• 한국지반공학회지:지반
• /
• 제11권3호
• /
• pp.5-16
• /
• 1995

본 연구에서는 석탄회를 성토재로 활용시 침출 시간경과에 따른 석탄회 침출수의 성분 및 농도변화 특성을 파악하므로써 주변환경에 미치는 영향을 평가하기 위해 비회 및 혼합회를 대상으 로한 연속식 용출시험과 회분식 용출시 험을 수행하고 시험 결과를 수질기준과 비교, 검토하였다. 시험결과, 대상 석탄회는 일반 폐기물로 분류되었으며,석탄회 침출수의 농도는 시간경과에 따라 급격히 감소하여 일정시간 경과후에는 극히 미미하게 나타났다. 또한 대상석탄회 침출수의 수질은 pH를 제외한 기타 성분들이 모두 음용수 수질기준과 폐수배출 허용기준을 만족하는 것으로 나타났다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.134-138
• /
• 2016

The fullerene solar cells are becoming a feasible choice due to the advanced developments in donor materials and improved fabrication techniques of devices. Recently, sufficient optimization and improvements in the processing techniques like incorporation of solvent vapor annealing (SVA) with additives in solvents has become a major cause of prominent improvements in the performance of organic solar cell-based devices . On the other hand, the challenge of reduced open circuit voltage (V_oc) remains. This study presents an approach for significant performance improvement of overall device based on organic small molecular solar cells (SMSCs) by following a two step technique that comprises thermal annealing (TA) and SVA (abbreviated as SVA+TA). In case of exclusive use of SVA, reduction in V_oc can be eliminated in an effective way. The characteristics of charge carriers can be determined by the measurement of transient photo-voltage (TPV) and transient photo-current (TPC) that determines the scope for improvement in the performance of device by two step annealing. The recovery of reduced V_oc is linked with the necessary change in the dynamics of charge that lead to increased overall performance of device. Moreover, SVA and TA complement each other; therefore, two step annealing technique is an appropriate way to simultaneously improve the parameters such as V_oc, fill factor (FF), short circuit current density (J_sc) and PCE of small molecular solar cells.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.69.2-69.2
• /
• 2010

Recently, bulk hetero-junction cells have been extensively studied by many researchers. Most of these cells were fabricated by spin coater. However, the spin coating process is not favorable to the large-scaled industry because it is not compatible with roll-to-roll process. One of the alternative methods is Doctor blading. In this study, we fabricated large OPV cells having total area of $100cm^2$. The buffer layer was Poly-(3,4-ethylenedioxythiophene) : poly-(styrenesulfonate) aqueous dispersion (PEDOT:PSS) and the active material is poly (3-hexythiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) blend in the solvent of Chlorobenzene. All of the organic layers were coated by dragging the blade with a speed of 5~20 mm/s on the stage with a temperature of $50^{\circ}C$. As-bladed PEDOT:PSS layer was baked at $120^{\circ}C$ for 10 minutes to eliminate the water. The cell structure is patterned ITO substrate/PEDOT:PSS/P3HT:PCBM/LiF/Al. The topmost electrode, LiF/Al, was deposited by thermal evaporation. After depositing electrode, and the cell was annealed at $150^{\circ}C$ for 30 minutes. The measured ISC, VOC, fill factor, and PCE were 2.95 A, 5.86 V, 0.32, and 0.78%, respectively. PCE was quite low but the large active area could be obtained successfully.

