Browse > Article
http://dx.doi.org/10.4191/KCERS.2007.44.1.733

Anode-supported Solid Oxide Fuel Cells Prepared by Spin-coating  

Yu, Ji-Haeng (Convergence Energy Materials Research Center, Korea Institute of Energy Research)
Lee, Hee-Lak (Convergence Energy Materials Research Center, Korea Institute of Energy Research)
Woo, Sang-Kuk (Convergence Energy Materials Research Center, Korea Institute of Energy Research)
Publication Information
Journal of the Korean Ceramic Society / v.44, no.12, 2007 , pp. 733-739 More about this Journal
Abstract
NiO-YSZ anode-supported single cell was prepared by spin-coating YSZ and LSM slurries as electrolyte and cathode, respectively. Dense YSZ electrolyte film was successfully prepared on the porous NiO-YSZ anode substrate by tuning pre-sintering temperature of NiO-YSZ and co-firing temperature. The thickness of YSZ film was controlled by the solid content of slurry and coating cycles. The experimental conditions affecting on the thickness of YSZ film was discussed. Single cells with the active electrode area ${\sim}0.8\;cm^2$ were prepared by spin-coating the cathode layers of LSM-YSZ mixture and LSM consequently as well. The effects of the pre-sintering temperature and thus the microstructure of NiO-YSZ substrate on the current-voltage characteristics of co-fired cell were investigated.
Keywords
SOFC; Fabrication; Slurry; Spin-coating; Cell performance;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 J. Wang, Z. Lu, K. Chen, X. Huang, N. Ai, J. Hu, Y. Zhang, and W. Su, 'Study of Slurry Spin Coating Technique Parameters for the Fabrication of Anode-supported YSZ Films for SOFCs,' J. Power Sources, 164 17-23 (2007)   DOI   ScienceOn
2 J. H. Yu, G. W. Park, S. Lee, and S. K. Woo, 'Micro-Structural Effects on the Electrical and Mechanical Properties of Ni-YSZ Cermet for SOFC Anode,' J. Power Sources, 163 926-32 (2007)   DOI   ScienceOn
3 S.-G. Kim, S. P. Yoon, S. W. Nam, S.-H. Hyun, and S.-A. Hong, 'Fabrication and Characterization of a YSZ/YDC Composite Electrolyte by a Sol-gel Coating Method,' J. Power Sources, 110 222 (2002)   DOI   ScienceOn
4 X. Xu, C. Xia, S. Huang, and D. Peng, 'YSZ thin Films Deposited by Spin-coating for IT-SOFCs,' Ceramics International, 31 1061-64 (2005)   DOI   ScienceOn
5 J. Wang, Z. L, X. Huang, K. Chen, N. Ai, J. Hu, and W. Su, 'YSZ Films Fabricated by a Spin Smoothing Technique and Its Application in Solid Oxide Fuel Cell,' J. Power Sources, 163 957-59 (2007)   DOI   ScienceOn
6 A. F. M. Leenaards and A. Burggraaf, 'The Preparation and Characterization of Alumina Membranes with Ultrafine pores,' J. Colloid Interface Sci., 105 27-40 (1985)   DOI   ScienceOn
7 K. Chen, Z. L, N. Ai, X. Huang, Y. Zhang, X. Ge, X. Xin, X. Chen, and W. Su, 'Fabrication and Performance of Anode-supported YSZ Films by Slurry Spin Coating,' Solid State Ionics, 177 3455-60 (2007)   DOI   ScienceOn
8 M. Asamoto, H. Shirai, H. Yamaura, and H. Yahiro, 'Fabrication of $BaCe_{0.8}Y_{0.2}O_3$ Dense Film on Perovskite-type Oxide Electrode Substrate,' J. Euro. Ceram. Soc., 27 4229-32 (2007)   DOI   ScienceOn
9 J. H. Yu, Y. W. Kim, G. W. Park, D. W. Seo, S. Lee, and S. K. Woo, 'Electrical and Mechanical Characteristics of Ni-YSZ Tubular Support Fabricated by Extrusion(in Korean),' J. Kor. Ceram. Soc., 43 [12] 768-74 (2006)   과학기술학회마을   DOI   ScienceOn
10 D. Jiao and M. M. Sharma, 'Mechanism of Cake Buildup in Crossflow Filtration of Colloidal Suspensions,' J. Colloid Interface Sci., 162 454-62 (1994)   DOI   ScienceOn
11 H. Moon, S. D. Kim, S. H. Hyun, and H. S. Kim, 'Fabrication of Anode-supported SOFC Single Cells Via Tapecasting of thin tapes and Co-firing(in Korean),' J. Kor. Ceram. Soc., 43 [12] 788-97 (2006)   과학기술학회마을   DOI   ScienceOn