• Food Science and Preservation
• /
• v.5 no.2
• /
• pp.138-143
• /
• 1998

The stowage effects of Satsuma mandarin(Citrus unshiu Marc. var. miyagawa) were investigated by selecting various pretreatmnents; non-tested, wax-coating, paper packaging, 0.02mm cryovac film packaging. Weight loss of film packaging was the lowest among that of others, but decay radio was increased highly at late stages of storage. Soluble solids, moisture content of peel and total sugar were maintained almost constant, but acid content, vitamin C and firmness were reduced gradually during storage at room temperature. For 100 days storage, losses from weight and decay of ton-treated, paper packaging, wax-coating and film packaging were 15.9%, 18.5%, 17.4% and 12.9%, respectively. Acid content was decreased loom 1.28% to 0.81∼0.91% after 100 days storage. Ethylene evolution was increased in a degree after 65 days storage, and the amount was increased repidly afer 115 days. it seemed to be derived from decayed fruits and physiological activities. CO2 content of inner part of fruits was increased between 40∼100 days after storage. Optimum storage period of early variety of Satuma mandarin was regarded for 100days on the basis of appeareance and taste.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.3
• /
• pp.148-150
• /
• 2017

For the improvement of the anti-fouling features of porcelain electrical insulators, in this study, the surface of an insulator was coated with a functional material to expand the insulator's self-cleanness. The anti-fouling and mechanical features of the functional film coating of ceramic substrates made from components like an electrical insulator were analyzed. The coating methods that were used were spray coating, dip coating, and fabric coating. Following the coating, the contact angle of the coated surface was measured, revealing that the spray coating method offered the lowest angle ($13.7^{\circ}$) and a strong hydrophilic feature. The anti-fouling analysis showed that the anti-fouling features improved as the contact angle decreased. The mechanical properties - hardness and adhesion - were both excellent at 9H and 5B, respectively, regardless of the coating method that was used.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1344-1347
• /
• 2004

Recently, Study on measuring property of a micro thin film(nm ～ hundreds of ) under Thermal Mechanical loading. In this work, We perform tensile test at high temperature(1200 ) to investigate mechanical properties of alumina TGO formed under Thermal Barrier Coating. We used Digital Image Correlation method for measuring displacement, and We presented a method of tensile test for thin film at high temperature.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.1
• /
• pp.33-36
• /
• 2018

The purpose of this study is to improve the efficiency of anti-pollution film for PV module. The anti-pollution coating process was performed on a glass substrate, which is the same material as the glass substrate for the PV module. We coated the anti-pollution film on the glass substrate by spray coating. After coating process, annealing process was performed during 1 hour at $200^{\circ}C$, $300^{\circ}C$, and $400^{\circ}C$. And then we analyzed the surface characteristics according to the annealing temperature of the film. Annealing process can also improve the durability of the coated film. And then we analyzed the anti-pollution characteristics, particle size of anti-pollution film, light transmittance. The particle size of anti-pollution film was analyzed with FE-SEM. The light transmittance was analyzed with UV-Visible spectroscopy including integrating sphere.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.64-69
• /
• 1984

We found that the maximum efficiency of Al-MIS (p-Si) solar ceil was shown at 80$\AA$ thickness of Al-film which was deposited with slower velocity than 0.6$\AA$/sec. It was coated with ZnS and SiO for Anti-Reflecting. In single coating, ZnS and SiO film had maximum Isc at 570 and 690 A thickness, respectively. We confirmed that these results agreed well with the quarter coating condition; n1d1=λ/4. In double coating, we held the one layer with its optimum thickness in single coating and controlled the other layer. The maximum value of Isc in this case was almost the same with it in single coating but was maintained its value in so wide range of thickness. Keeping the relation; n1d1=n2d2 as another way, we made the total thickness of film thinner to 70-90% of the sum of each optimum thickness in single coating. In this case Isc was higher value than 20% of it in any other previous case and was retained so wide range of thickness.

