• 한국물환경학회지
• /
• 제18권3호
• /
• pp.253-260
• /
• 2002

The purpose of this research was to describe the mechanisms and prevention of initial degradation in turbidity of the sand filter effluent. The method used was by adding a coagulant (PAC) to the sand filter after backwashing as a means of reducing turbidity. It was found that adding 80 mg/L of PAC solution to the sand filter was very effective in improving the initial effluent turbidity. A turbidity removal efficiency of 99 % was observed in the initial term period as compared to a 70% efficiency without PAC addition. The PAC solution added to the sand filter resulted in high aluminum concentration at the upper layer as compared with the bottom layer of the sand filter column. A change in the zeta potential to a strong positive-ions at upper layer was observed at this time but only a small change was obtained at the bottom. This result showed that the zeta potential of the sand was changed to positive with PAC coating. The effect of pH on zeta potential with PAC addition was also investigated. Zeta potential was greatly changed to positive-ion at pH 4~6. A series of experiments was then conducted in this study to optimize the pH of the PAC solution to be added to the sand filter after backwashing. The removal efficiency of turbidity was found to be highest at pH 5. This result suggested that hydrolyzed aluminium species attached to the surface of the sand enhanced the removal of turbidity of the effluent.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.32-39
• /
• 2005

원자력연구시설의 핫셀 내 바닥이나 장치표면에 부착된 방사성 오염입자의 제거를 위해서 PFC 제염기술을 적용한다. 고가인 PFC 제염용액의 재사용을 위해서는 여과장치의 개발이 필요하고 제염종료 후 이차폐기물의 양을 최소화할 필요가 있다. 여과막을 이용한 입자의 제거효율 측면에서 보면 Ceramic, PVDF, PP 막 모두가 $95\%$ 이상의 높은 여과 성능을 보였다. 기공 크기가 같은 동일 여과막에서는 입자가 크거나 공급되는 압력이 높을수록 좀더 성공적인 입자의 제거효율을 나타내었다. 투과 성능은 PVDF 막이 가장 높은 수준을 나타내었고 Ceramic과 PP 막에서는 다소 낮은 성능을 보였다. PVDF 막은 낮은 압력과 짧은 여과시간으로 최대(한계) 투과량에 도달함을 확인하였다. Ceramic 막은 모의입자의 제거효율은 높지만 다소 낮은 투과 성능을 나타냈다. 또한, 막 자체의 비싼 가격과 쉽게 부서지는 성질의 단점을 지니고 있지만 무기화합물의 재질로 되어있기 때문에 알파방사능 환경에서 $H_2$ 가스를 발생하는 고분자 막인 PVDF, PP 막과 비교하여 훨씬 안정적이므로 실제 핫셀에 적용 가능함을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.313-322
• /
• 2020

This study focuses on a prediction approach of compaction compensation grouting efficiency in sandy soil. Based on Darcy's law, assuming that the grouting volume is equal to the volume of the compressed soil, a two-dimensional calculation model of the compaction compensation grouting efficiency was improved to three-dimensional, which established a dynamic relationship between the radius of the grout body and the grouting time. The effectiveness of this approach was verified by finite element analysis. The calculation results show that the grouting efficiency decreases with time and tends to be stable. Meanwhile, it also indicates that the decrease of grouting efficiency mainly occurs in the process of grouting and will continue to decline in a short time after the completion of grouting. The prediction three-dimensional model proposed in this paper effectively complements the dynamic relationship between grouting compaction radius and grouting time, which can more accurately evaluate the grouting efficiency. It is practically significant to ensure construction safety, control grouting process, and reduce the settlement induced by tunnel excavation.

