.2
• /
• pp.163-170
• /
• 2013

The fine-particles, moisture and variety of hazardous gases are produced during electronic manufacture process. Most of the fine-particles are 0.1~10 ${\mu}m$ in size and the hazardous gases such as HF, $SiH_4$, CO, $NH_3$, etc. seriously affect environment, human's body and manufacturing process. To remove these characterized gases and fine-particles, Water-Cyclone designed and tested for removal efficiency on fine-particles and $NH_3$ under -980Pa negative pressure condition. As a result, under 0.1~1.0 $m^3/min$ flow condition, the efficiency on 5 ${\mu}m$ particles was 80~96%, 10 ${\mu}m$ particles was 86~96%, and 20 ${\mu}m$ particles was 91~99%. Besides, the removal efficiency on soluble gas $NH_3$ was 56.5% at 0.5m3/min and 79.1% at 1.0m3/min under 500 ppm flow concentration and 70.0% at 1.0 $m^3/min$ under 1,000 ppm flow concentration. Therefore, on particles, as the flow rate and particle size increased, the collection efficiency rate was increased. On soluble gas, as the flow rate increased, the removal efficiency was increased under the same concentration.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.2
• /
• pp.131-142
• /
• 2015

This study investigated physicochemical and optical characteristics for three episodes of Asian dust, stagnant haze and long-range transport haze and for one clean day. $PM_{10}$ mass concentration during Asian dust and two haze days was increased by 2~9 times compared to that of clean episode. During Asian dust episode, coarse particle concentration was increased and the mass concentration of calcium in a coarse mode ($1.8{\sim}10{\mu}m$) was $5.4{\mu}g/m^3$ which was 7 times higher than that of clean episode. The calcium was presented as a form of $CaCO_3$ in a coarse mode. During the two haze episodes, fine particle (< $1.8{\mu}m$) concentration was increased and secondary inorganic pollutants such as sulfate, ammonium and nitrate composed of 90% of the total ions. $(NH_4)_2SO_4$ and $NH_4NO_3$ were dominant in a fine mode for stagnant haze episode. But they were the most dominant form in both fine mode and coarse mode for long-range transport haze episode. According to the optical properties for each episode (Asian dust, stagnant haze and long-range transport haze) were classified as dust, black carbon and mixture, respectively.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.777-784
• /
• 2015

This study investigates weekday/weekend characteristics of $PM_{10}$ and $PM_{2.5}$ concentration and metallic elements in Busan in the springtime of 2013. $PM_{10}$ concentration on weekday/weekend were 77.54 and $67.28{\mu}g/m^3$, respectively. And $PM_{2.5}$ concentration on weekday/weekend were 57.81 and $43.83{\mu}g/m^3$, respectively. Also, $PM_{2.5}/PM_{10}$ concentration ratio on weekdays/weekend was 0.75 and 0.65, respectively. The contribution rates of Na to total metallic elements in $PM_{10}$ on weekday/weekend were 38.3% and 38.9%, respectively. It would be useful in control effectively with management of urban fine particle to understand characteristics of fine particle concentration on weekday/weekend.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.2
• /
• pp.167-177
• /
• 2003

The number size distribution of urban aerosols ranging from 0.02 to 20 ${\mu}{\textrm}{m}$ in diameter was measured by using a scanning mobility particle sizer (SMPS) system and an aerodynamic particle sizer spectrometer (APS) at Seoul from November 30,2001 to January 14, 2002. The gaseous species such as CO, NO, NO$_2$, and $O_3$ were also continuously monitored. The daily average concentration of urban aerosols sorted into three groups (0.02~0.1 ${\mu}{\textrm}{m}$, 0.1~1 ${\mu}{\textrm}{m}$ and 1~10 ${\mu}{\textrm}{m}$) and the typical number, surface, and volume distributions of urban aerosols were discussed in this paper. The weekly variation of aerosol concentration was compared with those of gaseous concentrations. relative humidity, and visibility. The results showed that the particle number concentration seemed to increase in the morning and the number concentration of fine particles less than 1 fm in diameter seemed to increase when the concentrations of CO, NO, and NO$_2$ were high. The number concentration of fine particles was relatively high when the relative humidity was greater than 70％ during the increasing period of relative humidity. The visibility was weakly correlated with the concentration of aerosols ranging 0.1 to 1 ${\mu}{\textrm}{m}$, and the number size distribution for high visibility episode was apparently different from that for low visibility episode.

• YAKHAK HOEJI
• /
• v.32 no.5
• /
• pp.362-369
• /
• 1988

Monthly variation of mutagenicity by airborne particulate were studied according to particle size of the particulate. Airborne particulates were collected in Shinchon of Seoul which is commocial and traffic area in 1986. And those were separately collected into two parts such as fine particle (less than $2.5{\mu}m$ aerodynamic diameter) and coarse particle (greater than $2.5{\mu}m$). Extractable organic matters(EOM) were extracted and mutagenicity of the EOM was tested in Salmonella thyphimurium TA 98 by Ames method. While the concentration of coarse particle did not show the seasonal variation, that of fine particle showed great seasonal variation. The contents and mutagenicity of EOM in fine particles were higher than those of coarse particles. So fine particles were expected to contribute to the 90% of mutagenicity in atmosphere by suspended particulates. The content of EOM and mutagenicity by suspended particulates in atmosphere were highest in January all the year around and also higher as much as 6 and 30 times than in July, respectively.