• Journal of Korean Dental Science
• /
• 제9권2호
• /
• pp.55-62
• /
• 2016

Purpose: Alveolar bone develops with tooth eruption and is absorbed following tooth extraction. Various ridge preservation techniques have sought to prevent ridge atrophy, with no superior technique evident. Collagen has a long history as a biocompatible material. Its usefulness and safety have been amply verified. The related compound, atelocollagen, is also safe and displays reduced antigenicity since telopeptides are not present. Materials and Methods: The current study evaluated whether the $Rapiderm^{(R)}$ atelocollagen plug (Dalim Tissen, Seoul, Korea) improves tissue healing of extraction sockets and assessed the sequential pattern of bone regeneration using histology and microcomputed tomography in six beagle dogs. To assess the change of extraction socket, hard tissues were examined 2, 4, 6, and 8 weeks after tooth extraction. Result: The experimental groups showed better bone fill with slow remodeling process compared to the control groups although there was no statistical difference between groups. Conclusion: The atelocollagen seems to have a tendency to slow bone remodeling in the early phase of healing period and maintain remodeling capacity until late phase of remodeling. Also, use of atelocollagen increased the bone-to-tissue ratio compared to healing of untreated extraction socket.

• Computers and Concrete
• /
• 제21권3호
• /
• pp.311-319
• /
• 2018

This study used a volumetric method for design. The control group used waste Liquid Crystal Displayplay (LCD) glass powder to replace cement (0%, 10%, 20%, 30%), and the PZT group used Pd-Zr-Ti piezoelectric (PZT) powder to replace 5% of the fine aggregate to make cement mortar. The engineering and the mechanical and electricity properties were tested; flow, compressive strength, ultrasonic pulse velocity (UPV), water absorption and resistivity (SSD and OD electricity at 50 V and 100 V) were determined; and the correlations were determined by linear regression. The compressive strength of the control group (29.5-31.8 MPa) was higher than that of the PZT group (25.1-29 MPa) by 2.8-4.4 MPa at the curing age of 28 days. A 20% waste LCD glass powder replacement (31.8 MPa) can fill up finer pores and accelerate hydration. The control group had a higher 50 V-SSD resistivity ($1870-3244{\Omega}.cm$), and the PZT group had a lower resistivity ($1419-3013{\Omega}.cm$), meaning that the resistivity increases with the replacement of waste LCD glass powder. This is because the waste LCD glass powder contains 62% $SiO_2$, which is a low dielectric material that is an insulator. Therefore, the resistivity increases with the $SiO_2$ content.

• Steel and Composite Structures
• /
• 제25권3호
• /
• pp.347-360
• /
• 2017

The goal of this study is to fill this apparent gap in the area about vibration analysis of multiwalled carbon nanotubes (MWCNTs) curved panels by providing 3-D vibration analysis results for functionally graded multiwalled carbon nanotubes (FG-MWCNTs) sandwich structure with power-law distribution of nanotube. The effective material properties of the FG-MWCNT structures are estimated using a modified Halpin-Tsai equation. Modified Halpin-Tsai equation was used to evaluate the Young's modulus of MWCNT/epoxy composite samples by the incorporation of an orientation as well as an exponential shape factor in the equation. The exponential shape factor modifies the Halpin-Tsai equation from expressing a straight line to a nonlinear one in the MWCNTs wt% range considered. Also, the mass density and Poisson's ratio of the MWCNT/phenolic composite are considered based on the rule of mixtures. Parametric studies are carried out to highlight the influence of MWCNT volume fraction in the thickness, different types of CNT distribution, boundary conditions and geometrical parameters on vibrational behavior of FG-MWCNT thick curved panels. Because of using two-dimensional generalized differential quadrature method, the present approach makes possible vibration analysis of cylindrical panels with two opposite axial edges simply supported and arbitrary boundary conditions including Free, Simply supported and Clamped at the curved edges. For an overall comprehension on 3-D vibration analysis of sandwich panel, some mode shape contour plots are reported in this research work.

