• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.447-455
• /
• 2019

When constructing LNG storage structures using the cast-in-place method in extreme areas, the construction cost and time may be increased due to the poor working environments and conditions. Therefore, demand for modular energy storage tanks is increasing. In this study, we propose using an SCP module as an alternative for lighter-weight LNG storage tanks. The purpose of this study is to evaluate the feasibility of LNG storage outer tanks by performing bending tests on the thickness of composite steel plate concrete under field conditions. The loads on specimens with thicknesses of 100 mm and 200 mm were linearly increased to the design final loads of 413 kN and 822 kN, respectively. The slope was rapidly changed, and fracture occurred. The two test conditions showed linear behavior until the steel plate yielded, and after an extreme load behavior, sudden yielding of the steel plate yield occurred in the SCP bending test according to the INCA guidelines. The results satisfied the design flexural load and showed the possibility of using the specimens in a modular LNG outer tank. However, it is necessary to evaluate the structural performance of the SCP by performing compression and shear tests in future research.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.103-109
• /
• 2017

Alginate lyase from Streptomyces violaceoruber was purified by DEAE sephacel chromatography and SP sepharose chromatography. The specific activity of the purified enzyme was 14.6 units/mg protein, representing a 40.6-fold purification of the crude extract. The final preparation thus obtained showed a single band on Tricine-SDS polyacrylamide gel electrophoresis whose molecular weight was determined to be 23.3 kDa. The polyMG block of sodium alginate was hydrolyzed by the purified alginate lyase and then separated by activated carbon column chromatography and bio gel P-2 gel filtration. The main hydrolysates were composed of hetero type M/G-oligosaccharides with the degrees of polymerization (D.P.) being 6 and 8. To investigate the effects of hetero type M/G-oligosaccharides from the sodium alginate on the growth of some intestinal bacteria, cells were cultivated individually on the modified-MRS medium containing D.P. 6 and 8 M/G-oligosaccharides. B. longumgrew 4.25-fold and 6.44-fold more effectively by the treatment of D.P. 6 and 8 M/G-oligosaccharides compared with those of standard MRS medium. In addition, B. bifidumgrew 3.3-fold and 5.4-fold more effectively by the treatment of D.P. 6 and 8 M/G-oligosaccharides. In conclusion, D.P. 8 was more effective than D.P. 6 hetero M/G-oligosaccharides as regards the growth of Bifidobacteriumspp. and Lactobacillus spp.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.273-283
• /
• 2018

Two diet energy levels (high or low) and two bedding material (rice husk or saw dust) treatments were designed for either male or female slow-growing Korean meat-type chicken (Hanhyop 3) to make totally eight treatments for 11~75 d feeding trial. Body weight gain (BWG) were influenced by energy levels, sex of bird and bedding material type. There were interaction effect among those three factors. Feed intakes (FI) by male bird during each and overall periods were higher than those by female. Diet energy levels and bedding material affected the FI only during final 56~75 d period, of which FI of high energy diet was higher in male whereas that of low energy diet was higher in female. Although feed conversion ratio (FCR) was improved by high energy diet, the better FCR has dissipated during 41~75 d, when the most of overall BWG were achieved. Apparent total tract retention (ATTR) of nutrients were higher in male than those in female birds with exception on fat ATTR. Fat ATTR was improved when fed low energy diet regardless of the sex of birds. Both energy levels and sex of bird influenced the color of breast. Thiobarbituric acid reactive substances (TBARS) value of female thigh was higher than that of male. Levels of moisture and P in female thigh were lower although level of fat in female breast was higher than those in male, respectively. This study showed that diet energy levels for Hanhyop 3 chicken, especially during 41~75 d, should be differently formulated between male and female bird.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.86-95
• /
• 2019

Recently, the applications of carbon fiber have been broader than ever when it comes to such industrials as automobiles, ships, aerospace, civil engineering and architecture because of their lightweight-ness and high mechanical properties. This study analyzed mechanical properties and flexural behavior of carbon fiber reinforced cement composites(CFRC) with different fiber contents and fiber lengths, and also impact resistance by natural drop test on mortar specimens was compared and examined. In addition, contents of carbon fiber(CF) were varied by 0.5%, 1.0%, 2.0% and 3.0%. Fiber lengths was used for 6 mm and 12 mm, respectively. As a result of the test, the flow value was very disadvantageous in terms of fluidity due to the carbon fiber ball phenomenon, and the unit weight was slightly reduced. In particular, the compressive strength was decreased with increasing carbon fiber contents. On the other hand, the flexural strength was the highest with 12 mm fiber length and 2% fiber content. As the results of the impact resistance test, the specimens of plain mortar takes about 2~3 times to final fracture, while the specimens of CFRC is somewhat different depending on the increase of the fiber contents. However, when the fiber length is 12 mm and the fiber content is 2%, the impact resistance was the highest.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1407-1413
• /
• 2019

