• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.459-460
• /
• 2006

N-type $Bi_2Te_3-Sb_2Te_3$ solid solutions doped with 1$CdCl_2$ was prepared by melt spinning, crushing and vacuum sintering processes. Microstructure, bending strength and thermoelectric property were investigated as a function of the doping quantity from 0.03wt.% to 0.10wt.% and sintering temperature from $400^{\circ}C$ to $500^{\circ}C$, and finally compared with those of conventionally fabricated alloys. The alloy showed a good structural homogeneity as well as bending strength of $3.88Kgf/mm^2$. The highest thermoelectric figure of merit was obtained by doping 0.03wt.% and sintering at $500^{\circ}C$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.67-68
• /
• 2022

The area inside the apartment building where tiles are installed is applied as a finishing material for walls and floors, including exterior walls, balconies, hallways, bathrooms, and kitchens. As it is constructed in various spaces, differences in the type and period of occurrence of tile defects may appear, which is caused by heterogeneous characteristics between materials and external causes. Therefore, in this study, two-way ANOVA was used to figure out the relationship between the defect occurrence type and the period depending on the type of tile construction in the apartment building.

• Journal of Nutrition and Health
• /
• v.25 no.3
• /
• pp.221-232
• /
• 1992

This study was intended to figure out the interrelationship among body fat distribution serum insulin and lipids levels. One hundred forty four adult female from Chinju area were participated in this study. The survey was conducted between December 17, 1990-February 27, 1991, . The results are as follows : Wiast/hip girth ratio(WHR) and waist/thigh girth ratio(WTR) were increased with age and positively correlated with body mass index(BMI). It appeared that the prevalence of obesity in terms of BMI was higher in upper body type than intermediate or lower body type women. Correlation analyese indicated that serum triglyceride level seemed to be more closely associated with BMI and other body fat distribution indices. Analyses of the anthropometric data serum lipids and insulin were carried out by dividing the sample into three body type groups-upper body type women(WHR$\geq$0, .87) intermediate body type women(0.82$\leq$WHR$\leq$0.86) and low body type women(WHR$\leq$0.81) Age weight BMI RBW percentage of body fat serum insulin triglyceride cholesterol level of upper body type women were significnatly higher than that of intermediate or lower body type women(p<0.05) HDL-cholesterol was significantly lower in upper body type women. These results suggested that body fat distribution would be relevant to chronic metabolic diseases.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.311-326
• /
• 1994

The purpose of this study was to identify 1) the effect of two contexts (job interview, Informal outing) and clothing cues (type, style, color) on male impresssions 2) the effect of perceiver's age on male impressions created by the clothing cues and contexts. The subjects consisted of 256 male undergraduate students and 256 middle-aged men. The experimental materials developed for this study were a set of stimuli and response scales. The stimuli were 8 color photographs of drawings of a male figure in clothing which were manipulated in two levels, each of three clothing cues including type, style and color. The experimental design was full factorial design of $(2^4contex^2{\times}clothing type^2{times}clthing color^2$. Each of the 16 sub-samples includes 16 subjects from the two perceiver group. Questionnaires used to measure perceivers responses to the stimuli were 7-point semantic differential scales composed of 37 bipolar adjectives representing personal traits. The data was processed by factor analysis, ANOVA, multiple classification analysis, Duncan's multiple range test. The major findings drawn from this study were as follows: 1. Three factors emerged to account for the dimensional structure of the impressions of the male figure in clothing in two social situations. These factors involved evaluation, activity and uniqueness. 2. The contexts, clothing types and clothing styles had significant effects on evaluation, activity and uniqueness. The clothing styles had a considerable effect on both evaluation and uniqueness while the clothing types affected activity. The clothing color had least effect on the impression and had only moderate effect on evaluation. 3. Perceiver's age influenced impressions formed by the social contexts and clothing cues. Male college students were least affected by contexts and clothing cues, while middle-aged men wert affected most.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.269-276
• /
• 2012

The aim of this study is to develop clothing size system according to each size interval for obese girls aged 10~12 by classifying the upper bodies. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. Results are as follows; 1st, 5 factors were extracted by factor analysis and 3 clusters were categorized by cluster analysis, cylinder-type, inverted triangle-type and inverted trapezoid-type. And 2nd, as a consequence of size system establishment, the basic body sizes and reference body sizes were different according to types even in commonly-appeared size names at sections of respective types. The research findings above suggest that it is necessary to figure out the obesity types according to height and bust girth sizes representing basic sizes and to design the patterns in consideration of the characteristics of obese body shapes. And it may be used as a basic data to decide the desirable output of production according to respective body types.

• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.481-493
• /
• 2005

The purpose of this study is to analyze the image evaluation of tailored jacket according to the body type and the degree of satisfaction with the body of middle-aged women. The subjects used for this study were three hundred and twenty three middle-aged women ranging from 35 to 50 years old. We measured their bodies and asked them report to the questionnaire. The results are as follows. There was a significant difference in the image evaluation of tailored jacket according to the body type of middle-aged women. The women of the type I evaluated that X silhouette was the most fascinating, elegant, active, and tender, and the women of the type II, A silhouette. The women of the type III evaluated that H silhouette was the most fascinating, elegant, active, and tender, and the women of the type IV, H silhouette. There was a meaningful difference in the image evaluation of tailored jacket according to the degree of satisfaction with their bodies. As satisfied with the girth of the body, weight, and figure they evaluated X silhouette was more attractive, graceful, active, and soft.

• Journal of the Korean Society of Costume
• /
• v.42
• /
• pp.163-172
• /
• 1999

The purpose of this study is to classify the types of torso of adult females using the tight fitting technique and pattern development figure. The subjects are 106 females of 19 to 24 years old. 59 different items are measured from body surface development and analyzed by factor analysis and cluster analysis. The results are as follows; 1. Eight somatotype factors are obtained through factor analysis and orthogonal rotation by the method of Varimax Factor 1 is the length of upper body factor 2 the length of lower body factor 3 the circumference and width of the back of upper body factor 4 the circumference and width of front torso factor 5 the dart type of the back of upper body factor 6 the size of the back neck factor 7 the type of the front shoulder and factor 8 the size of the back arm hole. 2. As a result of cluster analysis the somatotype of torso is classified into 5 types. Type 1 is normal in length circumference and width of upper body. Type 2 is shortest length circumference and width of torso. Type 3 is long in length circumference and width of torso. Type 4 is normal length and short in circumference and width especially short in bust circumference. Type 5 is longest in length circumference and width of torso.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1502-1513
• /
• 2002

The purpose of this study was to find relations between construction factors and adaptability on the 5 available raglan sleeve patterns through the drafting method. Also it was to suggest a functional sleeve pattern according to appearance and adaptability test. Three women in her twenties who have standard figure was selected as subjects. Raglan sleeves of 5 experimental clothes were rated by the appearance test and adaptability test. The major conclusions of this study are as follows. 1. The construction factors of the raglan sleeve are sleeve slant, sleeve cap height, biceps line, breast width. Bicep lines increased and sleeve cap height decreased as the sleeve slant decreased. The higher adaptability scores of raglan sleeves were, the lower sleeve slants were. 2. According to the appearance evaluation, B type was recorded the highest score 3. According to the adaptability scores, A type was recorded the highest score. In the pulled length of the waist-line, A type was the lowest movements among the pattern type. In the pulled length of the sleeve-line, A type was the lowest movements among the pattern types. Therefore A type was evaluated by the bort functional sleeve pattern type. Through the experiments, it was known that appearance and adaptability of the raglan sleeve patterns were effected by construction factor.

• ETRI Journal
• /
• v.18 no.1
• /
• pp.1-14
• /
• 1996

We have experimentally observed and theoretically analyzed the gain dependent optimum repetition rates of a hybrid-type active and passive mode locked laser pulses in an erbium-doped fiber laser of the figure-of-eight geometry by utilizing a nonlinear amplifier loop mirror (NALM) as a saturable absorber and a directional-coupler type electro-optic modulator as an active mode locker. Transform-limited mode-locked pulses of about 10 ps width were obtained at repetition rates which correspond to harmonics of the cavity fundamental frequency and depend on the optical amplifier gain in the NALM.

• Journal of the Korean Home Economics Association
• /
• v.41 no.5
• /
• pp.89-97
• /
• 2003

Fitness of clothes becomes a major concern in apparel industry. But high-school boys had difficulties to buy ready-made clothes of good fit. To solve this problem, it is necessary to classify boys' upper body into several kinds of somatotypes. The purpose of this study was to classify upper body types of high school boys based on the analysis of their upper body types. The subjects for anthropometric measurement were 99 high school boys of 16 to 18 year-old. The result of factor analysis indicated that 5 factors were extracted from anthropometric measurements through analysis and those factors comprise 68.44% of total variance. 3 clusters were categorized using 5 factor scores by cluster analysis. Type 1 was taller than other types and was bending somatotype. Type 2 was straight somatotype and had average size. Type 3 was characterized by short and small figure and had bending somatotype.