• 한국엔터테인먼트산업학회논문지
• /
• 제14권6호
• /
• pp.43-52
• /
• 2020

본 논문은 구스타프 도이치(Gustav Deutsch) 감독의 영화 <셜리에 관한 모든 것>(2013)에 대한 연구이다. 이 영화는 화가 에드워드 호퍼(Edward Hopper)의 회화를 오마주 해 영화로 변환하였는데. 회화 작품을 있는 그대로 활용하면서 움직임을 가미였기 때문에 마치 그림이 움직이는 것 같은 효과를 준다. 그런 점에서 영화와 회화간의 재매개라는 문제를 제기하고 있다. 본 연구에서는 <셜리에 관한 모든 것>이 호퍼의 그림을 영화로 전환함에 있어 어떤 방식으로 움직임을 다루었는가를 배우의 움직임과 화면의 움직임이라는 두 측면에서 살펴본다. 조르조 아감벤의 몸짓(gesture) 개념이 이 과정에서 분석의 틀로 사용되었다. 이 영화에서 배우의 움직임은 사건을 만들고 전개하는 일반적인 액팅(action)이라기보다는 인물의 동작과 표정 그 자체를 드러내는 몸짓이다. 스토리를 목적으로 하는 연기가 아닌 조르조 아감벤이 영화의 가능성으로 말했던 물화된 이미지를 해방하는 몸짓인 것이다. 편집과 카메라 움직임은 정면성을 유지한 채 사용된다. 이는 화면의 움직임이 관객 시선임을 말해주며 언뜻 보기엔 원작의 관음증적 시선을 구현하고 있다. 하지만 관객은 주류 허구 영화에서와 같이 이미지 대상을 일방적으로 보는 것이 아니라 자신 또한 보여지고 있다. 또한 화면의 디테일을 자세히 보려는 카메라 움직임은 세부를 드러내는 수단이라기보다는 움직임 그 자체를 보여주고 있다. 영화의 현실감은 움직임을 통해서 만들어진다. 이영화는 회화와 영화 사이에서, 말과 이미지 사이에서 현실의 비전을 질문하고 있다. 움직임은 현실을 매개하는 수단이지만, 이 영화는 그 매개성을 드러냄으로써 아감벤이 말했던 잃어버린 몸짓을 다시 되찾고 있다. 이는 현실의 비전이 그러한 매개성을 가렸을 때 출현함을 말해준다.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.95-100
• /
• 1982

Instead of barium carbonate, domestic barite was used as the flux in manufacturing theinsulating porcelain. To avoid the problems arising from the decomposition of barite in the body during firing, BaO.$Al_2O_3$ was synthesized at $1300^{\circ}C$ for 5 hours. synthetic BaO.$Al_2O_3$ was mixed with other materials such as kaoline, alumina, clay, dolomite. The RO content (CaO. MgO. BaO) of the batches was varied from range of 4 to 14wt. % at 2wt. % - intervals, and firing temperature was varied from 1280 to 140$0^{\circ}C$-at 4$0^{\circ}C$ intervals The properties such as water absorption, bulk density. mechnical strength, specific resistance, and linear shrinkage were measured. The body containing 12 wt.% of RO content showed the satisfactory for the application in the Fixed Carbon Film Resistor.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.193-200
• /
• 2003

In the production of internal combustion engines, there has been a move towards the development of high performance engines with improved fuel efficiency, lighter weight and smaller sizes. These trends help to answer problems in engines related to thermal load and abnormal combustion. In order to investigate these problems, a thin film-type probe for instantaneously measuring temperatures has been suggested. A method for manufacturing such a probe was established in this study. The instantaneous surface temperature of a constant volume combustion chamber was measured by this probe and the heat flux was obtained through Fourier analysis. In order to thoroughly understand the characteristics of combustion, the authors measured the wall temperature of the combustion chamber and computed heat flux through a cylinder wall while varying the protrusion height of the probe. For achieving the above goals, a instantaneous temperature probe was developed, thereby making possible the analysis of the instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2004년도 춘계학술대회
• /
• pp.83-94
• /
• 2004

The purpose of this paper is to let people know that current digital transition in digital cinema industry world wide is inevitable and radical. The parties concerned in the domestic film industry have not paid attention to this digital wave yet, In this research, we investigated about current situation of digital cinema industry and proposed digital film mastering, transport, technology, and business related models in digital cinema. To increase productivity of making a movie, we searched areas needing standards, created quality managing program, and proposed organization systems to perform those plans.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 2부
• /
• pp.645-650
• /
• 2008

