• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1311-1316
• /
• 2007

To develop photo-sensitizers for dye-sensitized solar cells (DSCs) used in harvesting sunlight and transferring solar energy into electricity, we synthesize novel Ru(II) polypyridyl dyes and describe their characterization. We also investigate the photo-electrochemical properties of DSCs using these sensitizers. New dyes contain chromophore unit of dafo (4,5-diazafluoren-9-one) or phen-dione (1,10-phenanthroline-5,6-dione) instead of the nonchromophoric donor unit of thiocyanato ligand in cis-[RuII(dcbpy)2(NCS)2] (dcbpy = 4,4'-dicarboxy- 2,2'-bipyridine) coded as N3 dye. For example, the photovoltaic data of DSCs using [RuII(dcbpy)2(dafo)](CN)2 as a sensitizer show 6.85 mA/cm2, 0.70 V, 0.58 and 2.82% in short-circuit current (Jsc ), open-circuit voltage (Voc), fill factor (FF) and power conversion efficiency (Eff), which can be compared with those of 7.90 mA/ cm2, 0.70 V, 0.53 and 3.03% for N3 dye. With the same chelating ligand directly bonded to the Ru metal in the complex, the CN ligand increases the Jsc value by double, compared to the SCN ligand. The extra binding ability in these new dyes makes them more resistant against ligand loss and photo-induced isomerization within octahedral geometry.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.424-428
• /
• 2008

We prepared an ionic gel polymer electrolyte for dye-sensitized solar cells (DSSCs) without leakage problem. Triiodide compound (BTDI) was synthesized by the reaction of benzene tricarbonyl trichloride with diethylene glycol monotosylate and subsequent substitution of tosylate by iodide using NaI. Bisimidazole was prepared by the reaction of imidazole with the triethylene glycol ditosylate under strongly basic condition provided by NaH. BTDI and bisimidazole dissolved in an ionic liquid were injected into the cells and permeated into the $TiO_2$ nanopores. In situ crosslinking was then carried out by heating to form a network structure of poly(imidazolium iodide), thereby converting the ionic liquid electrolytes to a gel or a quasi-solid state. A monomer (BTDI and bisimidazole) concentration in the electrolytes of as low as 30 wt% was sufficient to form a stable gel type electrolyte. The DSSCs based on the gel polymer electrolytes showed a power conversion efficiency of as high as 1.15% with a short circuit current density of $5.69\;mAcm^{-2}$, an open circuit voltage of 0.525 V, and a fill factor of 0.43.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.192-192
• /
• 2013

본 연구에서는 RF/DC 마그네트론 스퍼터링 시스템을 이용하여co-sputtering 방법으로 성장시킨 고이동도를 갖는Ge-doped $In_2O_3$In2O3 (IGO) 박막의 전기적, 광학적, 구조적 특성을 평가하고, 이를 유기태양전지와 유기발광다이오드에 적용함으로써 고이동도 IGO 투명전극의 소자 적용가능성을 타진하였다. GeO2 타겟에 인가되는 도핑 Power와 급속열처리 온도가 30 W, $500^{\circ}C$일 때, 최적화 된 IGO 박막으로부터 $2.8{\times}10^{-4}$ Ohm-cm의 낮은 비저항과 86.9% (550 nm)의 높은 투과도를 확보하였다. 뿐만 아니라 Near Infra-red (750~1,200 nm) 영역에서의 IGO투명전극의 광투과율이 결정질의 ITO보다 높은(약15%) 투과도를 보이는 것을 통해 IGO박막의 높은 LAS (Lewis Acid Strength) 값을 가지는 Ge 원소의 도핑이 NIR 영역의 광투과율 향상에 미치는 영향을 확인할 수 있었다. 최적 조건의 IGO 박막을 적용하여 Fill Factor 67.38%, Short circuit current density 8.43 mA/cm2, open circuit voltage 0.60 V, efficiency 3.44%의 유기태양전지 및 19.24%의 외부양자효율을 갖는 유기발광다이오드를 제작함으로써 결정질 ITO 전극(20.05%)을 대체할 수 있는 고투과, 고이동도 IGO 투명 전극 및 이를 이용한 광전소자 적용 가능성을 타진하였다.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.802-809
• /
• 2001

Electroplating is an attractive alternative deposition method for copper with the need for a conformal and conductive seed layer In addition, the Cu seed layer should be highly pure so as not to compromise the effective resistivity of the filled copper interconnect structure. This seed layer requires low electrical resistivity, low levels of impurities, smooth interface, good adhesion to the barrier metal and low thickness concurrent with coherence for ensuring void-free fill. The electrical conductivity of the surface plays an important role in formation of initial Cu nuclei, Cu nucleation is much easier on the substrate with higher electrical conductivities. It is also known that the nucleation processes of Cu are very sensitive to surface condition. In this study, copper seed layers deposited by magnetron sputtering onto a tantalum nitride barrier layer were used for electroplating copper in the forward pulsed mode. Prior to electroplating a copper film, the Cu seed layer was cleaned by plasma H$_2$ and $N_2$. In the plasma treatment exposure tome was varied from 1 to 20 min and plasma power from 20 to 140W. Effects of plasma pretreatment to Cu seed/Tantalum nitride (TaN)/borophosphosilicate glass (BPSG) samples on electroplating of copper (Cu) films were investigated.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.107-115
• /
• 2015

The objective of the this study is to find the breakage index and changes in permeability of Bottom ash from thermoelectric power plants in Korea. Bottom ash was crushed by compaction according to compaction energy from 0 to $1661.4\;kN/m^2$. The particle size distribution was estimated by sieve analysis. The various breakage indexes were used for analyzing the change in particle size distribution and effect of compaction energy. In the result, breakage indexes were increased as compaction energy and initial upper 4.75 mm diameter ratio, but values and tendencies of breakage indexes appeared in different as calculation method of breakage indexes. The coefficient of permeability was decreased with particle breakage, but decreasing ratio of permeability was very small. Bottom ash has a higher permeability than the weathered soil and it is considered high usability as a permeable materials.