• Environmental Engineering Research
• /
• 제9권5호
• /
• pp.193-200
• /
• 2004

A study of the treatment of piggery wastes using a multilayered metal-activated carbon system followed by carbon bed filtration was carried out at bench scale. From the physicochemical properties obtained from samples treated with aqueous solutions containing metallic ions such as Ag$^+$, Cu$^{2+}$, Na$^{-}$, K$^+$ and Mn$^{2+}$, main inspections are subjected to isothem shape, pore distribution with micropore, SEM and EDX. Multilayered metal-activated carbons were contacted to waste water to inwestigate the simultaneous catalytic effect for the COD, BOD, T-N and T-P removal. From these removal performance was achieved. The high efficiency of the multilayered metal-activated carbon bed, satisfactory removal performance was achieved. The high efficiency of the multilayered metal-activated carbon bed was derermined by the properties of this material for trapping, catalytic effect and adsorption of organic solid particles.

• Advances in Energy Research
• /
• 제3권3호
• /
• pp.181-194
• /
• 2015

In this work, an experimental study of the gasification on wood was carried out in downdraft type fixed bed Gasifier attached with 10 kW duel fuel diesel engine. The main objective of the study was to use wood as the biomass fuel for downdraft Gasifier and to evaluate the operating parameter of gasifier unit to predict its performance in terms of gas yield and cold gas efficiency. The influence of different biomass on fuel consumption rate, gas yield and cold gas efficiency was studied. Composition of producer gas was also detected for measuring the lower heating value of producer gas to select the feed stock so that optimum performance in the existing gasifier unit can be achieved. Under the experimental conditions, Lower heating value, of producer gas, cold gas efficiency and gas yields, using wood as a feed stock, are $4.85MJ/m^3$, 46.57% and $0.519m^3/kg$.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.149-154
• /
• 2018

To improve the efficiency and lifetime of filters, we analyze the element distribution at the entrance and exit by using the flow inside a filter, confirming that the internal structure affects the filter efficiency. The flow in the pipe is predicted through computer simulations, and the filtration efficiency of each element is compared through experiments. The efficiency and lifetime of the filter are indirectly improved through the element distribution at the filter outlet according to the internal structure. Because pressure loss from the structure inevitably occurs, the efficiency and lifetime of filters against pressure loss must be considered.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.87-98
• /
• 2024

본 연구는 리그노셀룰로오스 섬유와 굴참나무 수피-기반 활성탄(COA)으로 제조한 3층 섬유판에 한지를 조합하여 제작한 섬유판 필터세트의 미세먼지(PM), 휘발성 유기화합물(TVOC), 폼알데하이드(HCHO) 여과능을 조사하기 위하여 수행하였다. 단백질계 접착제를 적용하여 표층에 목섬유 그리고 심층에 재생섬유/COA로 제조한 섬유판(WRF)과 한지로 제작한 섬유판 필터세트는 일반향의 연소에 의하여 발생하는 상기 오염물질을 효과적으로 여과하였다. 섬유판 제조에 있어 표층/심층에 적용되는 접착제의 함지율을 4%/4%, 5%/3%, 6%/2%로 조절하여 WRF를 제조한 후, 이를 한지와 함께 WRF-기반 필터세트 제작에 이용하였다. 이 필터세트의 PM, TVOC, HCHO 여과능은 심층의 함지율이 감소함에 따라 향상되었다. 한편 WRF-기반 필터세트 구성에 있어 45 g/m² 평량의 한지보다 25 g/m² 평량의 한지(KP-25g)를 사용하여 제작한 필터세트에서 여과능이 우수하였다. 표층에 재생섬유와 심층에 목섬유/COA로 제조한 섬유판(RWF)과 KP-25g로 구성한 섬유판 필터세트의 여과능은 WRF와 비교하여 높았다. 소형 실내공간 및 대형 옥외공간에 WRF-기반 섬유판 필터세트 및 무필터 조건과 함께 측정한 PM 및 TVOC 여과능은 RWF-기반 섬유판 필터세트에서 높았다. 따라서 RWF와 KP-25g를 조합하여 제작한 섬유판 필터세트가 실내외 공간에 존재하는 PM, TVOC 여과용 필터로서 적용이 가능할 것으로 생각한다.