엔터테인먼트 산업의 OSMU의 중심에 있는 영화와 게임, 두 매체간의 소재와 스토리의 공유가 활발히 이루어지고 있으나 성공적인 사례는 극히 일부분에 불과한 것이 현실이다. 영화의 게임화, 게임의 영화화에 있어 성공적 스토리텔링을 좌우하는 중심 요소는 바로 Story Value라 할 수 있을 것이다. 본 논문에서는 영화의 게임화와 게임의 영화화의 두 가지 경우에서의 Story Value의 비교 분석을 통해 두 매체 사이의 호환성 있는 스토리텔링 및 캐릭터 설정 방식을 제시해보고자 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.605-608
• /
• 2006

The recent application of wide band gap oxide semiconductors to transparent thin film transistors (TTFTs) is making a fast and growing (r)evolution on the contemporary solid-state electronics. In this paper we present some of the recent results we have obtained using wide band gap oxide semiconductors, like indium zinc oxide, produced by rf sputtering at room temperature. The devices work in the enhancement mode and exhibit excellent saturation drain currents. On-off ratios above $10^6$ are achieved. The optical transmittance data in the visible range reveals average transmittance higher than 80 %, including the glass substrate. Channel mobilities are also quite respectable, with some devices presenting values around $25\;cm^2/Vs$, even without any annealing or other post deposition improvement processes. The high performances presented by these TTFTs associated to a high electron mobility, at least two orders of magnitude higher than that of conventional amorphous silicon TFTs and a low threshold voltage, opens new doors for applications in flexible, wearable, disposable portable electronics as well as battery-powered applications.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.82-86
• /
• 2006

Film has been used widely since Auguste and Louis Lumiere hold the first private screening in 1895. Star Wars Episode II: Attack of the Clones directed by George Lucas released on May 16, was the first motion picture both to be shot completely on a high definition digital 24-frame system and to be projected by digital projectors. Its success showed us that the digital cinema era is imminent. Digital Cinema will enable the studios and movie distributors to low the expenses of making and delivering film prints and dissemination of it can put the entire digital cinema ecosystem in great jeopardy. Therefore DRM and other security policies are used for digital cinema content protection. In this paper it will be discussed how the digital cinema platform can package (encooe & encrypt), transport, and project the digital cinema contents safely.

• 멤브레인
• /
• 제4권1호
• /
• pp.46-56
• /
• 1994

새로운 복합막의 제조를 위하여 기존의 복합막에서 지지막으로 주로 사용되던 Polysulfone을 이보다 친수성이 뛰어난 Polyethersulfone막으로 대체하여 지지막을 직접 제조하고 이에 따른 복합막의 성능을 살펴 보았으며 이때 각 단계별로 제조막의 성능을 평가하여 각 단계별 최적 조건을 찾고자 하였다. 지지막은 Polythersulfone과 Polyvinylpyrrolidone의 조성에 따라 각각 실험하였으며, 활성층은 계면중합법에 의하여 m-Phenylene diamine과 Trimesoyl chloride를 반응시켜 제조하였다.

• 반도체디스플레이기술학회지
• /
• 제19권2호
• /
• pp.16-21
• /
• 2020

How accurately reproducible energy is delivered to the wafer in the process of making thin films using PE-CVD (Plasma enhanced chemical vapor deposition) during the semiconductor process. This is the most important technique, and most of the reaction on the wafer surface is made by thermal energy. In this study, we studied the method of monitoring the change of thermal energy transferred to the wafer surface by monitoring the temperature change according to the change of the thin film formed on the showerhead facing the wafer. Through this research, we could confirm the monitoring of wafer thin-film which is changed due to abnormal operation and accumulation of equipment, and we can expect improvement of semiconductor quality and yield through process reproducibility and equipment status by real-time monitoring of problem of deposition process equipment performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.288-291
• /
• 2001

It is very important to select suspension solution for forming electrophoretic deposited YBCO thick film, because it is heavily affected to its superconducting properties. In this paper, high-temperature superconductor films of YBa$_2$Cu$_3$$O_{7-x}$ were fabricated by electrophoretic deposition (EPD) from alcohol-based suspension such as iso-propanol, iso-butanol, and their mixture. For the formation of YBCO dense and adherent coating on a silver wire by EPD, 1% PEG(1000) 2 $m\ell$, as a additive for making their surface crack-free, was used for electrophoresis. As a results, the cracks were considerably decreased and the superconducting critical current density (J$_{c}$) without/with PEG was 1200 A/$\textrm{cm}^2$ and 2020 A/$\textrm{cm}^2$, which films deposited in mix ism-propanol and iso-butanol suspension.ion.