Objective: This experiment aimed to investigate the effect of different sources and inclusion levels of dietary fat on productive performance and egg quality in laying hens raised under hot environmental conditions. Methods: A total of 480 Hy-Line Brown laying hens at 31 wk of age were randomly allotted to 1 of 5 experimental diets. The control diet contained 2,800 kcal/kg nitrogen-corrected apparent metabolizable energy with no fat addition. Four additional diets were prepared by adding 2.0% or 4.0% of animal fat (AF) or soybean oil (SO). Energy and nutrient concentrations were consistent among all diets. Diets were fed to hens for 4 weeks. Average daily room temperature and humidity were $26.7^{\circ}C{\pm}1.52^{\circ}C$ and $77.4%{\pm}4.50%$. The heat stress index was approximately 76, indicating that hens were raised under heat stress conditions. Results: Final body weight (BW) was greater (p<0.05) for hens fed diets containing 2.0% or 4.0% AF than for those fed the control diet or diets containing 2.0% or 4.0% SO. The BW gain and feed intake were greater (p<0.05) for hens fed diets containing additional AF or SO than those fed the control diet. Eggshell thickness was the greatest (p<0.05) for hens fed the control diet, but the least (p<0.05) for hens fed diets containing 4.0% SO. Egg yolk color was the greatest (p<0.05) for hens fed the control diet, but the least (p<0.05) for hens fed diets containing 4.0% SO. Conclusion: Inclusion of supplemental fat (AF and SO) in diets exhibits preventative effects on BW loss for hens raised under hot environmental conditions when energy and nutrient concentrations in diets were maintained. The effects were greater for AF than for SO. However, inclusion of supplemental fat in diets decreases eggshell thickness and egg yolk yellowness, possibly due to a reduction in Ca absorption and intake of egg yolk colorants.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.456-465
• /
• 2019

PHEV(Plug in Hybrid Electric Vehicle) and BEV(Battery Electric Vehicle) equip high voltage batteries to drive motor and vehicle electric system. Those vehicle require OBC(On-Board Charger) for charging batteries and LDC(Low DC/DC Converter) for converting from high voltage to low voltage. Since the charger and the converter actually separate each other in electrical vehicles, there is a margin to reduce the vehicle weight and area of installation by integration two systems. This paper studies a 1.5kW LDC converter that can be integrated into an OBC using an isolated current-fed converter by simplifying the design of LDC transformers. The proposed LDC can control the final output voltage of the LDC by using a fixed arbitrary output voltage of the bidirectional buck-boost converter, so that Compared to the existing OBC-LDC integrated system, it has the advantage of simplifying the transformer design considering the battery voltage range, converter duty ratio and OBC output turn ratio. Prototype of the proposed LDC was made to confirm normal operation at 200V ~ 400V input voltage and maximum efficiency of 91.885% was achieved at rated load condition. In addition, the OBC-LDC integrated system achieved a volume of about 6.51L and reduced the space by 15.6% compared to the existing independent system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.3
• /
• pp.405-412
• /
• 2019

Objective: This experiment was conducted to determine the chemical composition, digestible energy (DE) and metabolizable energy (ME) contents of corn germ meals (CGM) and to develop equations to predict the corresponding energy contents based on the chemical characteristics of individual CGM. Methods: Sixty-six barrows (initial body weight = $51.3{\pm}4.6kg$) were allotted to 11 diets including a basal diet and 10 CGM test diets in a completely randomized design. In the test diets, CGM was included in replacement of 30% of the energy-providing ingredients in the basal diet, resulting in a final inclusion rate of 29.1%. Each diet was fed to 6 barrows housed in individual metabolism crates for a 7-d acclimation period followed by a 5-d total but separate collection of feces and urine. Results: Considerable variation was observed in acid-hydrolyzed ether extract, ether extract, ash, calcium (Ca) and total phosphorus contents among the CGM samples. On dry matter (DM) basis, the DE and ME contents of the CGM ranged from 10.22 to 15.83 MJ/kg and from 9.94 to 15.43 MJ/kg, respectively. The acid detergent fiber (ADF) contents were negatively correlated with the DE and ME contents of CGM samples. The best-fit prediction equations for the DE and ME values (MJ/kg DM) of the 10 CGM were: DE = 26.85-0.28 insoluble dietary fiber (%)-17.79 Ca (%); ME = 21.05-0.43 ADF (%)-11.40 Ca (%). Conclusion: The chemical compositions of CGM vary depending on sources, particularly in ether extract and Ca. The DE and ME values of CGM can be predicted based on their chemical composition in growing pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8
• /
• pp.1161-1171
• /
• 2019