• 환경위생공학
• /
• 제15권3호
• /
• pp.31-36
• /
• 2000

Conventional membrane systems was difficults to treatment for the swine waste water. Technological advances in membrane filtration systems have created opportunity for the swine wastewater to treat effluent streams in order to meet stricter environmental constraints. "Vibratory Shear Enhanced Processing(VSEP)" developed by new logic international makes it possible to filter effluent streams without the fouling problem exhibited by conventional membrane systems. Various kinds of waste water occurred to and swine wastewater experiment with "VSEP" set up conventional reverse osmosis membrane (ACM-4, ESPA, BW-30). The results were as followes : Treatment efficiency for the input COD(From $332mg/{\ell}$ to $4,968mg/{\ell}$) was 98%. Treatment efficiency for the input SS(From $140mg/{\ell}$ to $4,040mg/{\ell}$) was 100%(All together). Treatment efficiency for the input T-N(From $155mg/{\ell}$ to $934mg/{\ell}$) was 97%~99.8%. Treatment efficiency for the input T-P(From $28.6mg/{\ell}$ to $132mg/{\ell}$) was 99.7% and up. ESPA membrane excels three types of reverse osmosis membranes applied VSEP in removal efficiency.

• 한국환경과학회지
• /
• 제27권2호
• /
• pp.99-107
• /
• 2018

In order to design the improvement process for T-N removal, the treatment process of Suyoung, Gangbyeon, and Noxan sewage treatment plants (STP) in Busan was anlayzed. Suyoung STP shows a T-N removal efficiency of about 69.8% with MLE(Modified Ludzack ettinger) and A2O+MBR. However, it is necessary to improve the process to maintain over DO of 1 mg/L and is required to install a flow control tank to minimize the rainfall effect. Gangbyun STP shows a about 70.2% T-N removal efficiency with A2O+GFF(gravity fiber filtration). However, in order to improve T-N removal efficiency, it is needed to install MLE process to treat recycle water. Noksan STP shows a T-N removal efficiency of about 71.0% with MLE+Chemical treatment and shows stable T-N concentration in effluent. However, it is required a toxic chemical management process because bad wastewater flows into the STP, also is necessary a process improvement in order to increase internal recycling ratio. Especially, it is required a process improvement to increase HRT of nitrification tank because Suyoung and Gangbyeon STPs shows low nitrification efficiency during winter season.

• 대한환경공학회지
• /
• 제39권12호
• /
• pp.664-671
• /
• 2017

비점오염원은 도시, 도로, 농지, 산지, 공사장 등 불특정장소에서 불특정하게 수계에 오염물질을 배출하는 배출원으로, 오염물질의 유출경로가 명확하게 구분되지 않는다. 또한 수집이 어렵고 배출량이 강수량 등 기상조건에 크게 좌우되기 때문에 저감시설의 설계 및 유지관리가 어려운 측면이 있다. 한국의 경우 2006년 이후 비점오염원 처리에 대한 중요성이 심화되어 설치의무는 강화되고 있으나, 설치기준 및 효율에 대한 명확한 기준이 제시되지 못하여 단순히 저렴하며 유지관리가 필요치 않은 처리기술을 선호하고 있는 실정이었다. 본 연구는 발포고분자여재(Expended Polypropylene Media, EPP)를 이용한 여과형 비점오염원 저감시설에 대하여 처리능과 역세척에 의한 처리능의 유지에 대한 연구를 진행하였다. 여재층 높이가 증가할수록 처리효율의 변화폭은 줄었으며, 처리효율은 상승하는 것으로 나타났다. 60 cm의 여재층 높이에서 10 m/hr의 선속도의 경우 평균 처리효율은 94%로 나타났으며, 20 m/hr의 선속도의 경우 평균 처리효율이 90%로 나타났다. 여과 선속도 10 m/hr와 20 m/hr에서 180분 동안 운전 결과, 손실수두의 변화는 여재층 높이에 따른 차이가 조금 다른 양상으로 나타났다. 총 3회 반복한 역세척 실험 동안 여과시간이 경과함에 따라 처리효율은 여재가 폐색됨에 따라 감소하는 경향을 나타났다. 그러나 역세척 과정 이후에는 이전 여과과정의 초기 시점의 처리효율과 거의 유사하게 회복하는 것으로 확인하였다.