• Journal of Powder Materials
• /
• v.9 no.2
• /
• pp.89-95
• /
• 2002

Spherical fine powders of tungsten oxide powders were prepared by the emulsion evaporation method. The characteristics of the powders prepared were examined by means of TGA, X-ray diffraction, SEM and image analysis. The emulsions were prepared by fast mixing of aqueous phase containing tugsten and the organic phase which composed of kerosene, surfactant, and paraffin oil. Precursors were made by evaporating the emulsionin the kerosene bath at $160^{\circ}C$, and then calcined at $650^{\circ}C$ in order to produce tungsten oxide powders. The average particle size of the tungsten oxide powders was $0.5\mutextrm{m}$ and their shapes were spherical at the both case of w/o and o/w type emulsions. As the HLB value of the surfactant increased and the concentration of tungsten ions decreased the mean particle siqe of tungsten oxide powders decreased whereas agglomerationsize increased. The optimum concentration of Span 80 was 8 percent by volume, and the optimum stirring speed in the emulsion formation was 5000 rpm in order to obtain fine and well dispersed $WO_3$ powders.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.65-69
• /
• 2003

Many researches on fabrication process for BSCCO precursor powders have been developed for high J$_{c}$ BSCCO-2223 tape. Spray pyrolysis method for fabrication of precursor powder has many advantages, such as high purity, fine particle size and low carbon content of BSCCO precursor powder. Fine, spherical powders were prepared by ultrasonic spray pyrolysis from the aqueous solution of metal nitrates. BSCCO precursor powders were synthesized with various solutes concentration and heat treatment conditions. Average particle size for spray pyrolysis powders was $1.5∼3\mu\textrm{m}$. Bi-2223/Ag tape was prepared by PIT method and followed by various sintering conditions. BSCCO precursor powders were characterized by XRD, SEM, EDS, Carbon content and particle size analysis.s.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.533-542
• /
• 2007

The general characteristics of fine particle and meteorological analysis of high $PM_{10}$ concentration day which was over $100{\mu}g/m^3$ in busan were investigated for period of 2002 to 2006. Annual mean concentration including Asian dust day was $68.7{\mu}g/m^3$ in 2002, $54.6{\mu}g/m^3$ in 2003, $60.4{\mu}g/m^3$ in 2004, $58.3{\mu}g/m^3$ in 2005 and $58.8{\mu}g/m^3$ in 2006, respectively. Seasonal mean concentration was $73.4{\mu}g/m^3$ in Springtime, $56.8{\mu}g/m^3$ in Summertime, $55.5{\mu}g/m^3$ in Wintertime and $54.4{\mu}g/m^3$ in Falltime, respectively. Mean concentration for land use was 69.2 $37.0{\mu}g/m^3$ in industrial area, 64.2 $35.5{\mu}g/m^3$ in rural area, 62.6 $34.4{\mu}g/m^3$ in commercial area and 55.3 $33.8{\mu}g/m^3$ in residential area, respectively. Frequency of synoptic pattern for high $PM_{10}$ concentration day was 18 days(16.7%) in I type, 27 days(25.0%) in II type, 10 days(9.3%) in III type, 5 days(4.6%) in IV type, 13 days(12.0%) in V type and 29 days (26.9%) in VI type, respectively. Frequency of long range transport sector for high $PM_{10}$ concentration day was 9 days(8.3%) in I type, 64 days(59.5%) in II type, 34 days(31.5%) in III type, 1 days in IV type, 0 days, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.5
• /
• pp.437-448
• /
• 2015

The purpose of this study is to present the source contribution of the fine particles ($PM_{2.5}$) in Chungju area using the CMB (chemical mass balance) method throughout the four seasons in Korea. The Chungju's annual average level of $PM_{2.5}$ was $48.2{\mu}g/m^3$, which exceeded two times higher than standard air quality. Among these particles, the soluble ionic compounds represent 54.2% of fine particle mass. Additionally, the OC concentration in Chungju stayed similar to other domestic cities, while the EC concentration decreased significantly compared to other domestic/international cities. The concentration of sulfur represented the highest composition (8%) among the fine particle compounds. According to the CMB results, the general trend of the $PM_{2.5}$ mass contributors was the following: secondary aerosols (50.5%: ammonium sulfate 26.5% and ammonium nitrate 24.0%) > gasoline vehicle (18.3%) > biomass burning (11.0%) > industrial boiler (6.0%) > diesel vehicles (4.4%). The contribution of the secondary aerosols was the main cause than others. This impact is assumed to be emitted from air pollutants of urban cities or neighbor countries such as China.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E3
• /
• pp.99-120
• /
• 2003

Visibility impairment in an urban area is mainly caused by airborne fine particulate matters. Visibility in a clean air environment is more sensitive to the change of PM$_{2.5}$ particle concentrations. However, a proportionally larger reduction in fine particle concentration is needed to achieve a small increment of visibility improvement in polluted areas. Continuous optical monitoring of atmospheric visibility and extensive aerosol measurements have been made in the urban atmosphere of Kwangju, Korea. The mean for fine particulate mass from 1999 to 2002 at Kwangju was measured to be 23.6$\pm$20.3 $\mu\textrm{g}$/㎥. The daily average seasonal visual range was measured to be 13.1, 9.2, 11.0, and 13.9 km in spring, summer, fall, and winter, respectively. The mean light extinction budgets by sulfate, nitrate, organic carbon, and elemental carbon aerosol were observed to be 27, 14, 22, and 12%, respectively. It is highly recommended that a new visibility standard and/or a fine particle standard be established in order to protect the health and welfare of general public. Much more work needs to be done in visibility studies, including long-term monitoring of visibility, improvement of visibility models, and formulating integrated strategies for managing fine particles to mitigate the visibility impairment and climate change.e.