Objective: The current study aimed to replace soybean oil in broiler diets with linseed oil, which is rich in omega-3 fatty acid supplemented with pomegranate peel extract (PPE) and measured its effect on broiler performance, carcass traits, lipid profile, as well as fatty acids composition, phenols and flavonoids content of broiler muscles and immunity of broiler chicks. Methods: A total of 300 1-day-old Cobb chicks were randomly allotted into six experimental groups, T1 fed on basal diet with soybean oil without any additives, T2 fed on basal diet with soybean oil with addition of 0.5 g/kg diet PPE, T3 fed on fed on basal diet with soybean oil with addition of 1 g/kg diet PPE, T4 fed on basal diet with linseed oil without any additives, T5 fed on basal diet with linseed oil with addition of 0.5 g/kg diet PPE and T6 fed on basal diet with linseed oil with addition of 1 g/kg diet PPE. The PPE supplementation with 0.05% improved final body weight with either soybean oil ration or linseed oil ration. Results: The PPE improved carcass dressing percentage in comparison with the control groups. Body fat levels decreased with increasing PPE levels, especially with a linseed oil diet. Replacing soybean oil with linseed oil decreased the total cholesterol and triacylglycerol levels in broiler serum. The PPE supplementation decreased serum total cholesterol levels and increased high-density lipoprotein cholesterol levels. The content of the breast muscle alpha linolenic acid improved after replacement of soybean oil with linseed oil in broiler diets. PPE supplementation increased the phenol and flavonoid content in broiler meat and increased lysozyme activity. Conclusion: Replacing soybean oil with linseed oil in broiler diets with the addition of PPE enriched muscle meat with omega-3 fatty acids and antioxidants and improved broiler immunity and their serum lipid profile.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.289-305
• /
• 2021

Purpose: The purpose of this study is to check the importance of higher level, sub higher level and lower alternative factor and the factor for relieved life and also check the comprehensive priority in executed "Safety and relieved life level improvement of apartment house residents by AHP analysis". Method: The safety management evaluation elements and alternatives have been arranged as hierarchical structure based on the preceding studies and the advice of experts for the maintenance and system of apartment house in this study. Study model is used for the survey of pair wise comparison composition targeting experts and AHP analysis method is used for alternative plan ranking, etc. Result: The response result of survey secured the consistency and it is confirmed that safety inspection for apartment house electricity facility is most important for higher level, safety inspection, detailed inspection and diagnosis evaluation are most important for sub higher level and plumbing equipments is most important for alternatives based on the analysis result of relative weight comparison for sub higher level and alternatives for final goal attainment of the study. Conclusion: Plumbing equipments, crime prevention safety and electrical safety are shown as top priority alternatives when observe it with expert manager's point of view for apartment house. It shows that securing the importance of living safety accident and deciding the level of relieved life can be improved are the alternatives of pre-prevention and management strengthening.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.671-678
• /
• 2021

In a previous study, technology protection levels were set on a qualitative basis. That study lacked quantitative standards, so here, we conduct a study to complement the previous study and to present an objective standard. This paper provides a method of setting a technical protection level that applies statistical analysis. To set the technology protection level, statistical analysis of six technical survey items is performed first. Second, the technical survey items are analyzed by AHP to quantify the opinions of experts in order to derive weights for each technical survey item. Finally, by using the normal distribution scatter map and median calculation method, the technology protection level is selected in three stages using the final detailed factor technology score reflecting the weight. The technology protection level methodology developed through this study is the first methodology with objectivity that can evaluate defense technology by level. If this methodology is applied in practice, it is believed that it will provide a scientific and quantitative technology value judgment criterion when setting the technology protection level in the future.