• Journal of Adhesion and Interface
• /
• v.13 no.1
• /
• pp.31-37
• /
• 2012

In this study, we investigated the curing properties of UV-LED curable color coating. Specially, the effects of UV-LED wavelength (365, 395, and 405 nm), inert gas, the concentration of photosensitizer, and dual curing on the curing behavior of UV-LED coating systems were studied. The photopolymerization behaviors and the unreacted acrylate groups at Film-air (FA) interface and Film-substrate (FS) interface were investigated by photo differential scanning calorimetry (Photo-DSC) and Fourier-transform infrared spectroscopy with attenuated total reflection (FT-IR/ATR), respectively. Photo-DSC results showed that the heat flow and the ultimate conversion for coating system cured by 405 nm UV-LED were higher than the corresponding values for coating systems cured by 395 and 365 nm UV-LED. FT-IR/ATR results showed that the UV-LED curing systems improved interior and through curing of the coating film, but significantly are affected by oxygen inhibition at FA-interface. The inert environment such as nitrogen purging and the dual curing improved the surface and interior curing of the coating films.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.264-269
• /
• 2000

TiO$_2$thin films were prepared on the glass by a conventional spin coating method with $TiO_2$ sol(30wt%, anatase). The thickness of the thin films were controlled by the number of coating cycles: one cycle is composed of spin coating, drying, and heating process. The reaction rate of the film was obtained by the photodecomposition of gaseous benzene under 0.44 and 2.0mW/$\textrm{cm}^2$ UV light on the film surface. For an incident UV light intensity of 0.44mW/$\textrm{cm}^2$, the reaction rate was increased with the thickness of the film, caused by extent of surface area, but there was no change over the thickness of about 4$\mu\textrm{m}$. The porous $TiO_2$ thin film has comparatively vast effective surface area, which under relatively high-intensity UV illumination causes the reaction rate to be controlled by the film thickness.

• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.733-739
• /
• 2007

NiO-YSZ anode-supported single cell was prepared by spin-coating YSZ and LSM slurries as electrolyte and cathode, respectively. Dense YSZ electrolyte film was successfully prepared on the porous NiO-YSZ anode substrate by tuning pre-sintering temperature of NiO-YSZ and co-firing temperature. The thickness of YSZ film was controlled by the solid content of slurry and coating cycles. The experimental conditions affecting on the thickness of YSZ film was discussed. Single cells with the active electrode area ${\sim}0.8\;cm^2$ were prepared by spin-coating the cathode layers of LSM-YSZ mixture and LSM consequently as well. The effects of the pre-sintering temperature and thus the microstructure of NiO-YSZ substrate on the current-voltage characteristics of co-fired cell were investigated.

• Laser Solutions
• /
• v.13 no.1
• /
• pp.11-15
• /
• 2010

Indium tin oxide (ITO) provides high electrical conductivity and transparency in the visible and near IR (infrared) wavelengths. Thus, it is widely used as a transparent electrode for the fabrication of liquid crystal displays (LCDs) and organic light emitting diode displays (OLRDs), photovoltaic devices, and other optical applications. Lasers have been used for removing coating on polymer substrate for flexible display and electronic industry. In selective removal of ITO layer, laser wavelength, pulse energy, scan speed, and the repetition rate of pulses determine conditions, which are efficient for removal of ITO coating without affecting properties of the polymer substrate. ITO coating removal with a laser is more environmentally friendly than other conventional etching methods. In this paper, pattering of ITO film from polymer substrates is described. The Yb:KGW femtosecond laser processing system with a pulse duration of 250fs, a wavelength of 1030nm and a repetition rate of 100kHz was used for removing ITO coating in air. We can remove the ITO coating using a scanner system with various pulse energies and scan speeds. We observed that the amount of debris is minimal through an optical and a confocal microscope, and femtosecond laser pulses with 1030nm wavelength are effective to remove ITO coating without the polymer substrate ablation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.79-83
• /
• 2018

An accurate method to measure shielding effectiveness(SE) of EMI spray coating film is presented. After high frequency simulating, Circular coaxial standard test fixture is fabricated. A sample of EMI spray coating film was fabricated for insertion into a circular coaxial standard test fixture. The measuring instrument used an Agilent 8722ES vector network analyzer for the SE measurement. The exact SE of copper and silver mixed spray coating sample was measured by the composition of the measuring instrument and the measuring sample. The SE of copper sample was measured at 70 dB and the SE of copper and silver mixed spray coating sample was measured at 60 dB. As a result of the measurement, the reliability of the circular coaxial standard test fixture was confirmed.