• Fisheries and Aquatic Sciences
• /
• 제21권3호
• /
• pp.12.1-12.15
• /
• 2018

A preliminary investigation of length-weight relationship, condition factor and reproductive ecology of African pike fish, Hepsetus odoe, was conducted between June to August 2010 in Lake Eleiyele. A total of 90 samples of the fish species were caught by fishermen using gill nets. The results obtained showed that fish species had isometric growth pattern (contrary to negative allometry expected) with the growth exponent, b value of 2.64, that is not statistically different from 3 and with high statistical power of 0.866 when tested. The mean condition factor, K, was found to be 2.6, indicating that the fish species were in good condition in the study area. For reproductive biology, mean fecundity and gonadosomatic index were found to be 1349 eggs and 3.53% respectively. This study was necessary to fill the knowledge gap and provide information for management and conservation of the investigated species in the lake system. This study recommended that further research needs to be conducted because the sampling was carried out in the rainy season period and within a quarter of a year.

• 한국CDE학회논문집
• /
• 제14권6호
• /
• pp.415-423
• /
• 2009

Because of the fast changing car design and increasing facilities, manufacturing process of cars is getting more complex now a days. Particularly, car manufacturing system that consist of automated devices, applies various simulation techniques to validate device motion and detect collision. To cope with this problem, traditional manufacturing system deployed test-run with the real devices. However, increased computing power in a contemporary manufacturing system changes it into realistic 3D simulation environment. Similarly, managed device data that was generated using 2D traditionally, can be converted to 3D realistic simulation. The existing problem with 3D simulation is disjoint data interaction between different work stations. Consequently, JIGs, fixing the car part accurately, are changed according to fixing position on the part or a part shape properties. In practice, the 3D JIG data has to be managed according to kinematic information, but not of its features. However, generating kinematic information to the 3D model repeatedly according to frequent change in part is not explained in current literatures. To fill this knowledge gap, this paper suggests an improving method of rendering 3D JIG kinematics information to simulation model. Thereafter, it shows the result of implementation.

• ETRI Journal
• /
• 제35권4호
• /
• pp.587-593
• /
• 2013

We demonstrate semitransparent organic photovoltaics (OPVs) based on thin metal electrodes and polymer photoactive layers consisting of poly(3-hexylthiophene) and [6,6]-phenyl $C_{61}$ butyric acid methyl ester. The power conversion efficiency of a semitransparent OPV device comprising a 15-nm silver (Ag) rear electrode is 1.98% under AM 1.5-G illumination through the indium-tin-oxide side of the front anode at 100 $mW/cm^2$ with 15.6% average transmittance of the entire cell in the visible wavelength range. As its thickness increases, a thin Ag electrode mainly influences the enhancement of the short circuit current density and fill factor. Its relatively low absorption intensity makes a Ag thin film a viable option for semitransparent electrodes compatible with organic layers.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.211-223
• /
• 2007

21 Century is said the age of cultural industry. In this cultural Industry one of very important factors which guides this times is the exploitation of cultural goods, which is based on regional identity. Therefore, at this point of time when its weighty has been raised, the aim of this study is to fill the image Korean tradition and modernity culture in them, through the search on their characteristics among regions and nations, desk the cultural service goods which gets survival power of traditional and cultural identity. Nine existing Hahoe masks are changed into nine new cultural items, which are presented the nine dreams of Hahoe masks. As consumer's choice is diversified by a set of products, main concept in this study is the focus on modernity, rationality, traditionality and popularity. The main concept of this study is on rational functions and convenience, the harmony of tradition and modernity. As said above, in the process of manufacture the mass production of goods is stressed, and by getting the composition and making a set of goods, the choice of consumers will be extended. Getting ideal globalization by the coexistence of tradition and modernity on goods, is very important. Consequently, cultural goods must be recognized as a factor of its medium, and also, on domestic cultural goods people's interest must be risen all the more.

• 한국전기전자재료학회논문지
• /
• 제26권3호
• /
• pp.252-256
• /
• 2013

We introduced sensitizing dyes into the bulk-heterojunction (BHJ) photovoltaic (PV) layer of polymer solar cells (PSCs). The sensitizing dyes doped were Bis(tetra butyl ammonium) cis-dithio cyanato bis(2,2'-bipyridine-4-carboxylicacid-4'-carboxylate) ruthenium (II) (N719 dye) and the BHJ PV layer used was made of poly (3-hexylthiophene) (P3HT) and phenyl $C_{61}$-butyric acid methyl ester (PCBM). It was found that the N719 dyes increase the photovoltaic performance, i.e., increasing open-circuit voltage and short-circuit current density with improved fill factor. For the P3HT:PCBM PV cells doped with the N719 dyes (0.24 wt%), an increase in power conversion efficiency of 4.0% was achieved, compared to that of the control cells (3.6%) without the N719 dyes.