• 조형예술학연구
• /
• 제6권
• /
• pp.226-248
• /
• 2004

The researcher has tried to develop the aesthetic value of the art and the function of metalwork in conjunction with our daily life. especially has been eager to develop the new possibility of metal urns through the investigation of ordinary metalwork. Funeral urns are vessels to fill the ashes of bodies. As the social issues, including problems of restricted land territory and environmental pollution are awakening, many people are much concerned about the use of urns in recent days. Although social concerns about cremation and urns are getting high, most urns in Korea have been made of ceramic and stone. The shape of old urns are pot style with lids, and their color is simple white or jade green. Moreover, old urns are expensive, unpractical, simple, and furthermore, the feature of urns has not preserved the sense of beauty. In this context, we have narrow choices to select urns, and it has been difficult for us to be familiar with the old-style urns. Therefore, the need for developing metal urns are necessary as the increase of public concerns towards cremation is widely spreading. As it is well known, metal is not only regarded as hard, antibacterial, pro-environmental material , but also regarded as good substance for urns. Metal is also suitable for making urns because of metal's characteristics of easy processing, mass production, and cheap price. The researcher has been tried to find the possibility of art of metalwork through the dissemination of metal urns to the public. The researcher has also attempted to represent the characteristics and symbolic implications of contemporary metal urns for ordinary people to adopt metal urns as their 'Rite Haven'.

• 대한치과의사협회지
• /
• 제54권1호
• /
• pp.27-38
• /
• 2016

Objectives: This study evaluated the outcomes of continuing professional education in implant dentistry using Kirkpatrick's four-level evaluation model. Material and methods: The study was carried out through a questionnaire distributed to dentists who attended a continuing professional education in implant dentistry, 2008~2012. They were asked to fill out questionnaires at least 6 months after its completion. Results: Mean ages of total 23 dentist was $44.8^{\circ}{\ae}8.2$. Mean period after completion of education was $2.7^{\circ}{\ae}1.2$. Knowledge (level 2) (r=0.71, p<0.01) and behavior (level 3) (r=0.68, p<0.01) was positively correlated with topic and methods of education in reaction (level 1). Behavior was positively correlated with knowledge (r=0.79, p<0.01). Result (level 4) was positively correlated with knowledge (r=0.64, p<0.01) and behavior (r=0.86, p<0.01). Conclusion: Reaction affects on knowledge, behavior and result in order.

• 한국환경복원기술학회지
• /
• 제3권1호
• /
• pp.52-61
• /
• 2000

Permeability is important factor in the geotechnical problems, such as seepage discharge and dissipation of excess pore water pressure. The Kozeny-Carman equation works well for graded soils but serious discrepancies are found in clays. Major factor for these discrepancies is the tortuous flow path and unequal pore size. To estimate the permeability of fine grained soils, a permeability equation in which swelling potential is coupled with Kozeny-Carman equation is proposed in this study. To verify proposed equation, a series of variable head permeability test was carried out for steel making slag and sludge mixed with bentonite. The coefficients of permeability which is measured in the laboratory is compared with the values by the proposed equation. From the comparison, it is shown that the proposed equation can predict the coefficient of permeability of clays with satisfaction. As steel making slag and sludge is industry waste, it is reused as material of road foundation and cement but the rate of use is low. It mixed sodium-bentonite with high swelling property and permeability decrease effect. Then, Admixture investigates reuse possibility as liner of waste fill.

• International Journal of Quality Innovation
• /
• 제6권1호
• /
• pp.74-97
• /
• 2005

IDEF0 is the IEEE standard for functional enterprise modeling and has been used for business process modeling or process mapping in US and Europe. But it does not reflect the potential benefits of modeling and simulation of the dynamic aspects of an enterprise or a system. On the other hand, simulation tools concentrate mostly on the simulation of material flows and are difficult to include information flows and control flows. Additionally, the simulation models that include elements such as queues, event generators and process nodes is a visual interactive representation for the model builder, but is inconvenient for the domain expert. In an attempt to fill that void, we provide an integration of business process and simulation models in this paper. An enhancement of the IDEF0, called parameterized IDEF0, is proposed and its conversion mechanism to network simulation model is developed. Using this methodology, business process models for alternative systems can be evaluated and compared through simulation on time, cost, and quality metrics. As an application of the proposed methodology, economic evaluation of EDI (Electronic Data Interchange) for time-based BPR (Business Process Redesign) is demonstrated. In addition to BPR, the developed methodology may be further integrated with ABC (Activity Based Costing), TQM (Total Quality Management), and economic evaluation of information systems.